Honda CRV | Front Strut Assembly | 2002 Honda CRV Shock Mount
Vložit
- čas přidán 12. 09. 2024
- Welcome back to the channel
In this weeks video I show you how to replace a complete strut assembly on a 2002 Honda CRV all-wheel-drive. The reason I replaced the complete assembly was because we had two things that were wrong with the one side that I show you in the video. You will see in the video a grimy oily looking sort of substance on the shock, that is because the shock is leaking. Right in the beginning of the video you will hear the reason why we are primarily replacing it, it is because of the annoying irking sound that is coming from the strut mount. Basically it makes this sound any time you go over a bump which of course will drive you crazy. So hopefully if you're having the same issue my video helps you out. Of course if it does please subscribe to the channel to support my work. Thank you in advance.
As always thanks for watching and we will see you in the next one...
Excellent work. You do a great job covering the commonly made DIY'er mistakes in a humorous and memorable way. New Sub. Thanks!
Thank you so much for the compliment I really appreciate it.
Dude, best video ever. The blooper real had me rolling. Much needed while wrenching in my rusted out crv. Keep it up man, awesome channel.
Thank you so much for the comment it really means a lot.
Clearing explanation for struts replacement. Great work
Hey Abdul, thanks for the compliment. Don't forget to hit that subscribe button.
Very good video,so funny 🤣. Thanks ,I like all your mistakes and bad words.
Glad you like them!
I refuse to get rid of my CR-V (I have an irrational love for it plus an ungodly amount of money put into the antisocial stickers on it😁) and your videos have me both dying laughing and being able to keep it running after 205,000+ miles! Greatly appreciated!
Thanks so much for the comment Tamara. I'm glad I could be of help. They are definitely a great vehicle and I say as long as it's not rusted out oh, keep it going :-) .
What is a good brand of front struts you recommend I have a 2004
Only 4 comments? Wow, this was a great video. Thanks for putting this together. I’m looking into changing to change just the strut mounts of the 2014 odyssey but this was very enlightening
Thank you so much for the comment 😊
Wish I would have watched this before I took out my outer cv axle out
Made it almost 9 min in. Great work. What quick struts do you recommend for front end?
The Monroe quick strut is the most popular in my area. So far I haven't really had any issues with them. So I wouldn't be opposed to recommending them. But sometimes for different makes they're not the best. So definitely look up the reviews. If you're getting them for this particular car we didn't have any complaints from the customer.
@3:13 (tie rod nut area) is that open air space missing a plastic shroud for the engine bay 🤔
No, there is no missing plastic that I know of. It is a pretty big hole though.
Gave the video a thumbs up. But Monroe/Gabriel strut assemblies are cheap, but there's a reason for it. Cheap struts and crappy springs. Keep the original springs where possible and use KYB, Bilstein, Koni or another quality brand. Monroe is a waste of money and labor....good luck
yep yep
I don't necessarily disagree with you. However when running a shop it depends on what the customer can afford and what they're comfortable with spending. Also being up in Canada we don't have many aftermarket suppliers who have those brand names it's mainly just KYB or Monroe.
@@JimmysAutoClinic understood, makes sense. the previous owner had the monroe quick struts replaced 40k miles ago in my CRV. when I bought it from him the struts were completely shot. My experience with kyb is they last 70k miles and Bilstein lasts 100k miles. Better to pay for the labor less often. This morning I replaced the tensioner pulley bearing for the serpentine belt. the difference between the cost of a cheap junk bearing and a quality bearing is not much. But had I brought it to the mechanic, labor cost would have been significant. Keep up the good work!
where did you get your thread tapping wratchet from? I need one
how's the struts performance till now? and what brand is it? thank you!
Hey, unfortunately the vehicle in the video was written off a few months after filming it. Until then there were no complaints were issues in regards to the shocks. I have use the same shocks and brand of shocks on other vehicles and generally they last anywhere from 3 to 7 years depending upon the conditions that they are exposed to and of course the mileage. They were Monroe. Hopefully that helps don't forget to hit that subscribe button.
@@JimmysAutoClinic Gave the video a thumbs up. But Monroe/Gabriel strut assemblies are cheap, but there's a reason for it. Cheap struts and crappy springs. Keep the original springs where possible and use KYB, Bilstein, Koni or another quality brand. Monroe is a waste of money and labor....good luck
What kind of tie rod end tool did you use?
The tie rod end puller was from OTC I don't have the number in front of me but it is similar to 7503HD OTC
I have more of a clunking sound, could that be my front upper strut mount? The rubber near the center bolt seems broken/severed.
Hi Erik, if you have a visible damage to the strut mount then that's probably what your noise is coming from. Unfortunately without me hearing it I can't be certain. The other unfortunate thing is that there are a lot of potential noises on that particular honda. I would say the best thing to do is to of course check everything that you can and of course replace whatever is worn or damaged.
@@JimmysAutoClinic thanks
Do we need to do wheel alignment after that ?
Yes I would suggest doing an alignment afterwards. Especially if it is not the same as it was before. The sooner the better.
i dont think so
Anybody knows where to order 2003 honda crv front strut assemblies fir driver and passenger sides
Are you in the states or in canada? Are you looking for online or in person shopping?
I only need to change the shock pad...no need to go through all that hullabaloo
Hey my friend sorry I don't know what the shock pad is but good luck with changing it my friend.