Polaris 570 SPORTSMAN DIY coolant fill and burp HOW TO diy atv maintenance Polaris sportsman 570 sp
Vložit
- čas přidán 26. 05. 2019
- In this video I will give you a step by step process of how to fill and burp the cooling system in your Polaris 570 SPORTSMAN. After I searched for DIY information to service my own Polaris sportsman 570 sp coolant system and coming up with nothing I decided I would make a video to help others that were in my same situation. I hope this helps youon your Polaris Sportsman 570, let me know if there is anything else you would like me to figure out! Thanks for watching and don't forget to hit that subscribe button!
#polaris
#sportsman570
#atvcoolant
#diyatvcoolant
#polarismaintenance
#polaris570sp
#polarissportsman570sp
#diymechanic
#backyardmechanic
#coolant
#coolantburp - Auta a dopravní prostředky
I hope this helps! Let me know if I missed anything or if you have any questions!
Good info, nicely explained understanding process.
@@corychiocca4227 Glad you enjoyed it man!
do you know if same on a 2002 sportsman 500
Thank you!
John Taulien you’re welcome!
Thank you. Saw I was low on coolant after a deep clean.
Well done. Buying coolant now.
Glad I could help man! That's what it's all about!
Yes putting the quad on an incline or just jacking the front up is the way to purge any air. Thanks for an info video !
Great video! I had to do mine today, which is how I found your video doing a search. Worked like a charm I did get bubbles and it sucked the fluid down a couple of times and then stayed full. Thanks for sharing.
My 570 is just above the minimum level, so I’m going to just add to the reservoir tank this morning and keep checking it to see if it changes any, thanks for the video sir.
Awesome man! I'm glad it helped!
Mine overheated for the first time in the (almost) 5 years of owning it just last Friday and lemmie tell you, I really appreciate this video. Honestly forgot where the radiator fill was 🤣 and ofc the rest of it was helpful aswell, but that was my main issue lmfao
Glad to help!
Hi
Hay una maguera que va desde el deposito de refrigerante al tanque de gasolina qué funcion tiene. Gracias
Just an FYI if you drain the whole system. There is a bleeder screw on the left side of the engine that needs to be removed until it overflows. Close it once full and they continue with filling it like this guy. If you aren’t getting it to burp or flow into the radiator, squeeze the hose running to the engine to help push out the air bubbles.
Thank you.. The battery on my 2016 450h.o. ( basically a detuned 570 ) died and as I replaced it, noticed the reservoir was empty. Very hard to see the level unless you put a light behind it. You gave me everything I needed to know and to make sure it’s completely full. I’m going to park it on a hill right now and do your procedure. Thank you again.
Awesome! Yea that reservoir is hard to read. It would be easy if the coolant was blue or orange! I am glad the video helped you, in the future I won't be as long winded. haha
Thank you your video saved me going mental trying to figure it all out
Wild n Wonderful Outdoors to save the day! Haha, glad the video helped!
Great video. And as you said I couldnt t find a video about this and it’s exactly what I need. Thanks
Thank you I'll be doing our 2022 sportsman 450 soon and I will do a video on that year and model and how to as well thank u again
Bro, that was an awesome video. Totally Helped me out !👍👊
Thanks for the video. This was 1 video I could not find
Glad it helped you out!
Thanks man. I just bought the same machine and the overflow reservoir is empty. Thanks for the tip.
I hope this steered you in the right direction! I appreciate the feedback and support!
Drain plug I finally found it but for people that can't would nice to have a drain plug vid
Nice I’ve been looking for this one for a few hours short sweet to the point
Good deal. Just flushed mine out. Thanks for sharing. 👍👍
TheHouse you’re welcome! Glad it helped, that’s what I made it for!
good info! recently purchased a 16 sportsman 450ho, overflow is dry, unsure if thats bad as rad is full but will top it to at least min line....but thats why i hate polaris they make something so ez so hard, alls they had to do was make a hinged lid w a clip to open it!!! also a longer cbl for the rack lid so it goes past vert!!!! so dumb, they just dont care about the end user
I work on atvs and dirt bikes for a living lol and never done a liquid cooled atv or dirt bike yet til recently lmao
Thank you for the information buddy I got 2018 polairs 570 you got new sub now.
