When it came out, the PF9 pretty much eliminated any excuse for not being able to carry a 9mm pistol. I've had mine since 2010, and have never regretted the purchase.
Bought one in 2017 - nothing could touch it for 9mm concealability and convenience. Shot it apart and KelTec rebuilt it no questions asked. It always goes BANG and I carry it everyday. Man-boys don't like the recoil cause it messes up their manicure.
I have one, it’s not fun to shoot cause it kicks like a mule. That said over a 1000rds through it, zero problems. I don’t daily carry it, only when I’m wearing gym shorts and making a really quick run somewhere.
I've had one for about 9 years. I've only put about 1000 rounds through it, because at 12 ounces unloaded, it is a bit of a beast to shoot. But I have never had a failure of any kind. I bought it for wearing nicer clothes when a larger gun would be more difficult to conceal. It is the only Kel Tec I own, and do not understand the hate it receives. I recently replaced it with the S & W Shield 2.0 as my EDC, because the recoil was more manageable. But it is still noticeably heavier than the Kel Tec. I'll never get rid of it.
bought mine for 87$ out the door at the pawn shop shot it just over 500 rounds before it jammed never cleaned it love it and mine will take another round in the clip best gun for the money
Once you take to the range, you'll figure out why it was carried a lot, and shot very little. Great carry gun, but it is not fun to shoot. Even with the pinky extension, it's tight squeeze to get all 3 of my fingers on it, and I don't have large hands. Any 9mm under 13oz is going have a lot of recoil, regardless of costs or quality.
My kel tec pf9 and p3at were bought in 08 both run flawlessly i own glocks ,cz,smith wheel guns i carry my kel tecs a lot because they are light and work i did polish the barrels and feed ramps and replaced mag releases and mag springs over the years.
I really like mine. Great to carry and I can hit with it pretty good. Only drawback is it bang's the hand kind of hard. I almost never get through a 50 round box at the range.
I never knew so many gun mfg. to copy garbage! don't know about p9 or p11 but my pat380 is still shooting great after 20 years of carrying abuse. I think you did ok on that buy.
I know this video is around 3 years old, but I just stumbled on it a few minutes ago. I wish CZcams allowed pics in comments because just last week I picked up a little PF9 that I think beats yours for it’s pitiful state. But, I fell in love with it the second I picked it up anyway. It must have been someone’s EDC/CC because it’s got holster rash and specific marring that looks like some sort of polymer slide holster. For less than $100 out the door though, I couldn’t complain! I am hopefully going to get our finances in order eventually, and pickup the MCARBO upgrades that are available. It looks like they will bring all new life to the poorly neglected little fella. 😁 Too bad we can’t post pics. lol It looks like it’s had one hell of a life.
Lets see the pf9 update video. I just pulled mine out of the safe for the first time in about four years. I forgot how slim and light it is. However, I have not forgotten how unpleasant it is to shoot.
I just picked up one as well. I upgraded to steel guide rod and enhanced recoil springs because I have heard the recoil is a little bit unruly. I am curious what your thoughts were on that detail after you went to the range.
I've had mine for about 10 years do some basic up grades like a metal push rod and a new springs n it's all good.. how ever I did notice with the extended clip some times has a hard time cycling any 1 else?
I love my kel tec pf9 9mm but the down side is dat the maximum the clip can hold is 8 from the +1 I was looking for a extendo for it but can't seen to find one I heard about the lcp ruger 9mm clip can fit in the pf9 but I'm not sure if anyone knows a other clip that can fit in the Kel tec pf9 9mm let me know
I have several more expensive and most definitely better choices of firearms, but my favorite carry gun is my little PF-9. I've had for 8 yrs and was lucky enough to get one that works consistently. I almost always use full metal jacket ammo, as most hollow points, except Hornady Critical defense have been unreliable. The trigger pull is something to get used to, but I have. It used hurt like heck on reset, until I heated it and reshaped it. of Course I polished the feed ramp and smoothed off all sharp edges on the grip. fifty rounds at one time is enough for my hand, so not a fun gun! One suggestion that will save your mag release catch, because it is plastic is, don't slam your Mag in! baby it, by pushing the release as you drive it in. I've shot about 1500 rounds through it and the only problems I've had with it is Golden Saber hollow points didn't feed well. Haven't tried to many others, cause the Hornady worked, so I'm sticking with um!
