Smart Hayabusa: Track day 2
Vložit
- čas přidán 6. 08. 2024
- On this episode, I need to fix the Smart before going back at the track.
Then I need to learn how to drive it and it's harder then it looks! 😅
For project plans:
Website: 57design.ca
OR
Etsy: www.etsy.com/ca/shop/VinyB57d... - Auta a dopravní prostředky
![Your Typical Corvette Driver at a Track Day [Subaru BRZ POV @ Pocono Raceway]](http://i.ytimg.com/vi/gn4w8DlPBx0/mqdefault.jpg)
OMG "Chinesium Coilovers". As always, this video is super impressive and massively underrated. Love the Smart Busa, love the video editing and most of all, love the thought process throughout. Keep up the great work!
I know! Cheap shock at 200km/h 🤦♂️ Oh right! I meant 120mph! Sorry😉
Add a turbo when you add a roll cage.... TURBO FIREBALL! 😀
I just binge watched the whole smartbusa series so far, enjoying it very much. Thanks for that 👍
Glad you enjoy it!
Lots of work on this project well done workmanship looks like Hellish lotta fun!
Glad to see everything moving in the right direction and thanks for the video and all the hard work you continue to put into this beast I know it will work out such a cool project and thank you for not giving up on it I know it has to cost a shit load of money and time.
Hey man, it's my pleasure to share that experience with you, thanks for watching and commenting it! I'm 11k CAD$ into the build and 2 solid years on building time, only week-ends and evenings!
I’ve asking g CZcamsrs to build this rig for years. Congrats on doing it first.
Very cool.
Snap over-steer is soooo much fun. One second your happy, then not happy at all. My supercharged MR2 AW11, did the same thing.
Funfunfun :):):)
quick tip on the cv joints that have a center bolt whose hole goes into the joint itself, you can use a socket (or other suitable size metal pipe etc) as a spacer in that hole and use the center bolt to pull it off the axle, like a built in puller.
Viny, this video is soooooo well done and very entertaining. Thank you! :)
Thanks Chad, Glad you liked it!
Looking forward to hearing more about smartbusa, very nice video
More to come! Thanks!
It’s a Ripper and cool car. Love that that trailer too. Great video 😊
Damn Viny, that was an awesome save! 👌 and I say congratulations on your build, to survive the track and nothing broke! Well except the rear view mirror 🤣🤣🤣
Hey thanks Handy! 👍
Thanks for your good videos!!!!
Glad you like them!
Man, you are the reason i want to build a crazy racing car in the future!
YEEEEEEEEEEEEEEEES!!! LET'S GO FRANCISCO!!!! Don't forget the YT channel and all the videos on the build, you've got you're first subscriber, right here! 🙋♂️
Sounds like a friend of mine freakin crazy bout this I told him buy a 2020ish Corvette and have LMR Late Modell Racing put 850 hp package on it fully streetable rocket!
great laughs… always, thanks😂
thanks thomas! 🤙
Very cool!
Thanks!
jme suis abonner man
jaime ben tes emissions!! lache pas
bonne soiree
Congratulations on the good track day
Great video man 💯👍
Thanks 👍 Ryan!
Impressive... congrats
Love your channel!
Thanks Tom! 🤙
Good ol red green engineering 👌
Love the build
Glad you like it!
Excellent content Vinnie!
Thanks Tom!
Amazing brother!
Appreciate it!
Loved the RedGreen reference. All the other content was on point also.
Glad you catch that one 😉
The VinnieBusa! That was sensational!
Big Thanks Benny!
maudite cochonnerie du caliss ... lol malade j'adore ton humour en francais et en anglais , dont give up ! i want more video like this
Hey merci mon ami! Le smart reviens l ete prochain...la je suis en pleine construction!! 🤯
Viny, congrats on breaking 40K subs. Your channel is absolutely one of the best out there. This entire project is beyond impressive.
