I thought I had all àbout DStv installations till I found your video I learn so so much from you thank you so much 😭🤞 but I want to become a professional installe I don't know where to start or ask you are my best hope now please can I have some information on which steps I need to take to become one 🙏🙏 bless day uncle and that you for sharing your knowledge with us god bless you ...
I believe this video has helped you to fix your dstv problem. support the channel with a like , subscribe ,share and comment below. Thanks and god bless.
Thanx so much, the other TV is playing bt this one is saying weather story and E48 something like that, so i rebbot it and follow all the instructions from you bt at the end says,this function cannot be performed as the signal strength or signal quality is poor.Please ensure that your signal strength or signal quality percentages are high enough I follow yr instructions from the start I,ve checked LNB at the back cut the wire put back again nothing,so now I don't know what to do, please help me.
My dstv premery decoder video an audio check cabill betwen decoder if this eror masege canot be cleared call multichoice acrediate installation for assistance
E143 ERROR NO COMMUNICATION FROM PRIMARY DECODER. I'm using 5s HD Model No:112 Zappa decoder as Secondary but I have NOTES that on the secondary decoderl that in the Quick Setup of INSTALLATION WIZARD instead of Option DECODER 2 that suppose to work correctly with USER BAND 3 INDEX(2040) n 4 INDEX(1006) DOES NOT PICKING. Even several attempts to change it has failed. But last Option DECODER 3 is automatically given me the needed USER BAND 3 INDEX(2040) n 4INDEX(1006) and that one too the pictures don't display NB: In spite of all Channel 100(dish) is working fine on that Secondary decoder and Again NO Problem on Primary EXPLORER DECODER Why all this Desperately Embarrassing? HELP IS ALL I NEED
I have done this four today after everything all channel will be available then I will choose 202 then after sometime it will go off again no signal and blaablaa
Please help me , when I turn on my dstv it always comes that I upgrade , I upgraded yet still it comes for upgrade I upgrade but all channels come after, so I asked the guy who fixed it to come check it out and cancel that upgrade and he rest my dstv to factory and now it is not even working again , my signals are all gone and nothing works awww am sad I don't even know what to do. I get stuck at the universal type it won't scan because it says no signal, turner 1 and 2 signals don't show
Thank you for this video it was beyond helpful for I was frustrated and now my tv is playing. God Bless you
I’m stuck in step 4 how do I go back
@@mrraymond5158 ccccl
Am on step 4 because LNB shows unicableTM/satCR and SMaTV only what should I do
Thank u so much , I followed ur instructions and Im sorted ... U saved me from calling a professional who was gonna charge me .. 🤞🏿
This helped me a lot
I have been struggling with E48-32 error message & thanks to the tutorial. My TV is now playing 😊.
I thought I had all àbout DStv installations till I found your video I learn so so much from you thank you so much 😭🤞 but I want to become a professional installe I don't know where to start or ask you are my best hope now please can I have some information on which steps I need to take to become one 🙏🙏 bless day uncle and that you for sharing your knowledge with us god bless you ...
The info was so helpful. Thank you, saved me from paying someone to come and fix.
@@LulonkeNtwana-jr7wl you are welcome
Cant believe it worked.. youve saved me from spending unnecessary... Thank you bro. RESPECT.
Thank you
Thank you, my channels are back even clearer..👌
My DStv since last night couldn't work but this morning I followed your teaching, and it's working. Thank you
Wow thank you very very much I'm so happy some of my channels that has not been showing all are showing now 💃💃💃💃💃💃💃
I believe this video has helped you to fix your dstv problem. support the channel with a like , subscribe ,share and comment below. Thanks and god bless.
Good evening sir, please mine is still showing black line on the signal. What do I do ?
Thank you. I live in a remote rural area. I was able to solve my problem with extra view with your help
Thank you so very much 💐 this video saved me as they advised me at dstv call center to call in a dstv agent.... Imagine?!!! Thank you 😅
Thank you so much you are so good
Thank you so much, this was realy helpful i have saved money because of this video...keep on doing great.
Beautiful thanks for your services it really did a great job for me
Worked this morning, did house work, switched on and got E48-32
What if your explora keeps going to installation wizard because there is no signal and no response after pressing blue button on remote ?
Very helpful thank you for this video 🙏
Thanks its very helpful
Help me please, why is my decorder only shows Home Network but doesn't show Additional Network
Thank you so much sir. The 4 step was what worked for me. God bless you more sir
Thank you very much I managed to fix the error 😀
Thank you, I just saved some money. Keep up the good work.