Hey man great overview. You deserve alot more subs than you have. Well anyways plus one more. Hey I'm choosing between this kel tec around 250, 275$ or a Springfield xds45 that comes with a viridian sight, and 2 mags for 420$. Now I'm looking for the best edc option. Any advice to newer shooter? I have a s&w sd9 but now looking to get a edc gun
Thanks for the words my man. Best EDC is hard to tell another, but for a new shooter a gun that can be carried, Ruger Security 9, great gun around $300 new. I got into the trap of smaller is better, now I prefer a bit if a bigger gun, Smith 915 is now my carry. Both of your choices will serve, XDS is a good feeling gun, now the 45, I'm a recoil sissy. Thanks UGD
Not really a good newbie gun. It's really snappy, and hard to hold on to. Suffers from limp wristing malfunctions if you aren't 100% HOLDING TF ON! On the other hand, if you can lean to shoot this well, a full frame will be a piece of cake.
I'm also in love with the PF9 but there's one downfall- trigger stroke reset- If you shoot too fast, either a full string of 8rds or 4 double taps, you will soon experience a 'reset failure'. 1st instinct is to cycle the slide to fire the next round. Or, the mental blunder effect of a bad primer and "what the hell just happened". This shit can cost you your life in a real shoot out scenario. The gun cycles perfectly if you slow down just a little but just that alone could cost you your life. I still carry it because of it's amazing size. Factory rounds are too stout for this little jem. I've worked up my own carry rounds that don't sting as bad and make for much better handling and accuracy. My final determination- buy a Glock single stack for carry and reliability and keep this PF9 just because. Also, I call it a "throw -away". If you ever need to defend yourself and avoid legality's, you can quickly strip it down and throw all the parts in a river or lake. IMO
@@mando5224 I'm old, Bantha my man. Plus if Mrs. UGD said it's Bantha, it's Bantha. Have you seen her shoot in my videos? Beretta 92 Girl, I'm a little scared of her. UGD
@@usedgundude1035 well it's been called mythosaur since its first appearance in the much maligned holiday special and ever since. A bantha is a wooly beast of burden from tattooine that the tusken raiders ride. The mythosaur is a dragon like creature from mandalore which was wiped out by the mandalorian. The sigil of the mythosaur skull is a testament to the warrior prowess os the mandalorian people. I'm old too.
Wish I would have got a good one. Mine is a piece of junk. Fail to extract about every third round. Tried all the fluff and buff, Two extractors , new ejector . Guess I will continue to work with it. Will not sell it. Don’t want to give anyone else my problems. Have two Kel Tec 32’s and a first gen 2000. They work good but the pf-9, junk.
The early PF9 had problems, which they fixed. If you have one with a metal magazine release, and it jams you're probably limp wristing. Another thing, if you use a pistol in self defense the police will probably take it and they will probably not give it back.
Don't you know anything? Every liberal knows that the entire shell will come out of the barrel and kill only people that you care about. me.me/i/who-is-faster-than-a-speeding-bullet-nobody-end-gun-664147
@@usedgundude1035 ok, your guns. My opinion on dry firing has really changed over the last week. When my striker cracked with less than 50 Dry fires. I used to pull this trigger on a modern Striker Fired gun with no fear. Then after mine broke, I did Heavy research and found out that basically every manufacturer uses MIM Strikers/firing pins, and a lot of them are very hard and brittle due to manufacturer errors. Here is my Smith & Wesson with a broken Striker, that states in the manual it is okay to dry fire, and requires a dry fire to disassemble. czcams.com/video/4Vk_eiBJGkg/video.html I personally just changed my mind about it, and ordered snap caps in all calibers. And another thing I noticed is the firing pin / Striker is usually one of the only Parts the manufacturers don't make available to the public. So in my case, there is no Striker assembly I can purchase. Now my pistol is at Smith & Wesson until probably around the New Year due to them being backed up right now with all their warranty work. Now if you have a Glock you can get a new one pretty easily. Which is the reason my sd40 is getting sold and a Glock 23 will be replacing it. I also have a PF-9, and my gunsmith specifically told me to not dry fire this one. Said he has seen too many broken firing pins to count.
