USA Made Schrade Old Timer 330T Middleman Jack. This knife has very hard steel!
Vložit
- čas přidán 27. 01. 2024
- My review of the Schrade Old Timer 330T Middleman Jack pocket knife , made in America. New Old Stock Schrade Old Timer was very difficult to get a decent edge on it.
- Jak na to + styl
Check out my Case knife search here:
czcams.com/video/G0el2DqwPJs/video.htmlsi=TyoQmK_Z-sGFUcyz
Check out how I'm wetting it as I go. These are diamond immersed stones and don't soak up the water like others do.
Thanks for viewing
@@JohnKlahrI just went through the exact same thing with the same knife for a friend that had gotten it from his grand dad's passing. Once I finally was successful I told him to put it up and not use it as a daily carry. To many great knives out there that are much easier to sharpen. I said the same, this is not the same as the ones I had as a kid.
Moor Man's was a seed company. My dad was a salesman in the 50s and 60s for them. They sold all types of seeds to farmers. My dad had the middle third of Indiana. A farmer give him an order, they got a knife. That's a great find. I had one as a kid, don't know what happened to it. I'm 70 now. What a great memory you just gave me.
Glad you enjoyed
Moor Mans was a small farm feed company. I remember them from the 70's and 80's in Minnesota. Old Timers were a common give away for the Agricultural companies.
That's what I've heard, thanks for checking out my video
Their animal feed brand is still around. My local feed store, Hilmar Feed, is a local dealer. I just looked online. I do remember getting Moorman's brand brand when I was a kid on the dairy.
This story really has nothing to do with Old Timer, but is about a knife, manufacturer unknown. The last 24 years of my long career with the Postal Service I sorted flats. This was before computers, robots, and AI. After the first few weeks moving to that job I complained to maintenance that my fixed blade knife kept disappearing. I needed it to cut strings and bands off the mail. It had a 3 inch blade which was 3/4 inch wide. The maintenance man got another identical new one and chained it to my work table. It was bradded to the chain and that solved the problem. After over 2 decades of continuous use and sharpening the blade became only 1/16 inch wide like an ice pick. Over the years I received many questions and comments about my work knife. They all said they had never seen a knife so worn. As I neared the end of my career I was asked repeatedly to give up the knife by numerous coworkers upon my retirement. I replied that it belonged to the Postal Service and wasn't mine to give away. At my retirement party I kept a dry eye when saying goodbye to coworkers, some of whom were dear friends of many years, but when they presented that knife to me in a wood and glass case with the inscription "retired to it's rightful owner after 24 years of dedicated service"................well........... I am looking through tears typing this and it's been over 15 years since that day. I am looking at that knife on my wall in my study right now. I guess I can understand someone getting a little sentimental about a knife.
Thank you so much for sharing this, we would love to see a photo of this knife, if possible you could send it to my email at klahrbar@icloud.com
Either way, thanks again for sharing your experience
Great story Dennis
I still occasionally carry my grandfathers Old Timer 330T. I remember him using to scrap his pipe clean before reloading it back in 70's. Have never used or sharpened the little blade since receiving it in the early 00's, it sill had pipe tobacco buildup on it.
I have similar memories , thanks for checking out the video
My Old Timer looks like yours but is three bladed. It's over 30 years old and it went with me to survival school in the Air Force. Still have it. Best letter opener ever.
Mine is a three blade Sears model!
I was at Fairchild for AF SERE in Nov/Dec ‘00! They loaned us those fixed-blade AF survival knives to use out in the woods…I later bought one & it now lives in my truck. I did 21 years as a C-130 navigator in both AD & reserves; I retired in ‘20.
Good for you! I'm familiar with those AF knives. They also make a one handed push button pocket knife issued to flight crew. Big, bulky, pretty ugly, but useful.@@chriscon8463
340t Stockman, 30 years give or take ago one of my sons gave me a Schrade 3blade 340t Stockman, I still use it every day. It's still in nice shape, great knives.
@@chriscon8463 Thank you for your service brother.
I am 71 years old and I carried an old timer for years and years! I Graduated up to the Uncle Henry because I liked the looks better but I would say that overall that covered a period of over40 years. Overall I never had a bad knife out of any of them. They were were easy to sharpen and they held an edge really well. I had a case or two along the way but I really liked the Old Timers better. I went European once and bought a Puma and that ***would close on your fingers if you wernt't really careful. But I almost Cried when they were bought out by the Chinese. Another piece of America's Gone. I have a Chinese Old timer now. it is a good knife., But it is hard to get all sentimental about a piece of Chinese steel! I was Raised where somethings you got sentimental about and your knife was one of them.Oh my All time favorite was the large, 3 bladed Stockman, It fit my hand perfectly . The big blade for rough stuff, and the other two for the finer work.
