In today's video we continue to strip down the Audi R8's engine and see how much it will cost to rebuild and also check out the condition of the engine. Instagram: Saving_salvage
You are a remarkable chap -not just the job itself but filming and editing it all into an absorbing upload . You deserve success here and clearly have a growing following which proves the point . Excellent !
Dean I take my hat off to you mate, I don’t know your level of engineering but you sound absolutely confident in this rebuild, you deserve every success in this but it does look daunting. Absolutely looking forward to this step by step build, you are an absolutely remarkable talent 👋👋👋
Hi from Durham Dean 👋 👍 that bearing on crank is called pilot bearing for final drive/input shaft 👍 and I hope the few bits turn up quicker for you and space and memory ( easier with fresh brains I mean for what goes where In what order ) lol can't wait tho seems like you got some good support at end of fone too mate 👌 thanks for your time be safe and see you soon 👍 👋
Think the big end bolts and main bearing bolts are ment to be one time use only, unfortunately if so that's another expensive email, if he does change them
9:05 you should definatly change the Timing Chain Spokets as well the lower ones look rather worn. Also i dont think it is a good idea to not at least change the oilscraper rings
Glad to hear the engine replacement is sound. That's a lot of parts to put together so hats off to you Dean for taking it on. Great channel, always worth a look. Good luck mate
I can’t believe how calm you are in the face of all them bits! And the task ahead. I’d be huddled up in the corner of the unit twanging my lips ! Even if I managed to get it back together there’d be loads of spare bits left over and one gone awol in the block somewhere. Fair play Dean your one hell of a mechanic. Shaping up to be a class video editor too! Can’t wait for the next video ……..
As always you show no fear taking a beast of an engine apart Dean. The rain was was clearly coming down when you recorded this, I had to look outside it was so clear over the speakers, good luck with the rest of your build.
Great work Dean. Back to my days working on Lotus and Italian performance cars it's always amazing how much workshop bench space this sort if work takes up. You're doing a great job!
As you suggested yellow in German is 'gelb', hence 'G'. Fascinating to see how you work, and I'm intrigued to see how the rebuild goes. Many thanks for sharing & good luck!
You due some fantastic jobs love watching your videos you explain very clearly what you doing I'm a motor engineer but 80+years of age so get a lot of pleasure whenever I see your videos keep up the fabulous work stay safe and healthy Phil
Hats off to you, wish I had the confidence to take on major open heart surgery! You have inspired me to have a go at rebuilding my 'ickle MGB engine and doing the chain/guides on my full fat Range Rover.
I really do like your channel, Dean, and really respect the way your doing this all. I'm from the Netherlands, so it's a pity, I won't be able to buy any car from you. Taking this engine apart must be an adventure. Looking forward for pt 3. Good luck!
thank you Dean,,a very enjoyable part 2,, hope the parts arrive asap,,talking of parts 10/10 for having a memory and the skill putting that lot back together,👌👌
Thanks Dean for the detailed breakdown of stripping your R8 engine. You made it look simple & straightforward, but I think this job is definitely not for the faint hearted! Well done & good luck with the next stage of this interesting rebuild 👍
Excellent Dean great viewing , maybe add a little music when you are doing the time lapse ? As it sounds a little bit Benny Hill lol you have a great memory for the year downs and rebuilds 😎
Great job, you’re super thorough. Audi’s have been renowned for cam tensioner/chain pin wear (stretch). My Dad’s A4 3.2 Quattro with only 40k kept throwing cam/crank sensor faults. The car needed new chains and tensioners. Obviously a crap design or poor manufacturing. Makes me prefer cam belts if I’m honest
Tell you what Dean, I would not even attempt to rebuild that engine, the work involved is just Faaaaaa. Well done m8, I look forward to seeing it done.
Great engine layout dean,I wouldn’t have a clue,I’m ok with a ford pinto,or a mini engine,that is way way beyond me mate. Can’t wait to see the assembly,no frills, no bullshit.💪💪
I made a comment about the state of your workshop the other day but having watched this video I have to take my hat off to you for your organisation of this tear down and also admire your bravery 😅😅😅
Fair to say, at £5k for the engine, £3.5k for parts, and another grand for sundries, you'll have a new engine for half the cost of one from Audi? Winner, mate.