The issue with the pf9 is the firing pin is held in place by the extractor screw by resting in a notch in the firing pin. Dry firing this gun without a round or snap cap in the chamber slams the firing pin into the extractor screw which can break the screw or the firing pin. Just a weird quirk with this particular design.
@@jaredn840 agreed. It's not designed the same as most other hammer fired weapons. Not only that, but keltec says not to in the book that comes with the gun
You think this inexpensive gun is good, Check out the SCCY CPX-2, the guy who desighned tha broke away from Kel-Tec and made it right. LOOK HERE : I believe the positive things that are consistently talked about HiPoints in the positive ; BUT, Why isn't EVERYBODY talking about the SCCY CPX-2 the same way. $30-$50 more. Built with great robust. No ?'s asked parts/labor warranty, which follows the gun ,Not the owner. Easy to conceal !!!!!!!!! Long VERY Smooth, easy to stage, double action trigger w/long reset. (who cares? you won't if you have to use it.) You'll pump em' out just fine. 10+1 rounds 9mm, comes with " TWO " magazines. 2 flat & 2 pinky extension base plates. AND: Barrel Length: 3.1 in. Height: 4 in. Length: 5.7 in. Width: 1 in. Weight: 15 oz. For the money, SCCY -CPX-2 WINS BIG TIME over HiPOINTS !!! If everyone " JUST HAD TO SEE FOR THEMSELVES " about SCCY's like they do about HiPOINTS they'd be glad they spent their $$$$$$ that way, I'm SURE !!!!!!!!!!!
Cam Mason Pretty Boy Floyd carried a 1911. Son of Sam serial killer used a Charter Arms Bulldog .44 special. Markeith Lloyd murdered a pregnant woman and a cop in Orlando with a Glock. It’s not the tool, it’s the one using it.
Dude, I’m worried about the value you place on your life if your gonna Carry a PF9. Ive had mine shipped back 2x and it still jams up. Sell all your crappy guns and buy a reliable pistol. Life is a little more valuable then $175 bucks. Your mileage may very.
I buy and review whatever looks cool and used, not we've run everything from $200 Taurus to $1200 STI. I would have no problems carrying this hot rod it ran. We have a method and requirements for a gun before they go into our carry rotation. Both me and my wife prefer full size autos or revolvers. Thanks for the view UGD
If your pf9 "jams" even after youve sent it back twice, your probably not holding onto it tight enough. If your holding this thing as tight as you can and still have malfunctions, get a gun with more mass. That's the give and take with this firearm. It gives up ease of use for concealment, in more than one way. czcams.com/video/tJM1BDMjge4/video.html
When it came out, the PF9 pretty much eliminated any excuse for not being able to carry a 9mm pistol. I've had mine since 2010, and have never regretted the purchase.
I love my pf9... have had it for 7 years carry it every day!!!
about to do a m*carbo trigger job on it
Bought one in 2017 - nothing could touch it for 9mm concealability and convenience. Shot it apart and KelTec rebuilt it no questions asked. It always goes BANG and I carry it everyday. Man-boys don't like the recoil cause it messes up their manicure.
I have one, it’s not fun to shoot cause it kicks like a mule. That said over a 1000rds through it, zero problems. I don’t daily carry it, only when I’m wearing gym shorts and making a really quick run somewhere.