Exactly, thanks
MOORE MANS is a livestock feed.
Hello Delbert, from another sentimental knife lover. I have Westerns, Schrades, Camillus, Hammer Brand and Keen Kutter and Pal. All Good Old American brands, sadly gone now! I own imported steel ( carried SAKs over 50 yrs.) That said, I still carry and enjoy my old friends! Most of my knives are second-hand, so at least I am not supporting a foreign company! Thanks for sharing, Blsgs, gg
Lol I forgot about those uncle henry with the fake bone wasn’t it?
@@apathyboy5306 They called it Staglon. Delrin molded to look like antler. I love real stag, but to be fair; I have never seen an Uncle Henry handle crack, shrink or break! Blsgs, friend, gg
Reminds me of having one as a kid. Thought it was the coolest thing ever! Made you feel special as a kid to have a knife in your pocket when going outside to play in the woods.
Yes it did, unfortunately I lost many of them
@@JohnKlahr Indeed!
The last Old Timer I bought 1970ish, I tried to sharpen it for two days, and it got a little sharper. My grandad took it and spent three days on it, before it got actually sharp. He said the blades were the hardest he had ever seen. It took forever, but it held that edge for years with only a light touch up, with a 1000-grit diamond stone.
Strange how they changed them
Every time I go threw my fathers tools ( he has been dead for years) the old timer my father carried brings back childhood memories ( I'm 60) .
Even my Grandmother carried a Old Timer. Used to cut up apples for us as kids
I got one of those as gift. It's been with me for over forty years! Love the little guy.
_Whaaaat a throwback to my childhood as well! I really loved the USA made Schrades, used to pick one up every few months from my local farm and home store in Ohio!_
Thanks, I hope you enjoyed my video
Awesome little knife. The 33 Old Timer with carbon steel blades was a sweet little 2 blade pocket knife. Yes is 33 OT not 330 T everybody makes that mistake 😂 You need honing oil on that stone.
30 years give or take ago one of my sons gave me a Schrade 340t Stockman, I still use it every day. It's still in nice shape, great knives.
Sweet, best hang onto it!
Thanks for checking out my video
I do a lot of whittling and have a 70's era three-bladed old-timer that's my favorite. At one point I misplaced it and thinking I had lost it I purchased a New Old stock American made carbon steel old timer and have had a similar experience with difficulty getting the blade Sharp. I put in a lot of work with a diamond Stone and finally got it serviceable. When I found my missing knife, it was in one of those skinny pen pockets in my Possible's bag and had slid all the way down in there in the pouch where I keep my Sharpie. Anyway I got my old life back and it just cut so much better and I was able to put a shaving Edge on it nothing flat. The older knife gets a kind of Blackish patina and the newer one gets more of a gray. Interesting to see your video, it confirmed my experience as well. Thanks for making it
Thanks for confirming mine as well
I bought my dad one of these years ago, and it is probably the most popular gentleman’s knife ever made. Great little knife!
Good design
Awesome video!! Old Timer, the original out of NY are my favorite. I have a few pocketknives but mostly hunting knives. I have several Old Timers, Schrade, and Uncle Henry, all the same company really. That 330T is a beautiful knife and great to see NOS still around. Thanks for sharing.
Thanks for checking out the video and commenting!
I've got my old timer that I was given on my 7th birthday(1977), an 80T. A few years later, I bought a Uncle Henry version of it and I've carried one or the other nearly every day in my pocket. Other than a Swiss Army knife, I've never felt a need to carry any of those bigger, fancier, Tacticool knives that everybody else seems to think you can live without. I have a few of those, but never really carry them unless I'm camping or something. My OT and UH or Swiss Champ have served me well for 45+ years. And, you're right about the blade. I don't know when they did it, but before they were bought out and shipped to China, they did start using a stainless steel for their OT blades. THe UH's were always a hig carbon stainless composite of some kind, but the OT were carbon steel.
Thanks for viewing and sharing your experiences,
Nice knife in need to get one of those fancy sharpeners thanks for the video.
