very cool, I've got one for legit use and they are good, have messed around with smaller ones that do 4mph and the motors are not great, but as you said the motors on these ones seem excellent and they are not used to full potential in the normal use of the vehicle. If I could do the metalworking like you done I would like to make it lower like you did and make it go a bit faster, or take the engine out of it and put it into a smaller one.
I HAVE GOT A FRIEND THAT WANTS TO MAKE A SMALL BUGGY LIKE MY YELLOW ONE SO I AM HOPING TO TO A VIDEO ON HOW TO BUILD ONE FROM A SHOPRIDER SOVEREIGN. ALL THE BEST PETE.
NO I DON'T BECAUSE I DO NOT KNOW HOW TO. THE ONLY WAY THAT I HAVE SPEEDED THEM UP A BIT IS TO PUT BIGGER WHEELS ON THE REAR. THE CAR THAT I AM JUST FINISHING IS GOING FASTER BECAUSE I HAVE CHANGED THE SPEED BUY USING MOTORCYCLE SPROCKETS. ITS A SHAME THAT I DON'T KNOW HOW TO BUT THEY ARE SAFER FOR THE CHILDREN AT 8MPH MAX. ALL THE BEST PETE.
Hi i have a cordoba and wish to turn it in to the mr beans mini but have health problems and can not lift but would like some help can you help me plz how much would it cost for you to turn my cordoba in to the mr beans mini
HI MATTHEW. I AM MUCH TO FAR AWAY FROM YOU AS I AM IN DEAL, KENT, ENGLAND. IF I WERE NEARER TO YOU THEN IT WOULD BE DIFFERENT. TO MAKE A MINI BODY OR COPY ANY KIND OF CAR MODEL BODY YOU WOULD REALLY NEED TO MAKE A FIBREGLASS MOULD AND MAKE THE BODY OUT OF THAT. EVEN THOUGH I WAS A FIBREGLASS LAMINATER FOR 2 AND A HALF YEARS IT WOULD BE A LOT OF AGRO MAKING THE MOULD. I AM USING THE SINKS AND PLYWOOD AS IT IS EASIER. MY HOUSE NEEDS REDECORATING SO I AM REALLY TO BUSY. SURELY THERE MUST BE SOME WELDERS AND CARPENTERS NEAR YOU THAT CAN HELP YOU. KIND REGARDS PETER.
YES. IF YOU TOOK THE PLASTIC FRONT AND BACK OFF OF A SHOPRIDER CORDOBA AND THEN WELDED THE CHASSIS LONGER BY SLEEVING AND WELDING SAY 20" INCH PIECE OF METAL IN. THEN MAKE ANOTHER BRACKET UP FOR THE MIDDLE TO PUT ANOTHER SEAT IN THE MIDDLE TO DRIVE IT. A SHOPRIDER CORDOBA IS DESIGNED TO CARRY 35 STONE. I AM IN DEAL, KENT. ARE YOU MILES AWAY FROM ME. ALL THE BEST PETER.
@@p..chittenden9174 Thanks Peter, I don't have a welder and my scooter is a TGA S4 Breeze. I think that there could be a way to have the seats back to back if the weight can be distributed evenly. Welding a new seat frame to the overhead cover frame.
SORRY BUT I DONT UNDERSTAND QUITE WHAT YOU MEAN BY COMMISIONS. I AM JUST MESSING AROUND MAKING THESE CARS. EVEN THOUGH I WOULD BE WILLING TO SELL SOME OF THESE CARS PEOPLE DON'T QUITE REALIZE HOW MUCH WORK IT IS MAKING ONE OF THEM. ALL THE BEST PETER.
I HAVE GOT A VERY GOOD FRIEND WHO KEEPS COMING UP WITH THESE CORDOBA SCOOTERS CHEAP WITH A FAULT. AND I END UP MAKING ANOTHER CAR AS NEW IDEAS KEEP COMING TO ME. I LIVE IN DEAL, KENT.
HI THERE. I WOULD LOOKING A DIFFERENT PRICE FOR EACH ONE REALLY AS SOME OF THE MOBILITY SHOPRIDER SCOOTERS I PAID £600 FOR AND THEN TIME YOU BUY ALL THE WOOD AND ALL THE BITS YOU HAVE SPENT £1000. THEN IT TAKES 2 TO 3 MONTHS TO MAKE ONE. SO REALLY I WOULD LOOKING AT ABOUT £3000. BUT SAYING THAT I WOULD PROBABLY BE GETTING MAYBE £5 AN HOUR AS I WORK FROM MORNING UNTIL LATE AT NIGHT EVERY DAY. I AM A WORKAHOLIC. I HAVE GOT 7 GRANDCHILDREN AND I WILL PROBABLY GIVE THEM THE CARS LATER. ALL THE BEST PETER.