Great work Dean - so well documented - That R8 will be a proper job when she is done ! You just show that there's nothing to fear ! I'm just riveted in this build, fascinating- Dont worry we will all wait for the parts to come, Audi are sound on the prices - Great stuff!
Dedication!!! You have a job, rebuild various cars in your spare time and then edit and post your videos , Do you ever sleep???? After finding your channel I now watch other guys rebuilding industrial machines , guys stripping and rebuilding tanks and various other channels, just the same as you but maybe not quite as finessed and obviously much bigger socket sets! Whilst awaiting your next post, Keep up the great content!
Fantastic, it's really outstanding that you can rebuild such a complicated engine like that without help. And making these excellent concise videos of it too. I think you could probably be successful at many things. Well done.
Great work mate watched your knowledge and channel grow, have subscribed and got all my family to also, now to get my mates on board love the golf r content keep up with the excellent work and video's
I've done engine rebuilds myself in the bone by but you're looks mind boggling to watch, parts price not bad considering, looking forward to watching your expertise putting it back together, top job Dean, as always.
Those chain guides look just well used honestly however they are extremely worn for such a low mileage engine I had a 2006 Camry with 300,000 mi (482000 km) on it and it had similar wear so yeah they must use the cheapest plastic on planet Earth over at audi
Another great video fella, how the hell will you remember where everything goes! Looking forward to seeing it up and running! Did you ever get to the bottom of the Skoda Octavia dpf not re gening?
Great job Dean. A frightening amount of dismantling and parts everywhere. The pistons and conrods sat on the edge of a small granny table were making me feel uneasy though. 😂
Hi Dean, I have an R8 in the V8 version and I recently had a fire in the engine, apparent cause was a cam shaft solenoid. Just came to mind whilst you were taking apart the engine, just wanted your thoughts please. Thanks Raj
tip new rings not necessary unless it has been hot just cleaning may be a quick ball hone [ deglaze ]as for ring gap we routinely add loads of gap for turbo charging with no ill effects
Looking forward to seeing that engine running. I didn’t realise you were local to Cambridge, I’ll keep an eye out for the R8 on the road…hopefully soon.
Well done mate on the thoroughness I’ve rebuilt 3 or 4 of the v10 fsi engines in my time under workshop environment and I can tell you it’s not pleasant having service managers on you’re case when trying to rebuild 20k plus engine if your not doing it right don’t even waste you’re time very well done sir
The bearing at the rear of the crank is actually the pilot bearing and they put them in both DSG and manual transmissions I'm pretty sure automatics don't have them but I don't know
"Reassembly is the reversal of disassembly" as Haynes says 😂Good luck, I'd be having a meltdown dismantling something of such value that could potentially end up costing £££ more due to one stray fixing or mistake! Props to you 👊
I am french and I really love your chanel even if it is difficult for me to understand half of your explanations 😂.You look very sympathic ans it is a real pleasure each time.Have a good day.
great vlog..you got some balls taking on your projects,,i understand you buying genuine parts from audi..have you ever sourced after market suppliers??..some times if you get the right manufacture there better than OEM parts at a fraction of the price..especially with them timing tensioners..someone must make them better quality..maybe an audi tuning company..and better quality....your skills are amazing..but why not if doing a full rebuild make the engine tougher than OEM and maybe cheaper to build..
You are a remarkable chap -not just the job itself but filming and editing it all into an absorbing upload . You deserve success here and clearly have a growing following which proves the point . Excellent !
Thankyou mate! Appreciate it 😊
@@SavingSalvage Only speaking the truth -as I find and see it . Appreciate these uploads in the present format (without gimmics !)
exactly, please dont change
Takes engines apart like he's playing with Lego. Master of V8 rebuilds keep the videos coming
Agreed 👍🏼
Love the in depth explanation of things, clearly know your stuff. Love the channel and don’t miss an episode. You deserve this channel to blow up!
