Managing Tolerances in CNC Programming | CNC Skills Webinar
Vložit
- čas přidán 25. 06. 2024
- As a CNC Programmer, how do you manage toolpath creation and machining strategy to achieve a wide range of tolerance requirements? Are you fully utilizing your equipment to it's maximum potential to create efficient programs and maintain tight tolerances without manual operator intervention? If you deal with frustration, waste, or delays caused by manufacturing variation and communication, this event is for you!
Join our expert for the final webinar in our 3-part Manufacturing Tolerances presentation where our Design and Manufacturing Experts will explore tolerances in #design , #3dprinting , Machining, Quality Inspection and more! We’ll explore industry standards, general practices, and recommendations to avoid problems and frustrations for each department involved.
Learn about:
-Selecting the Right Toolpath
-Managing Tool and Work Offsets
-Programming for Tight Tolerances
-Selecting and Managing Tools
-Locating Forged or Cast Stock Material
#mastercam #mastercamtutorials #cnc #cncmachine #cncmachining #cncoperator #cncsoftware #cnclife #cncdesign #manufacturing #mfg #manufacturer #manufacturingsolutions #tolerance #qualityinspection #qualityassurance #cncprogrammingtraining #cncprogrammer #cncprogramming - Věda a technologie
16:19 except the first cut is at roughly 75% AE instead of the input 45%.
The parameter that controls the first cut engagement is called Across Overlap. That allows you to adjust the outer most passes relative to the selected geometry. It works in reverse though, so a 0 value would inset the tool fully inside the geometry. In this case, a setting of 25% would get you a 75% initial cut from the side.
I definitely learned some new things here: Chamfer Drill tool path. . . How long has that been there?
Also didn't know that verify would use the first stock model in the selected opps. Thought you had to set that up as part of stock setup. Good stuff. Thanks!
Happy you learned some new things, it's always a rewarding payoff to know that people are learning from our content! Also, the Chamfer Drill toolpath was introduced in Mastercam 2021. 😎
Very useful information
Thanks for this webinars
Absolutely! I hope you can make it to the event. If not we'll post the video here after it is over.
@@MLCCADSystems pls post video. I was searching for this type info. Thank you
We've got you covered! The video will be going live very soon.
Here is the video czcams.com/video/c1hwvbiE-WE/video.html, if you enjoy it we would appreciate a sub!
@@MLCCADSystems subscribed