Great video. Now I’m going to have to through my knife rolls to remember how many old timers I have.
We love to receive photos of cool knives
Thanks for checking out the video
As a kid growing up in the 60’s my dad always had Old Timer folding knives. Not sure the model but it was the 3-blade one. He had a few knives from his Army days as well, and he took care of them meticulously. Explaining that the high-carbon steel will rust with neglect but “No man lets their knife rust.” My very first knife was my Boy Scout knife. My mother didn’t think I was old enough for a knife but my father convinced her a Boy Scout is required to have a knife. “It’s time he learns.”
The Boy Scout knife was a Camillus from the 70’s with the same high-carbon steel that got razor sharp and needed care to prevent rusting. Dad had a theory that if a knife doesn’t rust, it’s not quality steel and not a real knife. A theory I’ve found to be true so many decades later with all the stainless blends and “super-steels”. They all suck compared to good old carbon steel.
Back when knives were precious and quality tools, they were cared for like kin and only passed down from father to son.
Dad taught me everything about sharpening and caring for and respecting a really good knife. “Stainless modern knives don’t need any care and don’t get sharp anyway, so they’re toys.”
My dad had a collection of very old knives but no modern ones deserved to be in that collection. He bought me a Swiss Army knife every year for my birthday. It was stainless but practical and as a kid I loved them. So much cool stuff on a Swiss Army knife! I must have had every model they made in the 70’s. But I did notice how my high carbon Boy Scout knife got spooky sharp and my Swiss Army knives just didn’t. Dad was right. Nothing beats the old carbon steel for sharpness. The trade off was it’s brittle. Everyone back then had busted the tip off their knives doing something stupid with it. And of course we’d grind the broken tip into a different shape and it was fine again. You never threw a knife away, you rolled with the punches.
Dad died in 2016 and I inherited all his knives among others things, but the knives were the most personal and special things he had.
American steel, German steel, Swedish steel, no junk steel in there. All perfectly honed, wrapped in oil cloth, not a spot of rust on any of them.
I really miss my dad. He was the best man I’ve ever known. Sorry for the long comment.
Edit: Just subscribed. I knew you’d figure out that newer “Old Timer” wasn’t anything like the steel on the real ones from way back when. Shrade started cheating on the steel in the 70’s. The good ones were American made in the 60’s. They’ve gotten much worse since then. Great video and nostalgic content. Thank you.
Thanks for taking the time to share
@@JohnKlahr , My pleasure. Thanks for making me want to write about the good old days of knives.
The model my grandpa carried looked like that but only had a single clip point blade. He gave me one when I was 12 and I would give thousands of dollars to get it back from wherever it went.
Same here, I lost several of the knives I had as a youngster
I carry a 330T in my pocket every day. I’m 45yrs old and have had countless knives. The 330T is my favorite pocket knife. It performs it’s function quite well.
Thanks for checking out my video
MoorMans was a feed company here in West Central Illinois. And mayb e beyond 😊 seems they were based around out of grain elevators and would deliver truckloads of feed to your feed bunk. So the knife shown is probably a customer appreciation gift
Reminds me of the Old timers I used growing up on the farm. Good steel IMHO. Shaving sharp with an India stone.
Thanks for taking the time to share
My grandfather gave me his Old Timer when I was a kid back in the 70's. Still have it and carry it every day. Not sure when he bought it, but had to be near the start of the company.
That should be a good one
Still have mine from the early 90s. Went to replace it in tbe early 2000's and found out they weren't American made anymore. Found a booth at a flea market selling American made Old Timers. I bought 5 different knives. It started an addiction. I now own triple digits of knives. No regrets.
That’s great! Thanks for checking out my video
All I can say is wow at your expertise
Well I am far from an expert, I’m just trying to share my experience and hobby with like minded friends
Thanks for checking out the video,
I have one I've had over 40 years. A handy little knife
Yes they are
Is your knife lubricant available for sale?
I'm doing a test batch on the lube before I decide on moving forward. Should know in the next couple of weeks
love old timers. The 8OT is my personal perfect knife. cool vid.
Thanks for checking out my video! I Have a 80TB that I'm waiting on delivery. Should do video this weekend.
My favorite was the 150T
I used it for years. One day while opening a coke it closed on my hand. Switched to a lock blade and never looked back. I always kept my knife razor sharp.
