How to Install Heated Grips on Your Harley Road Glide or Street Glide
Vložit
- čas přidán 16. 07. 2024
- In this video I show you How to Install Heated Grips on Your Harley touring bike. The heated grips I install your Harley Kahuna Heated Grips on the 2021 Road Glide Special and Empire Heated Grips on the 2023 Street Glide ST. I show you step by step how to install heated grips on your Harley saving you 3 hours of shop labor or over $450. Follow along as I install heated grips on my Harleys and you to can install heated grips on your Harley touring motorcycle.
Please hit that thumbs up, comment below, share the video with others, and if you haven't yet subscribed to the channel, I would be honored if you would consider doing so.
Product Links:
Kahuna Heated Grips
www.harley-davidson.com/us/en...
Empire Heated Grips
www.harley-davidson.com/us/en...
Chapters
00:00 Heated Grip Install
03:07 Street Glide Batwing Fairing Install
19:11 Road Glide Fixed Fairing Install
31:21 Follow this Video and Save $450
#harleydavidson #roadglide #streetglide #heatedgrips #HDVIBE - Auta a dopravní prostředky
There is a lot packed into this video. As you saw on the thumbnail, this video gives you step by step how to install Harley Heated Grips on both a Batwing (Street Glide) and a Fixed Fairing (Road Glide) motorcycles for the years noted in the video. This installation, includes in bar running of the heat grip cables. I have included chapters for the Batwing and Fix Fairing so you don't have to watch the entire video. However, I would suggest watching the entire video as you may pick up something I did in one install versus the other.
Thanks for watching. Please leave comments and questions below, share the video with others, like this video if you got value from it and I would be honored if you haven't yet subscribed to the channel and would consider doing so. When you do subscribe, comment below stating such so I can reach out and thank you for supporting the channel.
All content is free...no memberships with all videos available to anyone!
Thanks for your support and ride safe.
Rick
Great video, shop quoted 4 hours or $700 in Australia, with your great video got it done in 2.5, the trimmer wire was the most challenging part but i found running from the instrument cluster to the hole where the clutch clamps and then feeding another wire from the handlebar end to the same clutch hole and taping them together made it easier then the rest was a walk in the park, appreciate the video and time to do it, thank you 👍
Thanks for watching and commenting. I'm glad the video allowed you to save some money. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
I am thinking about getting a 2024 Road Glide, would love if you could make another video for the new bikes.
Thanks for watching and commenting. The 2024 set up is completely different. I have not yet had the opportunity to check out the set ups yet. Hopefully soon. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍
Thanks for a great step by step vid, got mine installed, didn’t read the Harley instructions!!
Thanks for watching and I'm glad to hear the video helped you out. Thar is what the channel is all about. 👊✌️👍
Heated grips is a must for me. Great video
Thanks Kelly for watching and commenting. Heated grips are a game changer for those cold day rides. ✌️👊👍
hello from France, an essential accessory this season
Yes indeed. Thanks for watching and commenting. Ride safe and enjoy. ✌️👊👍
Great video. I have heated grips purchased and ready to install on my 23 Road Glide when it warm up some.
Thanks Terry for watching and commenting. This video will definitely help you get those grips installed. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👍👊
@@HDVIBE Yup I am a scribbler. Love your install videos.
@terrymorning3216 Thank you. 👍
my ultra classic limited came with them but in case i need to replace them this is a good video
Thanks for watching and commenting. Your comment is on point. I have followed this exact process in helping a friend replace his heated grips on his ultra limited. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍
NEW SUBSCRIBER! I'm currently looking at a 2023 road glide st and I really like it. Everything I didn't like about it you fixed! I might have to go get it tomorrow 😂. I'd like to learn how to work on it myself but I'm uncomfortable working on 2 wheels without supervision. I think I'll have a shop make all alterations. That makes me sad.
Thanks for watching, commenting and subscribing. Many of the upgrades are not too difficult to do yourself but I understand your concern. This channel is all about helping viewers do the upgrades themselves by watching me do them in a step by step manner. I look forward to seeing your comments on other and future videos. Thanks for your support and ride safe. 👍👊✌️
Great video and new subscriber! I will be ordering these soon to install on my 2019 Road Glide Ultra. Thanks for the instructions!