Great little guns. Kel Tec is a mule kickin, but she do kick when she needs to. UGD
I've had one for about 9 years. I've only put about 1000 rounds through it, because at 12 ounces unloaded, it is a bit of a beast to shoot. But I have never had a failure of any kind. I bought it for wearing nicer clothes when a larger gun would be more difficult to conceal. It is the only Kel Tec I own, and do not understand the hate it receives. I recently replaced it with the S & W Shield 2.0 as my EDC, because the recoil was more manageable. But it is still noticeably heavier than the Kel Tec. I'll never get rid of it.
Took a chance on a used one for $190. Accurate and reliable.
Great find. PF9 is an overlook pocket rocket with all the little guns that have hit the market of the past few years. UGD
bought mine for 87$ out the door at the pawn shop shot it just over 500 rounds before it jammed never cleaned it love it and mine will take another round in the clip best gun for the money
Just found one today in not to bad shape I like it
Same for me found a P32 Beat up and dirty and I just fell in love with it
I love how worn the slide looks and is.
I have one. Have had it over 10 years. Reliable, and easy to carry. Not the best trigger but I actually shoot well with it.
What I've seen, if it runs out of the factory it will run forever. I am a Kel Tec Fan, thanks for the view, UGD
Mine is a hell of a lot more reliable than my old Diamondback DB9 I paid almost 2x as much for.
It also cries out to be cleaned fluffed & buffed and lubed.
Once you take to the range, you'll figure out why it was carried a lot, and shot very little. Great carry gun, but it is not fun to shoot. Even with the pinky extension, it's tight squeeze to get all 3 of my fingers on it, and I don't have large hands. Any 9mm under 13oz is going have a lot of recoil, regardless of costs or quality.
My kel tec pf9 and p3at were bought in 08 both run flawlessly i own glocks ,cz,smith wheel guns i carry my kel tecs a lot because they are light and work i did polish the barrels and feed ramps and replaced mag releases and mag springs over the years.
MCARBO flat trigger, SS spring rod ( I replace the plastic ones on my Glocks too) and the #20 recoil spring makes it a great carry gun.
Where can you get the spring rod ?
I really like mine. Great to carry and I can hit with it pretty good. Only drawback is
it bang's the hand kind of hard. I almost never get through a 50 round box at the range.
Great little EDC. I added a grip to the handle for more bulk and an extended mag for better leverage. Makes target practice much more comfortable.
If NutNFancy carries a Kel-Tec PF-9 you know it’s good!
I never knew so many gun mfg. to copy garbage! don't know about p9 or p11 but my pat380 is still shooting great after 20 years of carrying abuse. I think you did ok on that buy.
I know this video is around 3 years old, but I just stumbled on it a few minutes ago. I wish CZcams allowed pics in comments because just last week I picked up a little PF9 that I think beats yours for it’s pitiful state. But, I fell in love with it the second I picked it up anyway. It must have been someone’s EDC/CC because it’s got holster rash and specific marring that looks like some sort of polymer slide holster. For less than $100 out the door though, I couldn’t complain!
I am hopefully going to get our finances in order eventually, and pickup the MCARBO upgrades that are available. It looks like they will bring all new life to the poorly neglected little fella. 😁
Too bad we can’t post pics. lol
It looks like it’s had one hell of a life.
Shoot pics to usedgundude@gmail.com I would love to see it. Thanks for the view, UGD
subscribed
I loved the gnarly pf-9
Wish I could find one like that! I love the look of it. I certainly understand!
Pawn shop, if they don't price them as new. Love a little age. UGD
CJ - Try Sportsmans Guide - $161 - Oct '18.
Lets see the pf9 update video. I just pulled mine out of the safe for the first time in about four years. I forgot how slim and light it is. However, I have not forgotten how unpleasant it is to shoot.
Kel-Tec PF9 and the Outstanding Sig P365 is how I roll 😎
these guns are not manufactured to liberate north Korea with , it is meant to be low Budget everyday carry pistols
It runs and runnin is why we buy them. Good budget option, thanks UGD
I just picked up one as well. I upgraded to steel guide rod and enhanced recoil springs because I have heard the recoil is a little bit unruly. I am curious what your thoughts were on that detail after you went to the range.