Thanks for viewing
I carried a three blade one for years, I can't remember how many times it got checked at the airport with no problems, those were the good ol'days. Also used to give them as gifts back in the day when they were made in the USA and before the hi-tech craze really kicked in, if I remember well they did cost about ten bucks at big box stores in the mid 90's.
Thanks for checking out the video, I used to give as Christmas gifts as well
My dad had the same knife when i was a kid. I always thought it was funny my old dads knife said old timmer. He passed when i was 14. I have nothing of his. I found an oldtimer knife just like his at a flea market years ago and carry it everyday.
Great vid! Brought back good memories! Younger me was partial to the 93OT ‘wrangler’ which was slightly bigger than the middleman and had a sheepsfoot secondary. Great knives. My grandfather had the Queen #2 which I think was a similar pattern to the 33OT
Thanks for checking out the video
About six years ago I went down the pocket knife rabbit hole. I had Victorinox and other pocket folding knives since I was 10. Then I picked up a Camilus Stockman and a Spyderco Delica (original molded clip) at a garage sale for $3 each. So I wanted to learn more about knives and knife steels. Now I must have 50 knives, including fixed blades, most of them under $100. The Stockman is the most versatile pattern of traditional knives. However, I carry a Victorinox Huntsman everyday.
I bought a Buck gift set of liner lock knives several years ago from Walmart. They resembled a Benchmade 940 with red handle scales. Unbelievably sharp, like a razor.
I carry a Victorinox Tinker daily. Thanks for viewing and taking the time to comment
John, I carried a Tinker for over 20 yrs? HATED when I lost it!! The older design with the cool Phillips/nail file! Could not afford to replace at the time, but still carry used Vicky's to this day!!
The 33ot is my go-to for whittling. I've made a lot of money with it over the years selling my carvings . Knives didn't come sharpened back in the day. You had to do that or learn how. What would a lot of people today do if they still had to sharpen their own knives. They probably have to get their girlfriend to do it like they do when they need to put on a spare tire. Shameful! GOOD VIDEO. Thank you.
Thanks for checking out the video, would love to see your carvings.
Good video! I had an old muskrat from old timer as a kid. Still looking to replace it. Thanks for sharing!
I had one of the older ones as a teenager and would even use it to shave as I grew into a young man. Recently bought a new one now that I am my 70's and I can't even get it sharp. What a shame that the quality has deteriorated to this point. I will keep working on it, but what a pathetic wow! Thanks for the video as it gave me some hope that I may still get an edge on it.
Thanks for checking out my video
I've had my Old Timer at least 40 years. 3 blades, longest is 2 1/8 inch. It tough as nails, no wobble in blades, excellent knife.
Old ones were the best. All of mine got gone years ago. Thanks for checking out my video
I have had a usa made sharp finger for a few decades now and it is I fantastic little knife. I have just about used the blade up from using, sharpening, and reprofiling it a couple of times over the years.
They are great little knives
Hey John, Glad to see someone else who enjoys Old Schrades! I have the stockman with the Turkish clip and Staglon handle like the one at the upper left. Uncle Henry actually! It has a famous dept. Store name etch also! Not at hand, forgot name!
Thanks for sharing your sharpening tools and techniques, Blsgs, gg
Thanks for checking out my video
Greetings , I carried a 194OT LINER LOCK for about the first half of my 35 years as an elevator tech.. first 5 years working construction ( along with a 5 inch camillus lock blade) .
Then younger brother gave me a Spyderco … that Spyderco was the favorite and I still carry one everyday in retirement …
Because of muscle memory that Spyderco came out in my hand ( miracle like) when I was jumped in downtown Atlanta ( in my work clothes no less).
Guy did a 90 degree turn ( ran up to me with a pipe in his hand).
I never pulled a knife out in self defense before. Was a year before retirement… any time I give a knife as a gift I try to give a delica or enduro … and tell folks to use it everyday … THAT. May save ur butt.
I guess similar to range practice or any other self defense -practice…
Great book that my swat officer ‘child’ gave me- the ‘gift of fear’ . Found out it was on the top of most self defense guru’s list. It’s an almost a spiritual book of ‘awareness’… look it up.
I definitely will, thanks for the tip
I've carried various pocket knives over the years. Including the Old Timer. It's in a box packed away somewhere. Knives are tools, very handy, and I've used mine a lot.