SORRY I DON'T BUT ITS A SHAME BECAUSE I SAW 2 OR 3 OF THEM BEING THROWN OUT AT THE REAR OF A MOBILITY SCOOTER WORKSHOP. YOUR BEST BET IS TO LOOK AROUND AND GET IN TOUCH WITH PLACES LIKE THAT. OR AT A BOOT FAIR. ALL THE BEST PETE.
YES SORRY THAT THE VIDEOS ARE NOT PERFECT BUT MOST OF THE WORK ON THEM IS HOWEVER YOU WANT IT. THERE ARE NO GOLDEN RULES. I HOPE THAT THE NEXT VIDEO I AM DOING ON MAKING THE BODY IS BETTER THAN THE PREVIOUS ONES. KIND REGARDS PETER.
Great video cars all look brilliant well done.
Great work Pete. Can't wait to see the finished Scooter-car.
This is amazing mate! Thanks for sharing all your work, its brilliant!
This is the go.. improvise 👍...add a alternator and two motors
Hi Peter I've just found your channel and think your work is outstanding . Well done and thank you
Smart Dude !
very cool, I've got one for legit use and they are good, have messed around with smaller ones that do 4mph and the motors are not great, but as you said the motors on these ones seem excellent and they are not used to full potential in the normal use of the vehicle. If I could do the metalworking like you done I would like to make it lower like you did and make it go a bit faster, or take the engine out of it and put it into a smaller one.
Ever tried doing a 4wheel drive model?, using two scooters welded together.
Wow what a great video really interesting, thanks for your video Peter
I HAVE GOT A FRIEND THAT WANTS TO MAKE A SMALL BUGGY LIKE MY YELLOW ONE SO I AM HOPING TO TO A VIDEO ON HOW TO BUILD ONE FROM A SHOPRIDER SOVEREIGN. ALL THE BEST PETE.
DO
Thank you Peter
Nice work Peter! Where can we see the entirety of your work? Thanks
I LIVE IN DEAL .KENT. I AM IN MY WORKSHOP MOST OF THE TIME. CT14 6DY
@@p..chittenden9174 what kind or watts of motor used in yellow limo?
@@p..chittenden9174 what voltage or watts motor you used in two seater?
Strengthen ya frame
Put a bash guard on it
Do you do any kind of modification to the controllers to speed them up
NO I DON'T BECAUSE I DO NOT KNOW HOW TO. THE ONLY WAY THAT I HAVE SPEEDED THEM UP A BIT IS TO PUT BIGGER WHEELS ON THE REAR. THE CAR THAT I AM JUST FINISHING IS GOING FASTER BECAUSE I HAVE CHANGED THE SPEED BUY USING MOTORCYCLE SPROCKETS. ITS A SHAME THAT I DON'T KNOW HOW TO BUT THEY ARE SAFER FOR THE CHILDREN AT 8MPH MAX. ALL THE BEST PETE.
Hi i have a cordoba and wish to turn it in to the mr beans mini but have health problems and can not lift but would like some help can you help me plz how much would it cost for you to turn my cordoba in to the mr beans mini
HI MATTHEW. I AM MUCH TO FAR AWAY FROM YOU AS I AM IN DEAL, KENT, ENGLAND. IF I WERE NEARER TO YOU THEN IT WOULD BE DIFFERENT. TO MAKE A MINI BODY OR COPY ANY KIND OF CAR MODEL BODY YOU WOULD REALLY NEED TO MAKE A FIBREGLASS MOULD AND MAKE THE BODY OUT OF THAT. EVEN THOUGH I WAS A FIBREGLASS LAMINATER FOR 2 AND A HALF YEARS IT WOULD BE A LOT OF AGRO MAKING THE MOULD. I AM USING THE SINKS AND PLYWOOD AS IT IS EASIER. MY HOUSE NEEDS REDECORATING SO I AM REALLY TO BUSY. SURELY THERE MUST BE SOME WELDERS AND CARPENTERS NEAR YOU THAT CAN HELP YOU. KIND REGARDS PETER.
convert a single seat mobility scooter into a two seater any thoughts ideas please
YES. IF YOU TOOK THE PLASTIC FRONT AND BACK OFF OF A SHOPRIDER CORDOBA AND THEN WELDED THE CHASSIS LONGER BY SLEEVING AND WELDING SAY 20" INCH PIECE OF METAL IN. THEN MAKE ANOTHER BRACKET UP FOR THE MIDDLE TO PUT ANOTHER SEAT IN THE MIDDLE TO DRIVE IT. A SHOPRIDER CORDOBA IS DESIGNED TO CARRY 35 STONE. I AM IN DEAL, KENT. ARE YOU MILES AWAY FROM ME. ALL THE BEST PETER.