Big Thanks TJ! 🤙👌
That thing sounds great
thanks man! and it does!! Don't forget your ears plugs....it.'s a nightmare without them!
I like your videos. You remind me of Misha Charudin.
Thank you so much🙏
Calvaire! Bien fait Vincent!!
Marci Marc-An!
Ooo the downshifts👌👌
Oh yes!!! Sequential baby!
Beautiful MUSIC coming out of the Exhaust Pipes !! 🎼🎶🎵
Glad you like it!
Much better than the crap he adds
New subscriber from Las Vegas Nevada love that smart car I wish I could find one already converted with that same motor in it and tow it behind our RV lol. Have a awesome day my friend.
Hey thabks Rick 👌Have a good one too
looks like a blast real fun try rev matching on your down shifts could stop some excess sliding
I ve got a lot to learn!
The sound is just ridiculous 😂 is like a dragon trap in a go kart 😂👍
yep! 😎
A Red Green quote. Nice!!!!
thanks 😁
This build is crazy 🔥
Thank you! 👌
Great video Vinnie ! Glad you finally had a good day at the track ! Don’t know why you don’t have the smart Busa licensed for the road ! Be an awesome road car and a real surprise for unsuspecting civic drivers!!! 😂
Who said it wasn't license....😏🤫
@@VinyB57 I want to see some street pulls and ripping through your home town !! Tim Hortons drive thru maybe 😊
11:00 LOL!! I have that too whenever I crash with the car. It comes with experience I guess 🤣🤣🤣
Yep that's a weird human feature, to have all that time to think in a split second during dramatic events! 🤔
Well done this is a big succeed.
Thanks! 👍
Good show mon vieux ! Content que tu n’aies pas embrassé le mur !
Hey Salut JD, tjrs en un seul morceau! 😉
Time to take the Smartbusa on a road trip. I bet you could do collabs with a handful of other channels. The Hoonigan guys would love to see this in their yard. I bet you would hit 100K after a few collabs. Try Superfastmatt too.
Yeah... that could be really nice, but I'm still working full time....so a road trip is out of the question for now, don,t have the time and don't have that have enough of that youtube money😅! But you,re right tho, I should reach out to superfastmatt...I don,t even know if he knows that I exist...but I'm a big fan! Thanks for the comment Steven 🤙
Loved the Red Green comment: "If the women don't find you handsome, they should at least find you handy."
Awesome video yet again!
Glad you pick that one up! 👍
great car
🤙🤙
Oh yeah 🤙 Thanks!
As a french speaking guy from Belgium, i always crack up when you switch to your canadian accentuated french with "cette Saloperie" :'D
Happy that you met your childhood Hero, and that little track car is sick !
Et bien merci Kevin, je pense l'inclure plus souvent dans mes vidéos maintenant, faisant ainsi un clin d'oeil à la communité française qui me suit! 👍
@@VinyB57 hahaha, de bons fou-rires en prévision ! Vivement les suivantes !
Hello from the Netherlands and thanks for the video.
Sincerely, Hollandduck
Hello there! Thanks man!
would be fun to have a hayabusa smart racing class
Anytime!!! 🙋♂️
Out of solving the starting problem I also see that that u had hydraulics on your tow carrier way too cool 😎🆒🇯🇲🇺🇸
Yes and no, It's not hydraulic, it's pneumatic, I builded that trailer too and have a mini-serie about it on my channel! And thanks for the comment! 👍
Really impressive Viny!! Awsome work! Probably THE fasttest Smart ?!🤣
Hey ti-gui from the West! C'est ce que mon gars dit...c'est la smart la plus vite du monde...bon p-t pas, mais elle risque de le devenir avec les année....et toi..comment va ta carriere youtube...avec ta dernière question sur le 1000subs...
I just bought a little scion iq and have been tossing the idea of, shall we say, upgrading it. Haha! Loved the video and the inspiration it is giving me!
