Highly recommend you buy OEM or high quality ball joints because cheap ones will come out when you press them in. It might be better to just keep the old ball joints just repack it with grease and put a new boot on it
This was extremely helpful, thank you so much for this. Please, if you have any more for this car can you create a playlist for Honda CRV Mk2? Thanks again.
I have a question I did that work with a friend in a 04 crv that ball joint that was there I don't know why didn't have the snap ring and the new one is the same as the alod one is short and you can put the snap ring neither now I don't know if he buys the wrong ball joint
it might be the wrong one, you should check again the place where you got it from because it is supposed to fit with the snap ring, thanks for sharing.
it was seating on piecs of wood n took the bolts out in about 5 seconds because the impact gun, so it is good to do the things according to the situation n tools at the moment, thanks for sharing.
Cheers I just got an ebay kit need to change both mine I'll be using your video to walk me through it. I didn't get OEM parts but they say they'll fit so we'll see.
Hi JM, I wanted to ask do you need to remove the lower control arms if you're just replacing the ball joints? Can you replace them without removing the control arm?
A lot easier when you remove the caliper and ABS sensor I also recommend loosening the lower ball joint prior to taking anything apart
You can also rent the ball joint press from a auto parts store. The OEM ball didn't have a C clip, but the replacement ones did.
So much easier if you remove the caliper and tie it off to the side.
Very conscientious detail.. Great job 👍
Thank you so much 😀 very appreciated comment.
Highly recommend you buy OEM or high quality ball joints because cheap ones will come out when you press them in. It might be better to just keep the old ball joints just repack it with grease and put a new boot on it
your comment is so appreciate it, it is always better to use OEM parts.
Honda does not manufacture ball joints for this. You have to replace the knuckle
@@envfirefrost3633I bought mine at O'Reilly's
Muy buen trabajo compa, buena enseñanza muchas bendiciones
gracias Amigo y vendiciones tambien a ti y a tu Familia
Very thorough repair!
thank you appreciate it.
This was extremely helpful, thank you so much for this. Please, if you have any more for this car can you create a playlist for Honda CRV Mk2?
Thanks again.
thanks for visiting this channel, I will creat a list soon.
@@JM-AUTO thank you so much, my CRV has a lot of work needed and this is my first Honda so these videos are super helpful
Hello Sir. I ordered some MOOG ball joints, but it doesn’t have a snap ring. What brand are those you installed?
brand: quick steer, part number: K80223
You're very helpful :) great job
I think that's because he said it was an 4wd model. The non 4x4 doesn't have a snap ring. Maybe I'm wrong.
Impressed! Good job
thank you I really appreciate it.
Buen trabajo señor. Estoy filmando este trabajo ahora.
Q bueno me Allegra mucho y gracias por tamar SE el tiempo en Este su canal.
I have a question I did that work with a friend in a 04 crv that ball joint that was there I don't know why didn't have the snap ring and the new one is the same as the alod one is short and you can put the snap ring neither now I don't know if he buys the wrong ball joint
it might be the wrong one, you should check again the place where you got it from because it is supposed to fit with the snap ring, thanks for sharing.
@@JM-AUTO thanks
how do you deal with the shock dropping down super far? if say, it sat for a while..
it was seating on piecs of wood n took the bolts out in about 5 seconds because the impact gun, so it is good to do the things according to the situation n tools at the moment, thanks for sharing.
Una pregunta, que marca utilizaste para los ball joints en este caso?
quick steer, gracias por tu tiempo en este tu canal deveras se aprecia mucho
God bless u too
Excellent!
Glad you liked it! thank you.
good job ,,,but,,,cant you just break the ball joint loose,,lower the control arm and press it off????
no not on this one you have to remove it the whole assembly, I really appreciate to to visit this channel. thank you very much.
You have to remove the Axel nut and the 2 strut bolts to get access to the lower ball joint.. he didn't show that part in the video..
Where can we find ur shop .
Buen trabajo!
gracias Amigo deveras se le agradese muchicimo.
Pretty messy, and potentially damaging. Take the calliper and rotor off too. 👍
I'll be using this those two adapters where did you buy them from and thank you jdm
thanks for the visit, the ones I used in this job were matco but I have other brands too. thanks for asking.
Cheers I just got an ebay kit need to change both mine I'll be using your video to walk me through it.
I didn't get OEM parts but they say they'll fit so we'll see.
Sorry I mean to say JM not jdm.
@@c0ffe3mn88 great im glad, you will do a great job.
Hi JM,
I wanted to ask do you need to remove the lower control arms if you're just replacing the ball joints? Can you replace them without removing the control arm?
U hv a full costumer care
hi, what state are you at. im in NY
☘️🍀🌟⭐👍
gracias Amigo y vendiciones
Don't use oil on on the rubber, it'll destroy it. Silicone only.
thanks for taking the time to watch this video I will always appreciate your time on the channel.