I don’t leave home very often with out one. Thanks for checking out the video
when I was a kid growing up in Salmon Idaho, me and my buddy ran a trap line for mainly muskrats. I had a few skinning knives but my favorite was the Schrade Walden "improved muskrat" because the steel hardness was just right (on the soft side) and allowed you to quickly freshen up the edge to razor sharp with a few strokes:)
That is what was so great about them, now everyone wants hardest blade possible
USA-made high carbon steel knives are the ones that were so easy to sharpen to a near-razor edge. These hard stainless steel knives are not my favorites, though they do have a place in my tool boxes, tool bags, and tackle boxes. They are great for throwing into your car or truck and not worrying about them for awhile. But for everyday, in-my-pants-pocket carry, the high carbon steel knives can't be beat.
@@quintbush6999 stay tuned, I have another “new old stock” knife on the way. A Schrade. Hopefully the steel will be better.
I've got the 340T three blade version, had it for more years than I can remember (at least 30yrs.)... I still use it everyday. I can get mine 'hair popping' sharp with little to no effort, I own many other knives but this one always seems to find it's way into my pocket....
I like the 3 bladed ones better
I have the Sears version.
I have every size and have been carrying them for 40+ years .. suits my needs perfectly.
I remember growing up and the best knives to be had were at the local True Value hardware. I used to drool over all the Old Timers and Case knives, but when I got old enough to afford them I was sadly disappointed. It seemed that I had something in my skin that caused terrible corrosion! I finally found the Uncle Henry brand and that was the ticket! It didn’t matter what I did to the knife it never rusted and looked brand new! To my notion it took and retained a better edge than the others too. Besides back then they had a lost guarantee and who can beat that! I can’t really speak to any of them today because I pretty well switched to all Leathermans and don’t know how quality is now. I see Ebay has an awful lot of the older ones though for sale in like new condition.
Thanks for adding your part of the story and for checking out the video
Wow that's a blast from the past. My father bought me that very knife from a little hardware store in Main for my birthday when I was a kid. Back then every boy had a pocket knife.
Thanks for checking out my video
I too got my first pocket knife at eight. I've carried one ever since. Imagine doing that today. Giving a boy a pocket knife.
so did lots of us girls.
I bought an old timer a year or so back , thinking it was the same knife I had as a kid ,and as young man , I wore out several on the job , I used em pretty hard back in those days , they were wonderful knives took an edge like a razor !
Boy was I in for a surprise ! The new Chinese old timer was awful ! I threw it away it was so bad …
Things just ain’t what they once were…
No they are not, but they are offering USA made ones again.
@@JohnKlahr
I may try one if it’s USA made , and decent steel that last one left a bad taste in my mouth though , the only way I could open that one was with a pair of channel locks , and it was a struggle with then. I wound up using valve grinding compound on it , even then it was a struggle to open it . One useless POS .
Look around in antique stores. You can usually find old American made Old Timers for cheap.
My favorite little knife was an old timer, a gift from one of my kids, 3 blade but smaller than the 3 blade you laid out. That along with a 3x electricians knife, served me well for 20 pluse years . Then i got a call while on the bench, hurried to call left little knife, oops that darn knife walked off.
They do tend to walk off when your not looking.
Thank you for a great review
Thanks for checking it out
That reminds me of the Imperial pocket knives I had when I was a kid... They were nearly impossible to sharpen. They didn't usually outright rust, but they weren't stainless either. I likely still have my yellow handled fishing knife somewhere in my tackle box. One I got my Case XX pocket knife I never looked back. Easy to put a razor edge on and it kept it... Still in my desk drawer and still sharp. Last time I sharpened it was back in the 1970's... not that I use it much other than cleaning under my nails opening an envelope and such.
Thanks for checking out my video
You may have needed a better instruction on sharpening. The knives you speak of and their carbon steel blades were the easiest to sharpen
@@flyrog07 My dad was a toolmaker. I had a soft stone a carborundum and a hard Arkansas. Yes Imperials would sharpen, but just never take a keen edge like my Case or my PAL would. I could literally shave with my Case XX, if I could have grown a beard at that age.
The imperials were some sort of carbon steel. The would hold their dullish edge for quite a while and they got a patina quickly, but they never really rusted and pitted like the Case or WW2 PAL knives did. They never got red rust.
I actually recall an old carpenter back in the 1960's remarking that "new" knives never get dull, because they never get sharp. That said, back then, most of the knives we had as kids, were cheap and we didn't expect much.
But as you brought it up, If I come across one of my old Imperial knives I'll toss them on my wachita and see what happens.
