Very helpful info for in-person recording. One additional scenario that might make for a good video is recording a podcast with a guest who is connected via Skype or Zoom etc.
It's much easier to receive a call via an online service like Skype or Google Hangouts. Depending on your location, Skype, Google Hangouts, etc. can provide you with a fixed number as a service. If you need to take a call from your phone, you will need to split the signal from your phone using two 3.5mm connector cables, connect the output into the Aux in near the headphone jack, and then run a cable from the Stereo out (on the left side of the MixPre) back to the phone. The easiest thing to make this possible is an iRig 2, which is relatively cheap. You may need a lightning to 3.5mm dongle or USB C to 3.5 mm dongle to connect the iRig to your phone if your phone has no headphone jack. Now, in the Outputs menu, select St Out and make sure all your inputs are sent to StOut EXCEPT the aux in. If you are doing the call on the computer, you'll need to be sure to send only your mic and the jingles back to the computer by selecting the appropriate channels in the USB channel settings under Outputs. In this case, you could actually use your phone or tablet for soundpad functionality with a single cable going to Aux in. For jingles, the easiest solution on a Mac is to buy the bundle from Rogue Amoeba that includes Farrago (a soundboard), Loopback (virtual audio routing), and Audio Hijack (a useful recording/routing utility). Audio Hijack can divert input from specified apps to specified USB outs. So, I believe you should be able to direct the output of the soundboard app to two channels on the MixPre (for stereo) or as a mono mix to one channel. With the MixPre-3 bear in mind that 2 out of 5 tracks are for the mix, so this leaves only 3 tracks for inputs. I think you can probably just manage mic, jingles, and phone if each track is mono. Not sure though, I don't have the MixPre-3.
Do you have any idea how long the MixPre 3ii or 6ii lasts when powered by a 20K powerbank with two mics attached ? I would like to use the MixPre 3ii or 6ii in a drop rig to record sounds overnight and into the next day.
Soundboard and hot keys ability plz! I don't care if it's an additional plug in add on charge. I just don't want to have to spend my money with the other companies, lol.
I need to record 2-4 tracks step by step (i mean i start from synth, then i record 2nd synth, then bass). And then this must play all together (like in every DAW). Can i do this with this device?
Dr. Maruti Sharma - the stereo out from the mixpre should go to the camera audio input - I have the EOS R mic input to just one click above zero - in “M” or manual mode on the EOS R you can hit info until you see the camera audio input - the mixpre audio should be gain staged as normal - with the camera input just one click above zero you should not clip - I hope this helps - it will also take me a few days to make and post a video since I am out for the holidays
Dr. Maruti Sharma - as you are talking into the mic - the mixpre audio meters should be hitting around -12 dB (in the green with little or no yellow in the meters) adjust the gain knob as you are taking to reach a good level before recording - that is gain staging
What cabling do I need to make a remote call to connect using just my android phone and record an interview as I use my MixPre 10ii? Do I configure the Mixpre the same as this Podcast instruction video? Do I need software?
@@Beshinemusician So you'll run from the phone to aux in of the MixPre and then set the input of a channel to Aux In. Then monitor through the MixPre headphones. The caller on the other side will just hear your voice through the normal phone mic.
@@sounddev So just to be clear, am I running a 3.5mm (TRS or TRRS) cable from the phone? Is there a way to take advantage of any of the XLR inputs 1-8 on my MixPre 10ii that have better audio quality than the phone mic? I am looking at purchasing a JK Audio CellTap, however, I do not want to use a Headset w/built in Mic. The JK Audio Bluekeeper seems close and really cool, However I don't like the idea of the Bluetooth connect as it is always better with a wired connection.
@@Beshinemusician When you say better XLR quality than the phone mic do you mean coming out of the phone or going in to your caller? Some iPhone programs let you use the MixPre as an interface but Android does not.
@@sounddev Follow up question. If I hook up a High end mic like a Neumann U87, will it operate to its max capabilities. I read around the web that you wanna hook a mic like that to $1k and above stand alone interface. But the Mix Pre seems like it’ll do just as good a job. Thanks in advance for your reply.