Have you driven this little beast at Mosport yet (Canadian Tire Motorsport Park)? It would absolutely smash the DDT there!
Hey thanks McCoy...For now, the Smart is far from ready for bigger events... Regarding your ''upgrading'' questionning, well if you really, really, really wanna do it...well just do it... but if you're not sure..DON'T! It's an insane amount of work and a not such a good platform to start up with..😅
"Having a real trailer..." says the guy who has an air ride suspension trailer. I literally laughed out loud.
Baring in mind I can't wire up a plug with out you tube
You saying your not a machanic gives me hope 😂😂
Great to watch your childhood dreams come true .... welldone sir
Hey thanks Dean, and yes there's always hope....well most of the time, there is! 😅
Ben voyons sti comment ca j ai jamais vu tes videos dans mes suggestions ..sont écoeurant sérieux 🤣🤘
Merci Alex 🤟
And a turbo!😮😂
et du coup comment sent tu le freinage ? pas trop dur a la pédale ? course suffisante ? assez progressif ?
How did you handle reverse gear
Do you was able to check max speed or horsepower?
I'm owing a smart 451 CDI with a legal street license called Smartonator! Runs up to 170km/h and about 85hp.
At about 3000rmp at 130km/h for long distance chilling driving.
Brought it 8 years ago with 11.000km, tuned it and now I'm on 180.000km and the car runs well. Tires was a problem, most start to wobble at about 140km/h after 20.000km. But I found the right one for the front from Uniroyal. Amazing smooth at all speeds and grippy at rain also. Anyway.. Really like to see your next part on track!
Hope you wore your brown pants. Congrats on the success’ish outing. Looking forward to the updates.
🤣 Nope..at first, they were not brown, but now....
Super vidéo encore une fois: Give a try at rev-matching when downshifting.(a bit harder in a car to heel and toe then on a bike with only a quick wrist mouvement). Your non synchronized dog engagement gear motorcyle transmission will thank you ;)
Yes, I still need a lot of time seat to master it....I do master it on my daily civic tho! 😅
A lot of bikes have oil in the stator. It’s ok. Some do not. One of my bikes. Maybe both. It’s ok. It does help cool it. So nothing to worry about
Beautiful work :-)
If you're going for increased grip, are you planning on a dry sump at any point?
At a certain point, I will....hope I won't pass tht point to late! 😅
@@VinyB57 My mate has solid models of one he designed if you'd like to cut (or have someone cut) your own, he'll only charge a small fee for the models :-)
Have you considered going the dry sump route? Bike engines are design to lean on corners, putting it on a car prevents it and the oil splashes around away from the pickup. This is a huge problem, especially on track with long corners where just a few seconds of oil starvation will ruin that awesome engine. Check Super fast Matt channel and his CBR1000 powered Honda s600 he explains it very well.
Yes Mike, I'm worried also about this, Matt did cut the narrow, lowered oil pan section, I didn't, I should be ok, but still, I'm worried too! 🤔 I think has much on that oil pressure gauge then on the road!
I can hear on deceleration your back wheels are being braked by the engine. That would definitely create instability in the rear and make corner entry dangerous. A slipper clutch is out of the question now I guess so you might need to run traction control to stop the negative torque effect of the back wheels. Just a thought. :)
yeah you're right, I'm too rough on that clutch, I need more time seat to get that rev match nailed!
Aye super SmartBusa !!
Bravo 👏 , a t'coute combien jusqu'a present?
Me semble, que je suis prêt du 14k, avec les nouvelles roues et suspension que j'avais pas à l'époque de ce vidéo...
wow 🤩 amazing 🙌🏻 have you ever thought on selling the smart car ??? pls advise
Not ready to sell yet...😉
Kind save it? You did save it, amazinlgy so. 👏👏
Great to see a new episode and a success.
Yes chinesium shocks with fake piggyback reservoir need to go, but of course *money money money*
Once replaced them could you safely cut the piggyback to confirm or deny that's fake and unconnected to the main body?