Awesome man! I’m glad it helped you out! Thank you for subscribing! I’ve got plenty of content on the way!
@@WildWonderfulOutdoors how do I remove the differential drain plug of stripped
@@caseyfirewood3059 if you have instagram send me a direct message with a picture and I'll see if I can lead you in the right direction! @vaoutdoorsman_
Thank you, tackling it now
Great Video! Keep em coming!
More to come!
Thanks for the video!! That helped tremendously! 👌🏼👍
I'm so glad to hear that! That's why I made it!
This was very helpful, thank you!
So glad to hear! Thank you for checking out my channel!
Awesome video, thank you brother
Thanks that was helpful 👍🏼
Thanks!! I've been needing this
Worked like a champ !!!
That's awesome! Glad to hear it! Thanks for checking out the channel.
Thanks just what I was looking for.
Glad to hear it!
Awesome Video! Helped me out for sure!
Glad to hear it! That's why I made it!
Perfect video bro. Much needed
Awesome! Glad it helped! Thanks for checking my channel out! I'm on the road to 1,000 subscribers!
Great video. will do it tomorrow. Great instructions.
Did it work for you?
Nice video. Thanks for sharing ✌
No problem at all! Hope it helped in some way!
Thank you! Exactly what I needed!
I'm glad to hear it!
Nice video !
My 2016 Polaris with less than 1000 miles is starting to overheat. The light came on and then the motor started sputtering.
My guess is a stuck thermostat ?
I actually own two of these machines they’re both 2016 Polaris 570 sportsman models.
Both under 1000 miles, the one hasn’t caused any problems other than batteries and a oil change but the second one already had to replace the voltage regulator ectifier and now this problem. I’m a little disappointed in Polaris and the maintenance required to keep these machines up ?
and operating.
Try doing a coolant fill and burp. Park it on an incline and let it run.
Very helpful! Thank you
Awesome! I'm glad to hear it! Thank you for checking my channel out! I'm on the road to 1,000 subscribers!
Saaalut @WildWonderfulOutdoors => Merci pour la vidéo cher collègue de Quad ;)
Bye !!
Thank you so Much! I needed to know how to remove that cover to access my fuse box Due to constant EPS Light. Found blown 30 amp fuse I replaced it and no more problem. Hope that someone will be able to use that info
Glad my video was able to help you out man! That is also good info to pass along too! Thanks for subscribing I really appreciate it!
Love ur tires they last long ass time got 3500 miles on my set
Thanks for the video!!
Thanks, very helpful and will subscribe
Glad to hear, thank you for your support!
Thank you for information i using Polaris 570 my favorite guad my father love Polaris
Glad I could help! They are awesome!
Don't forget to subscribe. I have more Polaris videos coming up this week.
You give me idea how fix coolling system i show this video to my father i ride my Polaris in carpatian Mountains, 2015i live in Chicago in my uncle i love USA great people great Country where you live?
@@bffgames8716 West Virginia
Super i live in smoll city in Poland Sanok
Awesome video! Thank you!!
Awesome vid and edits and filming and bike
I really appreciate it!
Thank you very for this video!
You're very welcome! Glad I could help! I am trying to come up with more DIY mechanical videos for it, so stay tuned!
Thank you for helping me
Thanks man super good video
Glad to hear it helped!
Good video; thank you.
Thanks for the passed on information appreciate it
Great video. thanks!
Glad to hear it! You're welcome!
Thanks for the video
Absolutely! Hopefully it helped a little!