I've had mine for about 10 years do some basic up grades like a metal push rod and a new springs n it's all good.. how ever I did notice with the extended clip some times has a hard time cycling any 1 else?
Highly recommend MCARBO upgrades for this gun.. Dream gun.
I'll do a little research. I like the idea of the 32 soon. Thanks for the view, UGD
Looking forward to the range report
I think a Ruger EC9s is a better deal. Less money more reliable and backed by Ruger’s legendary customer service.
Love the videos keep them coming.
The EC9s is on the list. After the Security 9, all Rugers made the list. Thanks for the view, UGD
Sorry, Ruger is the Chrysler of guns.
I love my kel tec pf9 9mm but the down side is dat the maximum the clip can hold is 8 from the +1 I was looking for a extendo for it but can't seen to find one I heard about the lcp ruger 9mm clip can fit in the pf9 but I'm not sure if anyone knows a other clip that can fit in the Kel tec pf9 9mm let me know
I suggest takin a look at the factory extended magazines. One more round and the grip is SO much better.
I have several more expensive and most definitely better choices of firearms, but my favorite carry gun is my little PF-9. I've had for 8 yrs and was lucky enough to get one that works consistently. I almost always use full metal jacket ammo, as most hollow points, except Hornady Critical defense have been unreliable. The trigger pull is something to get used to, but I have. It used hurt like heck on reset, until I heated it and reshaped it. of Course I polished the feed ramp and smoothed off all sharp edges on the grip. fifty rounds at one time is enough for my hand, so not a fun gun! One suggestion that will save your mag release catch, because it is plastic is, don't slam your Mag in! baby it, by pushing the release as you drive it in. I've shot about 1500 rounds through it and the only problems I've had with it is Golden Saber hollow points didn't feed well. Haven't tried to many others, cause the Hornady worked, so I'm sticking with um!
Good info, I am a slammer, working on it everyday for sure. Thanks TNT for the view and info, UGD
@tnt Is your feed ramp aggressive, or the more gently sloped ramp. There are two styles.. Did you run yours with a light lube.?
My Kel Tec 9MM has been very reliable .
Great little guns, looking for the 32 right now. UGD
This thing snaps harder than the .40-.45 cal handguns dude.
Hey man great overview. You deserve alot more subs than you have. Well anyways plus one more. Hey I'm choosing between this kel tec around 250, 275$ or a Springfield xds45 that comes with a viridian sight, and 2 mags for 420$. Now I'm looking for the best edc option. Any advice to newer shooter? I have a s&w sd9 but now looking to get a edc gun
Thanks for the words my man. Best EDC is hard to tell another, but for a new shooter a gun that can be carried, Ruger Security 9, great gun around $300 new. I got into the trap of smaller is better, now I prefer a bit if a bigger gun, Smith 915 is now my carry. Both of your choices will serve, XDS is a good feeling gun, now the 45, I'm a recoil sissy. Thanks UGD
Not really a good newbie gun. It's really snappy, and hard to hold on to. Suffers from limp wristing malfunctions if you aren't 100% HOLDING TF ON! On the other hand, if you can lean to shoot this well, a full frame will be a piece of cake.
@@toastiesburned9929 I went with a xds9 and i am really happy with it. Thanks for the advice bud
I have one very accurate and never fails a bit snappy but when I go it goes
Kahr cm9 or ruger lc9 is nice budget guns
I'm also in love with the PF9 but there's one downfall- trigger stroke reset- If you shoot too fast, either a full string of 8rds or 4 double taps, you will soon experience a 'reset failure'. 1st instinct is to cycle the slide to fire the next round. Or, the mental blunder effect of a bad primer and "what the hell just happened". This shit can cost you your life in a real shoot out scenario. The gun cycles perfectly if you slow down just a little but just that alone could cost you your life. I still carry it because of it's amazing size. Factory rounds are too stout for this little jem. I've worked up my own carry rounds that don't sting as bad and make for much better handling and accuracy. My final determination- buy a Glock single stack for carry and reliability and keep this PF9 just because. Also, I call it a "throw -away". If you ever need to defend yourself and avoid legality's, you can quickly strip it down and throw all the parts in a river or lake. IMO
Iv had a couple girlfriends like that kel-Tec 🍻
Ex Wife here, she ran well with me and others. UGD
$175 used for a beat up PF 9 is about double what I have seen them go for at local pawn shops.
