Polaris Secondary Clutch Float Mod
Vložit
- čas přidán 18. 01. 2023
- Link to XP 1000 Products www.hunterworks.com/polaris_x...
In this video, Todd is talking to customers who have bought the Hunterworks Clutch System or HW Fresh Start System for the RZR XP 1000 2016 and newer. He describes a new option called a "float mod". The float mod allows the secondary clutch to align itself. - Auta a dopravní prostředky
Your son has really stepped your video quality up!
That's pretty slick Todd, I'll look it up I think it's a great idea!!
You said more play allows secondary to self align. Snap ring moving outward would give the same play to self align
Seeing you do this, got a question that's probably already been asked, I bought your round pucks for my 2020 1000 s, I've moved up to pro xp , haven't had cover off , but getting ready to get Dalton kit, and belt, didn't see pucks listed, did they change set up, or?
Didn’t change just different clutches. So do dalton and our washer for it
@@Hunterworks thank you
You seem too know alot about clutching. You should consider making kits for cfmoto zforce line. It's a huge market and the cat clutches are a good piece. Ty
We might at some point
Just bought a 202 Polaris 1000. Taking off in high range there’s a bit of jerking so pulled the cover to check the clutch. All seems fine but my question is, how deep should the belt be in the secondary clutch? The top (outside) of my belt is about 3/16” below the outside of the clutch.
Most is see appear to be flush or slightly above. Can this be adjusted?
202??? Miles rzr? Xp? All sounds normal to me and that’s where the belt should be if a rzr
Hey todd I've been watching your videos on clutching. Quick question my secondary clutch bolt came off while riding, my cover kept it from flying off. Locking bolt and everything came loose afte torquing it back it got loose again any idea why its happening?
Sounds like the secondary is turning on the shaft for some reason and turning the bolt off with it
I used blue Loctite hopefully that keeps it from spinning.. thanks for the response. Keep up the educational videos coming 👍
@@OjosCafes84 its won't unfortunately
I was trying
to take the bolt out of the secondary and the bolt so tight it stripped the bolt any idea how to get it out now
Can you strip the bolt or the head?
17 rzr turbo here. After watching this video… Eating up a belt top and bottom groves wouldn’t be caused by the secondary snap ring coming out of the grove??
Not sure how you’re making a connection but yes on what you said.
@@HunterworksI emailed some pictures earlier of secondary. 5k miles on machine I’m not sure what acceptable wear is on clutch items
@@delbridge11l I’ll see it Monday
@@Hunterworksawesome
is there a way for this to work without having the hunter works secondary? 2020 RZR 1000 here. belt seems to rubbing on the motor side sheave of the primary
No way with the factory secondary, but you simply have an alignment issue, get our alignment tool
@@Hunterworksalignment tool will be here today. will it push the secondary back out to make the belt sit properly? because it won’t grab the belt until 3k. i also lost all forward movement on easter while driving. heard something in the rear and had creeping, hard to shift and no movement.
@@drewscheer4329 Sounds like you have two issues, one alignment and two something going on in the primary, watch our primary clutch troubleshooting video. The alignment tool makes the shafts parallel which moves the belt to the center
@@Hunterworks alright. the alignment tool is in. will watch the videos and check it everything out. see if the alignment fixes it
Even after i align the clutch. Is it okay to still do the float mod?
yes
Does this help with secondary squealing noise?
Yes because this is the better secondary we sell
Sorry Todd. I completely loose the point of the video. May be because you leave the rest to imagination? What the washer are for? You leave in there? Centering what? So confused
Simple answer lets the secondary move or float instead of being fixed so that any minor alignment issues won’t matter and allow the belt to center up in the primary clutch.
@@Hunterworks Never thought to have a prompt answer. ha ha Thanks, thanks a lot!!!
BTW, I tried to buy one of your Belts and couldn't. Its for newer models 2016 on only? Mine is 2013. It say have not available for my car. Im so sad
@@hectormelendez9298 we just out. We sell them