Thank you so much for this video.But Im facing the problem now that the hose of the reservoir bottle is disconnected from the radiator and don't know where / how to connect it back. Thanks in advance for your help.
It should come right out of the top of the radiator.
@@WildWonderfulOutdoors Thanks again !!!
Would you take a pic of the top of the radiator ? Cannot find any pin where to connect the hose.
Thanks in advance
Did you ever find the conection point for the little hose from res tank ?
Question. Where do you connect the tube for the overflow? I was hoping I could see on yours. Mine came off! ugh ... not sure where to connect it to. Mine is a 2017 Polaris 570n Sportsman. Thank you in advance.
It just pushes into the top of the reservoir cap.
@@WildWonderfulOutdoors
I know that, that is connected on the overflow little jug. I guess didn't make myself clear, sorry about that, it goes up towards the main coolant part. Thanks again in advance. I cannot find any pictures on it at all, and driving me cray, cray ... lol ... even though I am a gal and older.
@@WildWonderfulOutdoors
Thank you SO VERY MUCH. I called the local Polaris and they told me that the little narrow hose didn't hook to anything, just the big fat one. IF it wasn't for you, I wouldn't have gotten as far as I did ... lol ... now to go buy some coolant to have on had and fill up the little reservoir. Have a great day. Again, thank you.
@@kerriemert7263 ahh sorry I didn’t realize which hose you meant. Sorry about that! Glad you got it figured out and I’m glad the video helped! That’s why I made it! Have a great day :)
@@kerriemert7263 did you ever find where the overfill line goes the coolant line?
hey man great vid what type of coolant is used for the Polaris is thier a certain type?
Yea man, everyone I've spoke with at Polaris said to specifically use Polaris coolant. It is the same thing between car manufactures. Using different types of coolant can cause corrosion on different parts inside the motor. You also want to match the color you have in it. If it looks clear it is the yellow. There are a couple choices, but just ask one of the guys at your dealer for help.
How does the 570 hold up? I’m looking at one now but has 12000k on it. Just wondering if there’s anything to watch for?
I love mine. I have had zero issues and the thing is a beast! Hope this helps!
This was definitely helpful...
Awesome! Thank you for checking out my channel! I'm on the road to 1,000 subscribers!
Thank you sir, big help
You're welcome sir! I'm glad it helped, that was the whole point to making this video!
Overflow hose left in the air or where it is connected
Just curious as I am NOT a mechanic lol, why do you have to add it through the top if you can pur directly into the resivoir?
So that gravity works on your team and pushes all the air bubbles to the top. You want your coolant system to be bled and sealed, that's how it works properly. If an air bubble gets stuck in the cooling system it can cause problems such as the thermostat not opening when it should and poor flow of coolant through the motor. It is good to fill at the highest point you can so that all the air goes to the top, then top off the reservoir. That help?
Do i need to put in Radiator and in the Rezervoar or i can only put in Rezervoar?
Thanks I didn't kno that. I jus subscribe
Awesome! Glad it helped, welcome to the channel!
I’ve had a rad relocate and was wondering where the overflow line goes from the cap of the reservoir. 🤷🏻♂️
Where was it I’m trying to find where it goes on my quad. The overfill line
Do you have any videos on the oil change process?
Salut . Impeccable merci 🇨🇵
Good info, thanks alot.
My friend bike I borrowed has been heating up and I'm only driveing slow
He's coolent looks clear why
The factory coolant is very clear, or its water. Driving slow doesn't necessarily mean lower heat. There isn't enough air moving over the radiator to cool it. You probably hear the fan running a lot. Don't baby it, they need to be driven.
Thanks for the video, did you notice your machine running hotter than normal before doing this, and if so, was it better after? I recently purchased a 16 sportsman and noticed this evening that the reservoir was very low and it's been getting hot, quick.
You're very welcome! I hope it helped out. I noticed my fan kicking on a lot, plus I'm just curious and wanted to check fluid levels. After topping off the coolant and burping it, I can only remember my fan coming on once the last time I was riding.