Thanks for watching
Thanks a lot for the video it really helped
Very helpful, I was frustrated
Thank u very much this really helps a lot
Thank you so much,you have been of great help
You are the Best 🎉❤
Thank you for watching
Thank you. This was quite helpful
Thank you sir! be blessed everyday
Thanks for watching
Thank you, this was helpful
Thanks this helped me
Thank you... So helpful 😊
Dstv problem disk is full and can't delete, go to recordings or even go catch up pls help
Me too how to fix
Thanks so very much dear
Thank you!
You are welcome
Thanks so much
Thanks it worked
This channel helped me . but my decoder keep rebooting on it ad is not scanning
God bless you
Thanks much
Thanks alot sir.
Thanks for watching
After reset will my recording series be available or it will be deleted?
this really helped me
Thank you 😅
Thank you so much, it was very helpful. However in my case the signal bars are grey/black not blue. What could be the problem?
Thank you this was helpful after spending the whole with my tv not working 🙏🙏🙏❤️❤️
Thanks for watching
Thank you oooooooo God bless you
Hi I did pay my dstv and just follow your instructions but my dstv still show there is no signal due to bad weather
Thanx so much, the other TV is playing bt this one is saying weather story and E48 something like that, so i rebbot it and follow all the instructions from you bt at the end says,this function cannot be performed as the signal strength or signal quality is poor.Please ensure that your signal strength or signal quality percentages are high enough I follow yr instructions from the start I,ve checked LNB at the back cut the wire put back again nothing,so now I don't know what to do, please help me.
Hi, I hope you good. How did you solve this as I too have this same problem today😢
Hi, can i use this method when one of my decorders is not clear & the order one is? Thanks.
Please can you help me my dstv is showing e30 and it is old decoder dsd 3u
Goodevening sir, please mine is still showing black signal, what do I do?
Just waitin
What Will i do if my decoder refused to ota upgrade
I'm still having the installation wizard on my tv and it isn't working.
What do I do if the blue bar doesn’t get full it keeps on going back and forth
My decoder can't even reboot now the DStv is stuck on my screen and cannot load
Please can you help me. When my power goes off with load shedding my DStv stops working. It says no signal
How to fix catch up
My remote is not responding how do I go to this steps if its not responding in the first place
❤❤
My dstv premery decoder video an audio check cabill betwen decoder if this eror masege canot be cleared call multichoice acrediate installation for assistance
E143 ERROR NO COMMUNICATION FROM PRIMARY DECODER.
I'm using 5s HD Model No:112 Zappa decoder as Secondary but I have NOTES that on the secondary decoderl that in the Quick Setup of INSTALLATION WIZARD instead of Option DECODER 2 that suppose to work correctly with USER BAND 3 INDEX(2040) n 4 INDEX(1006) DOES NOT PICKING. Even several attempts to change it has failed.
But last Option DECODER 3 is automatically given me the needed USER BAND 3 INDEX(2040) n 4INDEX(1006) and that one too the pictures don't display
NB: In spite of all Channel 100(dish) is working fine on that Secondary decoder and
Again NO Problem on Primary EXPLORER DECODER
Why all this Desperately Embarrassing?
HELP IS ALL I NEED
Hey what if the signal shows -1 percent
Thank u. But mine it's still freezing and showing showers
Hello it’s not allowing me to scan
My dstv boots and go to dark screen and doesn’t come one only green light
I went until the scan 5/5, but it's just going back to loading screen.
Hi how are you
How do I fix E30 that's failed to clear
I have done this four today after everything all channel will be available then I will choose 202 then after sometime it will go off again no signal and blaablaa
You may need a technician to check your signal strength
How do i fix if my tv in room have a no signal
Mine starts while booting and remains in that state
How do you solve wrong time
Please help me , when I turn on my dstv it always comes that I upgrade , I upgraded yet still it comes for upgrade I upgrade but all channels come after, so I asked the guy who fixed it to come check it out and cancel that upgrade and he rest my dstv to factory and now it is not even working again , my signals are all gone and nothing works awww am sad I don't even know what to do. I get stuck at the universal type it won't scan because it says no signal, turner 1 and 2 signals don't show
Hi you can change your universal stap to unicable and scan
What if the signal is 1%
Mine still doesn't wanna scan
My explorer decoder is giving E48-32 error
my explora decoder it reboots itself
Guy u too much about ur channel teach us how to reboot my decoder cuz I vant find my channels
yhooo help mine says E50-32
This did not help
O meu descodificador e explora ele esta em standby
Goodevening sir, please mine is still showing black signal, what do I do?