Much appreciated bud! I hope so 🤞🏼
Dean I take my hat off to you mate, I don’t know your level of engineering but you sound absolutely confident in this rebuild, you deserve every success in this but it does look daunting. Absolutely looking forward to this step by step build, you are an absolutely remarkable talent 👋👋👋
It's so complicated from my point of view and I admire your confidence in tackling it. Thank you for the insight.
Glad it was helpful!
Looking at all of the parts on your bench gave me palpitations! Another great update on the engine rebuild. 👏
Glad it’s not just me! It’d all go back together but it wouldn’t be an R8 engine when I finished!
As soon as I saw that bench I thought "hope that doesn't collapse".
@@bob900868 When the pistons were right on the edge...YIKES
Hi from Durham Dean 👋 👍 that bearing on crank is called pilot bearing for final drive/input shaft 👍 and I hope the few bits turn up quicker for you and space and memory ( easier with fresh brains I mean for what goes where In what order ) lol can't wait tho seems like you got some good support at end of fone too mate 👌 thanks for your time be safe and see you soon 👍 👋
Proper Job! Well done Dean on being extremely thorough and whoever is the lucky buyer of this R8 can be sure it was done properly.
Think the big end bolts and main bearing bolts are ment to be one time use only, unfortunately if so that's another expensive email, if he does change them
9:05 you should definatly change the Timing Chain Spokets as well the lower ones look rather worn. Also i dont think it is a good idea to not at least change the oilscraper rings
So glad you don’t put terrible music over your Timelapse bits. Thank you.
Glad to hear the engine replacement is sound. That's a lot of parts to put together so hats off to you Dean for taking it on. Great channel, always worth a look. Good luck mate
The bearing in the end of the crank is called a spigot bearing, its for the main shaft in the gearbox
I can’t believe how calm you are in the face of all them bits! And the task ahead. I’d be huddled up in the corner of the unit twanging my lips ! Even if I managed to get it back together there’d be loads of spare bits left over and one gone awol in the block somewhere. Fair play Dean your one hell of a mechanic. Shaping up to be a class video editor too! Can’t wait for the next video ……..
As always you show no fear taking a beast of an engine apart Dean. The rain was was clearly coming down when you recorded this, I had to look outside it was so clear over the speakers, good luck with the rest of your build.
Best car salvage / rebuild channel on CZcams at the moment. Thanks for another video.
Great work Dean. Back to my days working on Lotus and Italian performance cars it's always amazing how much workshop bench space this sort if work takes up. You're doing a great job!
As usual Dean top videos broken down enough that thick people like me understand. Cheers
To have a lower than expected quotation from VW is rare. Best of luck getting the engine together again. Tanks for the awesome videos.
Really enjoying your videos on the R8 and the style of the videos, thank you for putting the time in to make them, all the best
You’re knowledge of Engines just blows mine mind! 🤯🤯🤯🤯
shout out to the unsung hero's Partsmen!! quietley knowing every other extra part a mechanic needs for a job!
This man has a serious talent I'd buy any car from him
As you suggested yellow in German is 'gelb', hence 'G'. Fascinating to see how you work, and I'm intrigued to see how the rebuild goes. Many thanks for sharing & good luck!
Fascinating. Unbelievable the amount of parts that goes into one of these engines. Looking forward to the rebuild
Woop here we go! Great stuff. Coming apart nicely! Yellow is Gelb auf Deutsch
You due some fantastic jobs love watching your videos you explain very clearly what you doing I'm a motor engineer but 80+years of age so get a lot of pleasure whenever I see your videos keep up the fabulous work stay safe and healthy Phil
Hi Dean. Confidence on this rebuild id 100%. You sir are a "STAR" See you in the next one, ✔✔✔✔
Hats off to you, wish I had the confidence to take on major open heart surgery! You have inspired me to have a go at rebuilding my 'ickle MGB engine and doing the chain/guides on my full fat Range Rover.
What a level of skill and knowledge required! I’d be nervous taking the engine cover off! You must have a lot of experience with engines
I really do like your channel, Dean, and really respect the way your doing this all. I'm from the Netherlands, so it's a pity, I won't be able to buy any car from you. Taking this engine apart must be an adventure. Looking forward for pt 3. Good luck!