Dude, there's 2 of you who suggested to cut them...wanted to save them for another (way smaller project)..but wonder now..🤔 Maybe I'll cut them just to see! 🤷♂️
@@VinyB57 Mind-hive effect or maybe it stems from seeing certain big shill channels promoting crap products and comparing them to proper shocks, or even saying they are better and safer than brand names.
Nothing to do with your awesome and sadly not huge channel.
Thank you for answering.
great as always lad ..... no one as far as I know has ever used 2 motors can it be done ? if anyone could you would be the guy ,,,do a Patreon i would be happy to contribute for another motor just to watch lol
😁 hey tanks John! And no I never seen double Busa in a smart, I saw double ''combine'' busa as a V8 in a small racing car, but never 4x4 double engines! For sure I'm turbo-ing that engine, but who knows, maybe one day I'll double it 🤷♂
What top speed is it geared to?
Use yamaha r1 09-14 rear shock. they cheap (used) 100$ but rly great choice for your track car. pre load, compression , high/low speed rebound. Try them!
thanks for the tip man! 👍
Awesome stuff, really like the “virtual” formula sound of the car. Seemed too stiff the suspension for the track, way too hard compression and slow rebound as it looked bouncy. And make the cage before it’s too late, you almost where too late already.
Yes, yes, and yes to all you said...but I pretty much mentionned all of that, at the end of the video 🤔😅
@@VinyB57 Yeah, I have a bad habit of commenting in the middle of the video. But anyways safety first, no matter how fun you're having.
I need this as a daily. Hm wondering what would it take to make it street legal....
Hey what air trailer is that you have there? I love how it deflates and gets super low. please give me more info on that and also are you from Quebec?
It's one that he built himself, he sells plans on his website to build them in a single or tandem axle system.
Couldn't reply better! Thanks! 👌 website for plans: 57design.ca
@@miniyota3ur oh damn ok, im new to this channel didn't know he had plans for that trailer build! Awesome!
@@VinyB57 bain est ce que tu vie proche de Montreal? J'aime de voir votre Busa smart pi votre trailer.
I WANT A SMARTBUSA!!!!
I know! 😬
Maybe add a metre into the chassis length to keep it pointed ?
Ziemlich verrückt und in Deutschland hättet man Euch schon eingefangen 😮 !
Es ist p-t google tranlate, wer falsch übersetzt hat, aber was erwischt hat?
@@VinyB57
Euch hätte man in Deutschland schon gefangen genommen…!!!
Damit hätte man Euch in Deutschland auf der Straße verhaftet…!
@@eduardnolte4343 Das ist sicher, selbst hier in Kanada würde ich nicht lange reiten, bevor ich verhaftet werde!
Put a differential and engine and trans side ways and convert the sprocket to a drive shaft like legend race cars.
I'm not redoing that car again! 😅
Do you have issues with the clutch burning out with the extra weight of the car?
Not yet...😅
Spending $350 to replace a part that’s not broken… Ouch! Haha
Btw again a video with insanely good quality! Can’t imagine how much time you spend on a video.
Hey thanks Lars... I may have cleaned and returned the stator...I may...🤫
It takes arounds 1.5 to 2 hours per minutes of editing for each videos I upload. You do the math...😉
@@VinyB57 it’s nice you take the time to edit and give us amazing content with every video! Thanks Viny! 🙏🏻
Have you ever tested the 0-60 if so what time did u get
No never tested it, but a bike engine is low in torque, so it's probably a shitty 0-60 that I'll get!
You must mount a quick shift, painfully slow gear changes.
Yes I have a couple of option for the future, but for now I do love my shifter, I have so much things to master first on my side, before improving the car itself!
well damn, I discovered today you are another quebecer of probably the same region as me (in Montérégie), I never knew there was track days at Sanair, atm I am planning to buy a Chevelle 75 for the fun, but I don't know what car to buy for a track day car, any suggestion?
