Installing primary weights and spring on a 2012-2013 750cc teryx4. Should be the same on 2014 800cc and up. NOTE: I only show changing one weight. Do them all!
How did you end up liking this clutch mod , and did it give you a lot more power or what I’m stuck on this one or this jbs clutch and between all this arguing between the two I can’t tell who is right and who is wrong . Please let me know what this did for you so I can decide I would greatly appreciate it !!
Hi! Thanks for the video! I recently purchased the VForce John kit for my 2020 t4! Any chance you can let me know what your tire and wheel setup is? Also are you running superatv a-arms and a lift? The kit I purchased came with the weights and springs exactly like you have in your video, however my weights are not setup like yours. Im running 30" AMS Mud Evils with a 2" super atv lift and control arms. I am thinking about tackling this job by myself, however I do not know how to setup my weights. Any input? Thanks in advance!
Did John set your weights up for you? If he did then they should be pretty close to what you need. If not I would give him a call on recommendations, because mine did exactly what I wanted them to do so I never messed with adjusting them any further
this is the vfj kit with springs and weights only. I did not have the primary machine. The clutch comes off using an impact and I believe it is a left hand thread. There is an arrow showing you which way to tighten or loosen. the secondary I left on the machine
Nice video, Thanks for sharing!
How did you end up liking this clutch mod , and did it give you a lot more power or what I’m stuck on this one or this jbs clutch and between all this arguing between the two I can’t tell who is right and who is wrong . Please let me know what this did for you so I can decide I would greatly appreciate it !!
Travis D Shelton I'm satisfied. It's got a lot more punch down low, and no belt issues
How did you get the pullies off?
Hi! Thanks for the video! I recently purchased the VForce John kit for my 2020 t4! Any chance you can let me know what your tire and wheel setup is? Also are you running superatv a-arms and a lift? The kit I purchased came with the weights and springs exactly like you have in your video, however my weights are not setup like yours. Im running 30" AMS Mud Evils with a 2" super atv lift and control arms. I am thinking about tackling this job by myself, however I do not know how to setup my weights. Any input? Thanks in advance!
At the time I had STI HD3B beadblocks and 27x9 and 27x11 Roctane tires. Everything else was stock.
Did John set your weights up for you? If he did then they should be pretty close to what you need. If not I would give him a call on recommendations, because mine did exactly what I wanted them to do so I never messed with adjusting them any further
this is the vfj kit with springs and weights only. I did not have the primary machine. The clutch comes off using an impact and I believe it is a left hand thread. There is an arrow showing you which way to tighten or loosen. the secondary I left on the machine
which clutch kit did you install?
Where did you buy the kit?
V force John. You can google it
nice job. I want to by clutch stage3 😑advice me please I'm from oil country
the oil country? just sell more oil and get a razor