Buy it, $100 9mm don't show up in Kansas. Thanks for the view UGD
If kel tec was so bad then they wouldn't be sold out all the time. I'm a gunsmith and I carry one of these daily. If I trust it, you should too.
BANTHA SKULL, Mrs. UGD uses it for her Logo at Comic Con. Kel Tecs are what they are, cheap and unique guns. Mine was a champ. UGD
@@usedgundude1035 mythosaur skull.
@@mando5224 I'm old, Bantha my man. Plus if Mrs. UGD said it's Bantha, it's Bantha. Have you seen her shoot in my videos? Beretta 92 Girl, I'm a little scared of her. UGD
@@usedgundude1035 well it's been called mythosaur since its first appearance in the much maligned holiday special and ever since. A bantha is a wooly beast of burden from tattooine that the tusken raiders ride. The mythosaur is a dragon like creature from mandalore which was wiped out by the mandalorian. The sigil of the mythosaur skull is a testament to the warrior prowess os the mandalorian people. I'm old too.
@@usedgundude1035 but no, I haven't. I'll check it out after work.
Wish I would have got a good one. Mine is a piece of junk. Fail to extract about every third round. Tried all the fluff and buff, Two extractors , new ejector . Guess I will continue to work with it. Will not sell it. Don’t want to give anyone else my problems. Have two Kel Tec 32’s and a first gen 2000. They work good but the pf-9, junk.
Just picked one up for$175
Love this gun. Just picked it up used. Great deal!
For the money, they do run. UGD
2 problems: 1. Extremely stiff action, hard as hell to hand-cycle. 2. long trigger recycle.
He hates these cans! 😆
He surely does. UGD
The early PF9 had problems, which they fixed. If you have one with a metal magazine release, and it jams you're probably limp wristing.
Another thing, if you use a pistol in self defense the police will probably take it and they will probably not give it back.
had one in 380 flawless
Good guns, they are what they are. Thanks for the view bean, UGD
I have 3 !! Fun to shoot !! Gonna take one of them and do some upgrades !! M Carbo upgrades !
Keep me updated on the M Carbo. UGD
You can get them new now for $159 :)
Where?
@@kwolt1387 gunprime.com/product/keltec-pf-9-9mm-black-frame-7rd-pistol/
one question, if you pull the trigger, will a bullet come out and kill you?
Don't you know anything? Every liberal knows that the entire shell will come out of the barrel and kill only people that you care about. me.me/i/who-is-faster-than-a-speeding-bullet-nobody-end-gun-664147
@@sauronvile4169 You are supposed to tell lefties that the barrel goes towards there face. That is how we cull the stupid ones out of the herd lol.
Hold my beer
When I had mine everytime I shot it the mag would fall out 😂
I wouldn't dry fire that thing if I were you without a snap cap
I should, 25 years of dry firing has never broke a gun. Thanks UGD
@@usedgundude1035 ok, your guns. My opinion on dry firing has really changed over the last week. When my striker cracked with less than 50 Dry fires. I used to pull this trigger on a modern Striker Fired gun with no fear. Then after mine broke, I did Heavy research and found out that basically every manufacturer uses MIM Strikers/firing pins, and a lot of them are very hard and brittle due to manufacturer errors. Here is my Smith & Wesson with a broken Striker, that states in the manual it is okay to dry fire, and requires a dry fire to disassemble.
czcams.com/video/4Vk_eiBJGkg/video.html
I personally just changed my mind about it, and ordered snap caps in all calibers. And another thing I noticed is the firing pin / Striker is usually one of the only Parts the manufacturers don't make available to the public. So in my case, there is no Striker assembly I can purchase. Now my pistol is at Smith & Wesson until probably around the New Year due to them being backed up right now with all their warranty work. Now if you have a Glock you can get a new one pretty easily. Which is the reason my sd40 is getting sold and a Glock 23 will be replacing it. I also have a PF-9, and my gunsmith specifically told me to not dry fire this one. Said he has seen too many broken firing pins to count.