Hi,Dean! Great videos for us carlovers to watch from start to finish ,Geat!
You have to get a hydralic table to save you back on all jobs!
thank you Dean,,a very enjoyable part 2,, hope the parts arrive asap,,talking of parts 10/10 for having a memory and the skill putting that lot back together,👌👌
Thanks Dean for the detailed breakdown of stripping your R8 engine. You made it look simple & straightforward, but I think this job is definitely not for the faint hearted! Well done & good luck with the next stage of this interesting rebuild 👍
I love the sellotape roll tool. Genius! I actually LOL'd.
Excellent Dean great viewing , maybe add a little music when you are doing the time lapse ? As it sounds a little bit Benny Hill lol you have a great memory for the year downs and rebuilds 😎
Absolutely hooked on your content Dean. Excellent and informative. Keep it coming....... Take Care .
Looking forward to the next video, absolutely love the engine rebuilds!👍🏼
Great job, you’re super thorough.
Audi’s have been renowned for cam tensioner/chain pin wear (stretch). My Dad’s A4 3.2 Quattro with only 40k kept throwing cam/crank sensor faults. The car needed new chains and tensioners. Obviously a crap design or poor manufacturing. Makes me prefer cam belts if I’m honest
Great content mate. I really enjoyed this one❤️
Tell you what Dean, I would not even attempt to rebuild that engine, the work involved is just Faaaaaa. Well done m8, I look forward to seeing it done.
Blown away with the detail you give in your content 👍
Great engine layout dean,I wouldn’t have a clue,I’m ok with a ford pinto,or a mini engine,that is way way beyond me mate.
Can’t wait to see the assembly,no frills,
no bullshit.💪💪
Loving this engine rebuild, best of luck putting that very expensive complicated puzzle back together, I take my hat off to you for doing this.
I made a comment about the state of your workshop the other day but having watched this video I have to take my hat off to you for your organisation of this tear down and also admire your bravery 😅😅😅
Fair to say, at £5k for the engine, £3.5k for parts, and another grand for sundries, you'll have a new engine for half the cost of one from Audi? Winner, mate.
Absolutely amazing what you do ,especially having a job and family. Please keep them coming
Great video Dean :) Looking forward to the build!!!
Great work Dean - so well documented - That R8 will be a proper job when she is done ! You just show that there's nothing to fear ! I'm just riveted in this build, fascinating- Dont worry we will all wait for the parts to come, Audi are sound on the prices - Great stuff!
Dedication!!! You have a job, rebuild various cars in your spare time and then edit and post your videos , Do you ever sleep????
After finding your channel I now watch other guys rebuilding industrial machines , guys stripping and rebuilding tanks and various other channels, just the same as you but maybe not quite as finessed and obviously much bigger socket sets! Whilst awaiting your next post, Keep up the great content!
👍Great Job Dean, things are looking up !! Keep up the good work 👍
Can’t wait to see that engine purring, and car on the road , hope you make a nice profit for all the hard work.
Fantastic, it's really outstanding that you can rebuild such a complicated engine like that without help. And making these excellent concise videos of it too. I think you could probably be successful at many things. Well done.
Great work mate watched your knowledge and channel grow, have subscribed and got all my family to also, now to get my mates on board love the golf r content keep up with the excellent work and video's
Always knew it as a spigot bearing 🤔
Another belting video... these are just getting better and better.
I've done engine rebuilds myself in the bone by but you're looks mind boggling to watch, parts price not bad considering, looking forward to watching your expertise putting it back together, top job Dean, as always.
Great video Dean. Looking forward to the next one.
Those chain guides look just well used honestly however they are extremely worn for such a low mileage engine I had a 2006 Camry with 300,000 mi (482000 km) on it and it had similar wear so yeah they must use the cheapest plastic on planet Earth over at audi
Another great video fella, how the hell will you remember where everything goes!
Looking forward to seeing it up and running!
Did you ever get to the bottom of the Skoda Octavia dpf not re gening?
Just looking at that invoice they didn't even give you trade discount 🙄, great video as always keep going mate
Did you by chance have a meccano set as a kid .. great video 😄
What jon yoda said - an excellent effort and channel, squire!