My family used to own a country general store back in the day.We sold the old timer knives.We had a large knife case.Sold quite a few over he years.
I’ve got this one, not in as nice condition as your NOS, but still has full blades but with some patina. The 1095 carbon steel shrade used on its old timers was great steel. I also own the stainless steel version made by shrade under the uncle Henry line, also made in the USA. Literally the same frame and blade, just stainless steel as shown on the tang as shrade +. I prefer putting these 3.25- 3.5 inch handled slipjoints, in my fifth pocket of my jeans. Cool video man. Those modern spydercos are def nicely made knives, nice high flat grinds on the blades, but to me, it’s all about the traditional patterns. I carry both, but just find myself wanting the slipjoints more for edc, modern folders for more hard use tasks.
Thanks for checking out the video and sharing some info.
1:41 My Grandfather and Dad both carried Old Timer's there whole life's. I still have one that my Dad carried in the 60's.
They were an American Icon, shame they went out of business
I've got a 3 blade. I think it is a 375 that I have carried for probably 25-30 years, and also a lockblade with a leather case to carry on my belt that I bought in the early 80's and carry hunting. Two of the best knives I have.
Best hold on to them, thanks for checking out my video
I have the same lil knife -came in a set when I got with a 5 inch old timer same handle..use the lil one frequently still, great knife👍
How long you had them?
The Old Timer is a great knife like any Schrade. I grew up with Western, Camillus and Schrade knives. I never cared for the stag on Uncle Henry or the sawcut Delrin on Old Timers. All 3 are the same build and blade steel and I collect the jigged bone Schrades. (New subscriber)
All the ones I had as a kid were in the Delrin handles, so I favor those
Thanks for checking out the video
Moorman Feeds were located in Quincy Illinois, bought out by Archer Daniels Midand (ADM) several years ago
Thanks for the info
I have a couple of old well used 33OTs. One was a well used flea market find that my nephew gave me, one of those old ones where the blades have been sharpened A LOT and one is an ebay find that was obviously used but still in great shape. Great knives and I carry both of them occasionally but in my experience all the USA made Old Timers had hard steel that was difficult to sharpen. My newest on is a Mighty Mite that I bought back in the late 1980s.
My memories were ( and they are getting less clear) that the cade knives were hard to sharpen but the schrades and old timers were gravy to sharpen on the soft Arkansas stone
@@JohnKlahrthat is also my recollection. Buck knives were hard to sharpen back in the 80s, but Schrades were really easy to edge.
My dad carried an Old Timer, unfortunately we lost him back in the 90s. I just got a 34 OT off Ebay I'm gonna clean up. BTW, yours is a 33 OT. The O is a letter not a number.
Yes , thanks for the reminder. Don't know where my head was
That is unusual that it was so hard to sharpen. I have a single blade Old Timer U.S.A-made that I got for about $10 from Wal Mart and I know it’s carbon steel because the blade has had the patina on it for several years now, and it sharpens really quick.
From the responses to my video, it appears that they did have some bad ones about the time these were made.
It makes me wonder if these were part of a recall and that is why someone is still selling brand new in the box 35 year old knives
I'm a Schrade USA kind of guy. Bought my first back in the late 70s I believe? It is an LB7 Bearpaw from when they had serial numbers. Mine is #7100. I started looking into Schrade a bit more and now have a small collection of Schrade USA knives.
Yeah, I have Benchmade and Spyderco as well. 😁
That is great, you should enter it in the knife photo contest
Barlow was the holy grail when I was a kid in the 60s. Had an Old Timer as well. Somewhere I've got a box of pocket knives. As an adult I carried a buck 110FG (a gift) for the longest time (until I had a motorcycle accident and fell on the belt case. Really screwed up my hip for a while) Carrying a Kershaw Shuffle these days. Free knives are often the best knives....
Can’t beat free, thanks for viewing
It's not a 330 T knife. It's a 33 OT (33 old timer) OT stands for the old timer series vs, the Uncle Henry, Just a little information to pass along.
You mentioned oil residue taste and cleaning the blade, and it made me remember that you didnt grow up properly if that slice of apple off your dad's knife didn't have a hint of 3 in 1 seasoning and leave a blue streak on the slice.
3 in 1 is mostly mineral oil and is not as bad as some of the modern stuff out there today. Thanks for viewing!
I love the Old Timer brand. Most useful pocket knives. For me carrying a $200 plus pocket knife for actual work is silly.