@@p..chittenden9174 Thanks Peter, I don't have a welder and my scooter is a TGA S4 Breeze. I think that there could be a way to have the seats back to back if the weight can be distributed evenly. Welding a new seat frame to the overhead cover frame.
Hi mate are you in the uk?
YES I LIVE IN DEAL,KENT.
Do you do commissions at all
SORRY BUT I DONT UNDERSTAND QUITE WHAT YOU MEAN BY COMMISIONS. I AM JUST MESSING AROUND MAKING THESE CARS. EVEN THOUGH I WOULD BE WILLING TO SELL SOME OF THESE CARS PEOPLE DON'T QUITE REALIZE HOW MUCH WORK IT IS MAKING ONE OF THEM. ALL THE BEST PETER.
I HAVE GOT A VERY GOOD FRIEND WHO KEEPS COMING UP WITH THESE CORDOBA SCOOTERS CHEAP WITH A FAULT. AND I END UP MAKING ANOTHER CAR AS NEW IDEAS KEEP COMING TO ME. I LIVE IN DEAL, KENT.
HI THERE. I WOULD LOOKING A DIFFERENT PRICE FOR EACH ONE REALLY AS SOME OF THE MOBILITY SHOPRIDER SCOOTERS I PAID £600 FOR AND THEN TIME YOU BUY ALL THE WOOD AND ALL THE BITS YOU HAVE SPENT £1000. THEN IT TAKES 2 TO 3 MONTHS TO MAKE ONE. SO REALLY I WOULD LOOKING AT ABOUT £3000. BUT SAYING THAT I WOULD PROBABLY BE GETTING MAYBE £5 AN HOUR AS I WORK FROM MORNING UNTIL LATE AT NIGHT EVERY DAY. I AM A WORKAHOLIC. I HAVE GOT 7 GRANDCHILDREN AND I WILL PROBABLY GIVE THEM THE CARS LATER. ALL THE BEST PETER.
DO U HAVE ANY OLD PIECES I NEED A WHEEL CHAIR BADDD😢😢😢😢😢😢
SORRY I DON'T BUT ITS A SHAME BECAUSE I SAW 2 OR 3 OF THEM BEING THROWN OUT AT THE REAR OF A MOBILITY SCOOTER WORKSHOP. YOUR BEST BET IS TO LOOK AROUND AND GET IN TOUCH WITH PLACES LIKE THAT. OR AT A BOOT FAIR. ALL THE BEST PETE.
I KEEP SEEING WHEELCHAIRS BEING THROWN AWAY. ITS EASY TO GET HOLD OF ONE OF THEM.KIND REGARDS PETER.
Hi Peter I wanted know could modify my ew -36 I would like to pay you to do so if possible
HI THERE. WHAT IS A EW 36 ASVI DONT KNOW WHAT IT IS.
I DO NEED TO STOP FIDDLING ABOUT WITH THESE CARS AND THINGS REALLY AS MY HOUSE NEEDS A LOT OF JOBS DOING ON IT AND IT NEEDS PAINTING AS WELL.
I HAVE COMPLETELY NEGLECTED IT BECAUSE THE GRANDCHILDREN TURNED UP. ALSO WHERE ABOUTS ARE YOU.
@@p..chittenden9174 ok I live in east hollywood
HI THERE. I AM MILES AWAY. I AM IN KENT, ENGLAND.
"...needs to be cut just 'ere and welded 'ere..." or "...cut like this...", all out of shot on the video so nobody can see what you are referring to!
YES SORRY THAT THE VIDEOS ARE NOT PERFECT BUT MOST OF THE WORK ON THEM IS HOWEVER YOU WANT IT. THERE ARE NO GOLDEN RULES. I HOPE THAT THE NEXT VIDEO I AM DOING ON MAKING THE BODY IS BETTER THAN THE PREVIOUS ONES. KIND REGARDS PETER.