I respect anyone who can work with their hands like this
Great job Dean. A frightening amount of dismantling and parts everywhere.
The pistons and conrods sat on the edge of a small granny table were making me feel uneasy though. 😂
Hi Dean,
I have an R8 in the V8 version and I recently had a fire in the engine, apparent cause was a cam shaft solenoid. Just came to mind whilst you were taking apart the engine, just wanted your thoughts please. Thanks Raj
First a little thumbs up to help out and then a nice relaxing viewing of your awesome video ❤
Thank you 🤗
tip new rings not necessary unless it has been hot just cleaning may be a quick ball hone [ deglaze ]as for ring gap we routinely add loads of gap for turbo charging with no ill effects
Brilliant work Dean. Was expecting a partridge in a pear tree on your parts list!
Fantastic Project, can’t wait to see the install and startup
The big end bolts and the main bearing bolts are stretch bolts ( one use only like head bolts ) believe I may be wrong but most VAG cars are
So admire your work commitment and skill to do what you are doing. Look forward to next one. 👍👍👍👍
Looking forward to seeing that engine running. I didn’t realise you were local to Cambridge, I’ll keep an eye out for the R8 on the road…hopefully soon.
Well done mate on the thoroughness I’ve rebuilt 3 or 4 of the v10 fsi engines in my time under workshop environment and I can tell you it’s not pleasant having service managers on you’re case when trying to rebuild 20k plus engine if your not doing it right don’t even waste you’re time very well done sir
Brilliant video again Dean.. Just a quick question how is the chassis for the tvr going.
Well explained and shown Dean. Damned if I would have a clue where to start. Cheers, Bob
Great video Dean. Price of the parts was excellent - I would have put it closer to 3.5k.
Price for the parts seems reasonable. Good luck! Waiting for next video in this series 😎
Dean
Brilliant job you are a brave man to many parts for me keep up the great work
John
Spigot bearing for gearbox input shaft . Cool video chap keep it up buddy
Amazing work to undertake that job.
Smashing it mate 👌
Keep up the good work
What's happening with the tvr
The bearing at the rear of the crank is actually the pilot bearing and they put them in both DSG and manual transmissions I'm pretty sure automatics don't have them but I don't know
Great Vid, got me hooked from day 1, on this R8 engine strip & build, talk about a thousand piece jigsaw🥴
Nice job... the main bearing are color coded specific
Ouff! You're the man! That engine is a bear!!
"Reassembly is the reversal of disassembly" as Haynes says 😂Good luck, I'd be having a meltdown dismantling something of such value that could potentially end up costing £££ more due to one stray fixing or mistake! Props to you 👊
Amazing the engineering and design that goes into that engine...
Great job Dean really enjoy the videos 👍
Hehehe I don't know what I'm doing here, but I like it.
Excellent content keep the videos coming 👌 less than 3 grand for a rebuild on a r8 I think is fairly good price these days
Great video Dean so that’s going to be about £7,000 with purchase of the engine 😳
I am french and I really love your chanel even if it is difficult for me to understand half of your explanations 😂.You look very sympathic ans it is a real pleasure each time.Have a good day.
Great channel really enjoy your videos 👍🏻
I swear Dean if you were a garage owner I wouldn’t take my car anywhere else, top quality
great vlog..you got some balls taking on your projects,,i understand you buying genuine parts from audi..have you ever sourced after market suppliers??..some times if you get the right manufacture there better than OEM parts at a fraction of the price..especially with them timing tensioners..someone must make them better quality..maybe an audi tuning company..and better quality....your skills are amazing..but why not if doing a full rebuild make the engine tougher than OEM and maybe cheaper to build..
Another great video and we don't mind waiting for the next one well done
You need a bigger audience.👏👏👏
Bet Dean has nightmares trying to remember where everything goes back together. Looks a decent engine though, 👍
Love the videos keep it up pal hopefully have that audi purring in no time 👍
Excellent video and in depth explanation too 👍
Don't forget to check the block faces.. possible will require facing. Especially if its been hot..