Best pin knife I've ever owned. Still carry it and still keeps one hell of an edge.
Thanks for viewing and taking the time to share
Thanks this was a great video
Glad you enjoyed
The middleman was the first knife I carried. I actual found it in a creek. It eventually wore a hole in my pocket and I lost it 😂
Done that as well,
Thanks for checking out the video
I have a 8OTW. Says Old Timer on the brass inlay shield on the iron wood handle scales. Says Schrade on the tang of the main clip blade. Has a coping/sheepsfoot & a pen/spey blades. Brass liners & bolsters. Steel back springs. It's my most go to use slip joints. I've had it for probably 15 years.
I got one on the way
I love these knifes, I've got the set sheath and pocket. Bought back in the 80's, don't know if they have changed metal, mine have held up really well.
Sounds like they did toward the end of the USA made knives
Love old-timer for whittling!!
Grew up with an old timer in my pocket
I got out my 340T (3 blade) I carried in the 1960s. A few swipes on a medium grit Arkansas stone and it sliced paper easily.
That is how they are supposed to be. .
Ellenville, NY is in the Catskill Mountains, Southwest of Woodstock, and Kingston. Shrade closed it's doors in 2006 after a workers stroke, and the company sold the name and rights to Acme United Corp., an international conglomerate with facilities in the United States, Canada, Germany, Hong Kong and China. The Old Timers are still decent, low-cost knives, but they are not the same as the ones made here in Upstate NY
I agree, thanks for viewing
Moorman’s is a high quality livestock feed company ! They make the best “Calf Manna”. I’ve been feeding it for 57yrs; and I have one of those knives that’s just as old.
Wow, that is cool
I've had my Schrade 340T for about 35 years. It's got carbon steel blades and I love it. Takes about 10 minutes to sharpen it.
What do you sharpen it on?
@@JohnKlahr I've got several grades of whetstones, and a Lansky kit. Depending on my mood, I'll use any or all of them. The Lansky kit works pretty well, and along with a light oil, it's about a 5 to 10 minute job, depending on how long and what I've been doing with the knife. The Scrade isn't my EDC any longer, but I keep it for sentimental value. It rests comfortably on my desk to open packages and letters.
@@lindeleasley I have a couple that don't leave my desk as well
Currently, 580T 3-blade Owd Tymar is my pokket knif. In storege shed is many boxis O.T. from 50's/60's/70'/80's/90's/2k & up. Thinking about having them displayed in candy dishes/ each mourner take his pik, @my funeral. That way people be glad to see me go/I'll be remembered long time!
Good idea
I have some of the old made in USA oldtimer knives and they are awesome cutting tools. Every one of the new old timers I’ve bought that are made in china, the springs would always break. To me I Cavour a buck knife myself. Buck knives are very high quality and will absolute hold an edge. Tks
Yes, My appreciation for Buck knives has grown over the last year
My best made in USA schrade Old Timer slip joint was the Blazer with a patented serration sheep foot blade, clip point and spey blade.
I'll have to check that one out. Thanks for checking out my video
What was the "center swab jack" knife? The one with the green scales.
Center swell jack is blueish green
I had the same issue with a Buck 110 my kids gave me for Christmas in the early 80's. That damn blade was impossible to sharpen with a regular sharpening stone. I've had several 110's since and not had that same issue. I don't know if it was the particular steel they used at that time, the hardening process or both but it wa a nightmare. I had a friend try sharpening it finally and he said he resorted to using a file on it because it was so hard. I wish now that I had never tried having it sharpened. I wish I had just put the knife away. I still have it but, after the file treatment, it doesn't look as nice now.
I bought a Caseb a XX a few months ago. It is about 4” long, collapsed, with three blades. It is made in PA, USA. I think it is a model 106 or 160. It is similar to knives that I toted as a boy. It is stainless steel with bone handles.
Sounds like a large Stockman, just got one recently, nice knife.
Thanks for checking out my video
Moormans was a cattle feed company i think . Nice knife , i have one too without the Moormans stamp .
Thanks for the info, thanks for viewing!
I've been carrying the next sized smaller 3 blade model every day since 1991.
Typically I'll have a larger pocket clip knife too, usually a CRTK M16 with a tanto point, but l ALWAYS have the Old Timer in the bottom of the pocket.