Minis man! I've got some friends that race them and they are a blast to drive...also miatas, civic if you have a smaller budget and Ford RS and all the big guns like Type R and TRD cars are the best package for good track days..and yes I'm into japanees more then Europeen and US cars
@@VinyB57 Looking at some of them and I can see the modifications possibilities on it and it can get crazy, I may go with a Mini, they are unfortunately expensive (most of them are over 13 000 $ and mainly recent that are listed) but I am sure a cheap one will appear one day, seems very fun to drive compared to my Chevy Sonic (suprisingly fun to drive as well).
Who built that cart? I'm referring to the trailer that goes up and down with air.
me...I have 4 videos on it (same channel as this video) and I'm selling the plans too.
*looks out at my black 2011 fortwo,and is sad*
Go for Öhlins shocks, theee best for racing.
Thanks for the tip, I checked them online, maybe a bit out of my budget!
Dude you need a roll cage. You should have done that in the first build.
This track needs an new asphalt overhaul.....i dont think very low cars love those cracks
Could you drive that as a daily driver?
Yes and no...the sound is unbearable and you smell oil and gaz after a run...cuz I'm literally sitting on the engine! 🤦♂️
If you chamge gears from flappy paddleson steering wheel - just imagine !
look up top gear and them smashing a smart car into a wall.....the only car built around a very very strong cell...not a cage but you will see you as a person will die before the cell bends or cracks. super strong car
Hey man! You should really turbo this thing! I have turbo on my 1300 hayabusa engine. Inside a radical sr3..
Im
Beating 1000cc motorbikes from 100-200kmh🤣
Dude I google sr3...that's a proper race car mate! Do you have any idea which turbo or turbo kit you have on your RS3?
@@VinyB57 hõla.. yeah sure, its s GT3076R turbo. With CP carillo turbo pistons and rod. Not exactly a complexed build but its durable when done right;)
My channel wad hacked and deleted so i lost alooot of vids, but i uploaded couple so you can see the car! What you drive now is fun, but NOTHING compared to the potential of the engine witht boost! Just 15psi is enough to leave some poo🤣🤣🤣🤣
Another great video. Before building your roll cage, check the email attached to this channel.
Never mind, I found the e mail, my bad
OK!
Finaly- thoses shocks arent worth anything if you dont surevive..... OK?! NUMNUT.......Nice to see you again, and Nice CAP......Buy....?
Hey, I'M still fully alive! I know I was pushing my luck...thanks for the CAP, but no, not for sell YET!! I need to take care of my murch one day!
@@VinyB57 sorry if I feelt better I could take care of your merch, but I cant....
About Chinese motorcycle shock - pls chech tру top red cups (with text RFY), i think its fake, just for beauty
I did check it in another short video...this one is linked!! I was quite surprise too, so not fake...still shity tho..😉
It's called a pick up coil, not a crank sensor. Just so you know dude 😎
P.s The ecu is restricted on the 1st 3 gears on some Hayabusa's. Get it unlocked!.
you re 100% right! My mistake, somebody at the track called it this way and I kept the name I guess...🤷♂️
Hat das Fahrzeug ein Differenzial ?
Ja, ich habe ein individuelles Modell erstellt und auf meinem Kanal gibt es ein Video dazu
Congrats on a successful track day. If only my wife would let me do something with her fortwo.
Good luck! 😅
npw a turbo💪💪💪💪💪💪
Oh yeah....I'm thinking about it! 😬
Next video changing suspensión... !!
Probably! 😁
T'es rendu ou avec tes projets? Salut de Saint-Eustache ''beach''...........................
Et boy!!! Ben j ai fait ben des projets depuis, je manque considérablement de temps pour tout faire! Là, je viens de finir ma mini série sur une fixture table et je commence un autrrle projet dès demain!!
@@VinyB57 À suivre donc... A+
Think that is street legal?
Not any more! 🤷♂️