@@JayTwizzle It'll do a fantastic job! The biggest draw of the MixPre's Kashmir preamps is incredibly low noise and tons of clean gain! It's apples and oranges but we have a shootout of many popular mics being used on guitar for the MixPre! czcams.com/video/Oqidn2N8zH4/video.html
Very helpful info for in-person recording. One additional scenario that might make for a good video is recording a podcast with a guest who is connected via Skype or Zoom etc.
It's on the way! Make sure you subscribe to be notified when it goes live!
Thanks for these videos. Having to set both "gain" and the normal audio knob confused me at first, but I'm sure I'll get the hang of it.
Why do you have to set both the Gain and Audio knob? @sounddevices
This is very well done. Now, if you’d just update WaveAgent so that it can be installed on MacOS Catalina :)
Rory on a Bike - I wish that too!
Here’s to next iPhone Pro including 32bit float natively. 🤞🏼
Hey, one question...I have the Mixpre-6 II
When I use TC via HDMI + Rec Trigger... why am I limited to 48kHz?
I really would like to record in 96kHz..
Incredible video.
Do you mean that I can record with a boom and wireless. And I can use them separately in post as different audio. Pls answer!
Yes
can mixpre act as audio interface for window or mac?
Yes it can!
@@sounddev for Mac only or both ?
@@mathew_pang For both! For windows you'll need the ASIO driver www.sounddevices.com/asio-driver-for-mixpre-ii-series/
And could you kindly show how to take mobile calls, and add jingles to the podcast using mixpre 3
Dr. Maruti Sharma - you may want to search for Loopback 2 or Audio Hijack - that seems to help podcasters (I am not associated with Rogue Amoeba)
It's much easier to receive a call via an online service like Skype or Google Hangouts. Depending on your location, Skype, Google Hangouts, etc. can provide you with a fixed number as a service. If you need to take a call from your phone, you will need to split the signal from your phone using two 3.5mm connector cables, connect the output into the Aux in near the headphone jack, and then run a cable from the Stereo out (on the left side of the MixPre) back to the phone. The easiest thing to make this possible is an iRig 2, which is relatively cheap. You may need a lightning to 3.5mm dongle or USB C to 3.5 mm dongle to connect the iRig to your phone if your phone has no headphone jack. Now, in the Outputs menu, select St Out and make sure all your inputs are sent to StOut EXCEPT the aux in.
If you are doing the call on the computer, you'll need to be sure to send only your mic and the jingles back to the computer by selecting the appropriate channels in the USB channel settings under Outputs. In this case, you could actually use your phone or tablet for soundpad functionality with a single cable going to Aux in.
For jingles, the easiest solution on a Mac is to buy the bundle from Rogue Amoeba that includes Farrago (a soundboard), Loopback (virtual audio routing), and Audio Hijack (a useful recording/routing utility). Audio Hijack can divert input from specified apps to specified USB outs. So, I believe you should be able to direct the output of the soundboard app to two channels on the MixPre (for stereo) or as a mono mix to one channel.
With the MixPre-3 bear in mind that 2 out of 5 tracks are for the mix, so this leaves only 3 tracks for inputs. I think you can probably just manage mic, jingles, and phone if each track is mono. Not sure though, I don't have the MixPre-3.
Hi, how do i erase a track i just recorded? I see something that says "trash" - but it still is there once i press it. Thanks Mixpre-3 ii
Once you press "Trash" is the file still in the take list? There is a "Trash" folder on the SD card that can be accessed from a computer.
Do you have any idea how long the MixPre 3ii or 6ii lasts when powered by a 20K powerbank with two mics attached ? I would like to use the MixPre 3ii or 6ii in a drop rig to record sounds overnight and into the next day.
Soundboard and hot keys ability plz! I don't care if it's an additional plug in add on charge. I just don't want to have to spend my money with the other companies, lol.
I need to record 2-4 tracks step by step (i mean i start from synth, then i record 2nd synth, then bass). And then this must play all together (like in every DAW). Can i do this with this device?