Thank you sir!
You're welcome! I hope it helped!
What was the name of that Polaris bottle you were holding? Is that the same one I’d need for my 2021 polaris sportsman 570? Any help would be appreciated. Thanks
The coolant itself?
Thanks for sharing helped out alot what kind of back seat is that?
Glad to hear! Here is the link for the seat back. I found a killer deal!
www.walmart.com/ip/QuadBoss-J-R-S4-C-Seat-Cushion-for-Rest-N-Store-Rear-Trunk/857265584?wmlspartner=wlpa&selectedSellerId=11775&adid=22222222227158040615&wl0=&wl1=g&wl2=c&wl3=267999389188&wl4=pla-636316474232&wl5=9009439&wl6=&wl7=&wl8=&wl9=pla&wl10=125214892&wl11=online&wl12=857265584&veh=sem
very helpful thanks
You're welcome! I'm glad it helped!
Hey, great video!
My problem is that the expansion screen is basically empty/minimal in - and not between the min/max limit as it should be.
But the actual vessel above where you fill is up to max level (to the top as you did. and it stays there)
Brand new machine.
Should I fill the expansion tank manually or is some pump/thermostat acting up? My machine overheats all the time. Not sure what to do except get it to my dealer.
Tried to fill the expansions tank manually but it didnt do any changes, since it's not that function for it either.
I went to my dealer now with it, shall update when I know more about it! :)
Said it's all normal..
Thank you so much man🤙🏼
You're welcome! I hope it helped you out!
Where does the overfill line atach to?
should go up towards the top of the radiator.
What kind of coolant do you use? 50/50 mixture?
Polaris factory coolant. No mixture.
How do you drain the system? Is there a drain or just pull lower hose off I need to do a full fluid exchange
Suicidaljello you can either do that or pull the water pump cover off. You’ll probably get a better drain with the cover off.
When I do this with my sportsman the coolant just pukes out from the rad cap along with a bunch of air bubbles, should I keep burping or is that a symptom of another issue?
Keep burping it, you should be able to idle with it topped off.
@@WildWonderfulOutdoors hell yeah the sportsman is back up and running this morning, thanks a lot man
@@762GhosT0 That's awesome man! I'm glad the video helped out!
Thank you
Hey man! I’ve a Question. yesterday I was riding and the small hose was disconnected from the tank and I don't know where it is connected.
It should go right into the cap.
Thanks dude
You're welcome! Glad to help!
Do you know if a quad overheats it may need burping
It would definitely be worth checking.
Hey I noticed my coolant was low on my 2017 570 so I added it as you did but it’s running it burps air and then once it’s warm the fan kicks on and sucks some down then once the fan turns off it goes back up but it keeps burping a little even after for running for 15 mins any ideas ?
How low does it go? It seems like your system is probably working as it should, is your reservoir topped off as well? The fan kicks on to push air through the radiator that is pumping coolant through the motor as it runs. Another thing I did was rinse the radiator at a later time. I realized that it was chocked full of mud. It needs air passing through it to function properly.
@@WildWonderfulOutdoors what do you mean how long does it go ?
Low, not long. If it only drops a little I wouldn't worry.
@@WildWonderfulOutdoors even if it bubbles just. A little is good ?
Yes, heat causes things to expand, if it comes back to a normal level you should be good.
Would this be the same for a 450?
I don't own one so I'm not sure, it should at least be close. So you can still use the content for reference for what you're trying to do.
Thanks
Hope it helped!
Where’s did u get that piece to unscrew the bolts?
The tool? It's just a T25 Torx bit.
Anything special about polaris coolant or will any coolant work
From working on cars for a living, some coolants can corrode engine components and cause damage. I always use OEM coolant in my repairs, the guys at the dealership said to use the specific colored Polaris coolant so that's what I'm running.