Well Joe S. That's the problem....you're dry firing striker fired guns! Everyone knows hammer fired is better.....just ask Yankee Marshal!
The issue with the pf9 is the firing pin is held in place by the extractor screw by resting in a notch in the firing pin. Dry firing this gun without a round or snap cap in the chamber slams the firing pin into the extractor screw which can break the screw or the firing pin. Just a weird quirk with this particular design.
@@jaredn840 agreed. It's not designed the same as most other hammer fired weapons. Not only that, but keltec says not to in the book that comes with the gun
"shot little, carried a lot"
Just when you think your PF9 is good to go, the assembly pin snaps. Not good.
Mag swap
You think this inexpensive gun is good, Check out the SCCY CPX-2, the guy who desighned tha broke away from Kel-Tec and made it right. LOOK HERE :
I believe the positive things that are consistently talked about HiPoints in the positive ; BUT,
Why isn't EVERYBODY talking about the SCCY CPX-2 the same way. $30-$50 more. Built with great robust. No ?'s asked parts/labor warranty, which follows the gun ,Not the owner. Easy to conceal !!!!!!!!! Long VERY Smooth, easy to stage, double action trigger w/long reset. (who cares? you won't if you have to use it.) You'll pump em' out just fine.
10+1 rounds 9mm, comes with " TWO " magazines. 2 flat & 2 pinky extension base plates.
AND:
Barrel Length: 3.1 in.
Height: 4 in.
Length: 5.7 in.
Width: 1 in.
Weight: 15 oz. For the money, SCCY -CPX-2 WINS BIG TIME over HiPOINTS !!!
If everyone " JUST HAD TO SEE FOR THEMSELVES " about SCCY's like they do about HiPOINTS they'd be glad they spent their $$$$$$ that way, I'm SURE !!!!!!!!!!!
We will run the SCCY, just waiting on the right deal. Good looking guns. UGD
SCCY is just as bad
U love it and u haven't even used it yet..wtf
George Zimmerman killed Trayvon Martin with a Kel Tec PF 9.
Trayvon tested, Zimmerman approved!
Cam Mason Pretty Boy Floyd carried a 1911. Son of Sam serial killer used a Charter Arms Bulldog .44 special. Markeith Lloyd murdered a pregnant woman and a cop in Orlando with a Glock. It’s not the tool, it’s the one using it.
stupid title
Nice video but I disagree with you completely, on your purchase! Not a Kel-tec Fan! Sorry!
Dude, I’m worried about the value you place on your life if your gonna Carry a PF9. Ive had mine shipped back 2x and it still jams up. Sell all your crappy guns and buy a reliable pistol. Life is a little more valuable then $175 bucks. Your mileage may very.
I buy and review whatever looks cool and used, not we've run everything from $200 Taurus to $1200 STI. I would have no problems carrying this hot rod it ran. We have a method and requirements for a gun before they go into our carry rotation. Both me and my wife prefer full size autos or revolvers. Thanks for the view UGD
If your pf9 "jams" even after youve sent it back twice, your probably not holding onto it tight enough. If your holding this thing as tight as you can and still have malfunctions, get a gun with more mass. That's the give and take with this firearm. It gives up ease of use for concealment, in more than one way.
czcams.com/video/tJM1BDMjge4/video.html
Shield absolutely destroys this gun. I have had two. Both unreliable, horrible trigger, ugly as hell.
I carry a kel tec pf9 for 10 year now from 2013 till now all because of my boy george zimmerman he had a kel tec pf9 save his life