You can with the Musician Plugin! Ollie Loops has a great video showing you how czcams.com/video/QFkGN8B4Cno/video.html
can I use this for recording professional songs
Yes you can!
Is there a way to connect multiple headphones in case of having multiple guest in the same room speaking?
The MixPre headphone amp is powerful enough that it can still drive headphones while using a splitter!
Question: Can I use the Mix-Pre II as a DAC to power monitor speakers like the Yamaha HS7? Or is that a stupid idea?
Yes! You would need a cable that is a 3.5 mm TRS male to 2x 1/4" TS male.
@@sounddev That's great! Thx for the advice.
Any built in EQ ability?
this is way complicated than i thought
If you don't need the features of Advanced mode you can still produce a professional podcast in Basic mode with the MixPre II!
Hi, can you help me? Where is the serial number of my mixpre 10 ii? I can not find :(
on the sticker in the back near the SD card slot OR you can go to menu-system-version and the Serial number will be listed as S/N:
@@sounddev Thanks! I was able to register my mixpre 10 ii and I was able to access the user guide :)
@@ramiro6906 Hey all right!!! We LOVE registrations! It extends your warranty!
Hi great video. I am struggling to use mix pre with Canon eos R. Could you please make a video on that. I could not find anything online. Thanks.
Dr. Maruti Sharma - what kinds of issues are you having? That’s my setup and I have no issues? I can also make a video and post if that will help?
@@AjushiPhotography That would be very nice. I am confused about matching the camera preamps with mixpre preamps.
Dr. Maruti Sharma - the stereo out from the mixpre should go to the camera audio input - I have the EOS R mic input to just one click above zero - in “M” or manual mode on the EOS R you can hit info until you see the camera audio input - the mixpre audio should be gain staged as normal - with the camera input just one click above zero you should not clip - I hope this helps - it will also take me a few days to make and post a video since I am out for the holidays
Ajushi Photography Thank you very much. A quick question - what is gain staged normal on mixpre?
Dr. Maruti Sharma - as you are talking into the mic - the mixpre audio meters should be hitting around -12 dB (in the green with little or no yellow in the meters) adjust the gain knob as you are taking to reach a good level before recording - that is gain staging
What cabling do I need to make a remote call to connect using just my android phone and record an interview as I use my MixPre 10ii? Do I configure the Mixpre the same as this Podcast instruction video? Do I need software?
How are you coming out of the Android phone?
@@sounddev I have a Google pixel 5 phone using a Headphone adapter with USB-C to 3.5mm.
@@Beshinemusician So you'll run from the phone to aux in of the MixPre and then set the input of a channel to Aux In. Then monitor through the MixPre headphones. The caller on the other side will just hear your voice through the normal phone mic.
@@sounddev So just to be clear, am I running a 3.5mm (TRS or TRRS) cable from the phone? Is there a way to take advantage of any of the XLR inputs 1-8 on my MixPre 10ii that have better audio quality than the phone mic? I am looking at purchasing a JK Audio CellTap, however, I do not want to use a Headset w/built in Mic. The JK Audio Bluekeeper seems close and really cool, However I don't like the idea of the Bluetooth connect as it is always better with a wired connection.
@@Beshinemusician When you say better XLR quality than the phone mic do you mean coming out of the phone or going in to your caller? Some iPhone programs let you use the MixPre as an interface but Android does not.
Can you do professional voiceover work with the built in preamp?
You absolutely can! We have several VO artists using the MixPre as their recorder of choice!
@@sounddev Thanks much!!!
@@sounddev Follow up question. If I hook up a High end mic like a Neumann U87, will it operate to its max capabilities. I read around the web that you wanna hook a mic like that to $1k and above stand alone interface. But the Mix Pre seems like it’ll do just as good a job. Thanks in advance for your reply.
@@JayTwizzle It'll do a fantastic job! The biggest draw of the MixPre's Kashmir preamps is incredibly low noise and tons of clean gain!
It's apples and oranges but we have a shootout of many popular mics being used on guitar for the MixPre! czcams.com/video/Oqidn2N8zH4/video.html
@@sounddev ty ty! 😁