I like the 3 blade version better
I carry a Shrade Old Timer. I was born in 1947. My dad, who was born in 1924 carried a Schrade as well. We pronounced shraadee or shradey, not shraad, as you do on the video (without the ee sound on the end. We lived on a cattle ranch.
Thanks for checking out the video
Have an Old Timer the blade is marked Schrade +,USA, 30 T ,any idea what the 30T means and type of blade steel would be helpful. Thanks
Model 3 old timer, but unfortunately the blade steel could be anything as I found out here
Does it have any rust or patina on the blade?
Is it possible ro sharpen the smaller pen blade on the Hapstone?
Yes, Same way
Same for me. New old stock, had to put my own edge on with diamond plates lol I got frustrated with my ceramics.
Seems like I have to use diamond stones more and more often these days
They were good knives made for the working man ,factory workers, farmers and construction workers who sharpened them on whet rocks and 3 and 1 oil .They didn’t have fancy sharpeners and didn’t need one but could keep a razor edge . Stick the blade in a potato tonight if it’s black in the morning it’s carbon steel if not it’s stainless. I never preferred Buck because the stainless was hard for me to get an edge .
Yes they were. That's why I was so surprised how hard it was to get an edge on this one
I think high carbon takes an edge easier, but wears quickly.
@@peterpuleo2904 his old timer may have not been tempered correctly, I’ve tempered 1095 at 62 on the Rockwell , but many old knives were anywhere from 55 to57 and were easily sharpened but did lose edge fairly quickly.I have a schatt and Morgan with 440 A ,supposedly at 59 Rockwell and it sharpens easily and holds an edge well . But I never for the likes of me could sharpen a Buck.Now that I have a belt sander I sharpen most steels with 400 grit ceramic combat abrasive belts even at 65 on the Rockwell .
@@randyblackburn9765 Thanks for the reply. What Rockwell do you get on some of the newer "super" or "powdered" steels?
@@peterpuleo2904 not done any super steels but I have made knives out of molybdenum steel power hacksaw blades grind and drilled them cold and they are 65 on the Rockwell scale, but that high speed edge will take a razor edge and not chip off
I’m an old guy, wore out 2 Old Timers. Still have my Uncle Henry LB7 USA but lost the scabbard & had to make one.
I bought the 3 blade 80T one about the same date as yours been in my work locker since 1987 use it regularly.USA stamp on the blade
Is it hard to sharpen?
Just came over to watch this from your 2500 sub video. I had a US made 12OT “Pal” and it was an exceptional knife (better than any Case Sodbuster Jr quality I’ve had-I’m 4/4 of drawing bad Case SB Jr knives so I pretty much gave up on the brand☹️). I’ve never seen someone sharpen a small slipjoint in a guided system. What approximate angle do you use on them? Thanks for the video (yeah this one went super viral for a knife video).
Usually about 20*, sometimes more if it’s really small to clear the clamps but I’ve learned a few new tricks since making this video. And yes, I still have this knife
My dad and uncle worked for MoorMans, the sold great livestock feed
That is cool, never heard of them until I got this knife
How can i find which one i have i found one with a great blue patina i THINK it says shrade on the stamp but can read as it's too small
If you have a nice patina you most likely have a good one
@@JohnKlahr yes bro I just ended up sharpening it and cleaned the brass ending of it . The steak has very minimum pitting but you can barely see it but the steel has a beautiful blue tinge. Wish I could show u
Made and Printed in the U.S.A.
That means the box, not the knife.
In July 2004, the year the company celebrated its 100th anniversary, the factory in Ellenville was closed. The Schrade name was purchased by Taylor Brands LLC, who continue to manufacture products under the Schrade brand as well as Old Timer, Uncle Henry, Imperial & Smith & Wesson knives. Production is now in China.
Sad but true
"Delron" is the name of someone in a mugshot.
"Delrin® is the engineering thermoplastic industry leaders prefer for high-load mechanical applications. Delrin®, the stiffest unreinforced engineering polymer available, is the preferred choice by designers, extruders, molders and brand owner, as it allows potential cost and environmental savings."
It's pretty neat stuff.
Yes but Delron rymes better
Just found you. Great video
Thanks, welcome to our knife community,
The ones we had as kids were really good knives for the price. They messed up the " secret formula " somewhere along the way and everything went downhill
It's not 330 T. It's 33 OT. For Old Timer. The stamping on the blade looks like 83 OT.
Thanks
Moor Man's was a feed company back in the 70s n 80s here in Alabama
That is what I heard , thanks for checking out my video