@@WildWonderfulOutdoors seems like the coolant game is another scam
Where does the coolant reserve pipe ends at?
The overflow pipe?
preciate it fam
No problem man! Thanks for checking out my channel! I'm on the road to 1,000 subscribers!
What year is that atv just brought 2019 570 wounded if it’s the same place
Frank Turcol it is a 2015. It might be close enough to at least lead you in the right direction!
Mines a 2018 and it's in the same place. I believe the layout for all the 570's are similar.
Did that the. Fans came on and overheating light
Did what?
@@WildWonderfulOutdoors i said the coolant won’t go in the radiator because its full of air lol has a mechanic there is a little bleed screw on top of the thermostat housing! Is that better ? Saying what to insult the fact im French Canadian is a little mans move
@@palisicky I have no idea where you are from and that has nothing to do with my response. What you said didn’t make sense so I simply replied “did what”? I’m not aware of a bleed valve. I was told from a Polaris dealer that they park it on an incline and top it off until no more bubbles come out, then fill the reservoir. Pulling the I’m offended card seems like a little man’s move in my opinion. If YOU know there is a language barrier maybe make that known and not attack someone? Hope this helps.
There is a bleed screw it's on the left side under the gas tank. I was having a hard time getting all the air out of mine even on an incline. It took me a while to find it's behind a plastic air conduit.
@@brianhobson3468 awesome find! The guys at Polaris couldn’t even tell me that!
So it has to be parked on a incline to get the air out correct???
Yessir! It doesn't have to be super steep, you are just making sure that the fill point is the highest point of the cooling system and let her idle. Fill as you see coolant getting sucked in until it doesn't drop anymore. Fill the cooling system first, then top off your reservoir. Hope that helps!
Ok thanks I just bought this one used...it has a radiator relocation kit and I think it has a bubble in it...
@@scottypetty9117 MIne is stock, if the rad cap is the highest point this should still work.
@@WildWonderfulOutdoors it is sir thanks again..
@@scottypetty9117 Absolutely, thanks for checking my channel out. I have a pre ride inspection video on the Polaris too. Check oil etc. Also a couple rides, nothing crazy, but these machines are awesome man, enjoy!
Can you put it in the coolant tank in between the front tires?
Do you mean the one in the left side wheel well?
@@WildWonderfulOutdoors yes, but I believe I heard it was the overflow tank
@@brafshsyt Yes, the one in the wheel well is the overflow/reservoir. If you just need to add a little than yes you can just top that off. If you need to fill and burp, you need to fill through the radiator cap.
I think thats the overflow not the reservoir. When it runs the level goes up
Same thing on any cooling system. It is where extra coolant is stored and where extra coolant goes when the system is hot and under more pressure.
Same process can be done on a 2001 sportsman 500 h.o?
bullion bouncer I would imagine it is similar. Just keep an eye on your temperature.
Do I have to use polaris antifreeze or can I grab it from autozone
It was highly recommended to use Polaris coolant and to even match the color. The issue with using different coolants from different manufactures is sometimes certain blends can lead to corrosion within the motor. That's why in the car world, all manufactures make their own coolant and there are specific colors for certain vehicles.
My 2010 Polaris had green in it but I did a full flush with water and it's been sitting for weeks but my dealer doesnt have and fluids currently
If that's the case, I would either order it online or wait until they get some in stock and keep running water for now. That way it's an easy flush and you can get the right stuff in it.
More incline
Decent vid. Some good info. Future vids..... skip the music..... no value added.
I appreciate the input!
Where your watch next time or some mechanics glove 🤣
TheJbash you love my tan line! That’s from last weekend on the boat bass fishing.
Can we hope to get a500 subcriber giveaway bro
Yes, I will be announcing the winner tomorrow. You just have to subscribe and let me know you are subscribed and you are entered!
czcams.com/video/9wLsnHZGzm0/video.html
Thank you! Super helpful
Awesome! Glad to hear it!