Thank you for watching, commenting and subscribing. You are welcome. I look forward to seeing your comments on other and future videos. Thanks for your support and ride safe. 👊👍✌️
@@HDVIBE I removed my instrument cluster. My 2019 Road Glide Ultra has auxiliary driving lamps, so there is a large auxiliary connector on the left side of the cluster for the switch. The right side of the cluster also has a large auxiliary plug going into a dummy plug.
I found the black and white wired connector, but there is no purple and black wired connector like you showed. However, the large auxiliary connector in the dummy plug on the right does had purple and black wires along with others, and they are 12V hot with the ignition on.
Are these the wires for the throttle side you mentioned? I looked at all of the wire harnesses coming out of the handlebars, and I don’t see any wiring that’s not already going to other plugs.
@HankHill757 The plugs should all be inside where the guages go. You would not use any of the plugs from the dummie buttons. Those are for other accessories. Sometimes you really need to dig around to find them. 👍
@@HDVIBE Yeah, I really searched based on your original instructions. I’m going to pull it apart again along with the right grip and test do a continuity test from the plug on the right grip to various wires coming out of the handlebar harnesses to try to determine which ones they are.
@@HDVIBE I pulled everything apart and unplugged all the connectors under the gauge cluster area. Only found the black/white wire connector as before.
I removed the right handgrip and checked the continuity of the two heater wire holes. They are the black/ white wire connector.
Looks like I’ll probably have to buy the harness with the heated grips so I can wire them for power.
You make note of the hydrolic system for the brakes, but there are alot of harleys with hydrolic clutch.
Thanks James for watching and commenting. I appreciate your input on the topic. Your point is well taken. Since I have cable clutches on my bikes, I failed to mention the hydraulic clutch situation. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👊✌️👍
i subscribed
Thanks Dale for watching, commenting and subscribing. I appreciate the support. I look forward to seeing your comments on other and future videos. Ride safe and enjoy. 👊✌️👍
Great video and it helped. What about the extra harness Harley says you need to install
Thanks for watching and commenting. I believe I covered that in the video, but, as seen in the video, no need for the harness the Harley instructions stated. The only situation which may necessitate the harness is if you have other accessories using the power source that is used for the heated grips. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. 👍👊✌️
@@HDVIBE Oh, I didn’t see that part but really appreciate the response! Thank you
@michaelallen345 You are welcome. This is why I do these videos...to help others do these type of upgrades. 👊
I just removed mine (30 min ago) as I am installing new KST bars soon. My 2021 CVO Road Glide Kahuna heated Grips never worked. Now when I reassemble them (getting Locked and Loaded spearheads) from KST so I’ll double check the connections and especially the throttle side.
Thanks!!
Thanks Don for watching and commenting. Hopefully you can get them working. The other thing to look for is any nicks in the wiring on the grips. The throttle side is another area that can cause problems. Sometimes the plug will work its way out when riding and then the grips won't work. Thanks fir your support to the channel. ✌️👊👍
@@HDVIBEyou have some great videos. I appreciate how detailed and informative you are.
I’m adding 14” bars so I purchased the Fat Baggers 4” clutch cable extension and replacing the plastic adjuster with the metal one. Hopefully that all goes well😂
@dondasher58 Thank you so much for the kind words. Good luck with the project. That is one I have not tackled...yet. ✌️👊👍
@HDVIBE do you think someone could get by with just pulling that left grip off and the wires through the bars for taking heated grips off (after disconnecting under front fairing)? Street Glide, if it matters...I want to transfer them to another bike.
Thanks for watching and commenting. That should work. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👍👊
Good video. My 2016 RG Ultra only had the black and white factory wire under the speedo/tach. So, I believe I will need the additional wiring kit.. Do you have a video showing how to install that?
Thanks for watching and commenting. I do believe the RG ultras do require the additional harness. Unfortunately I do not have a video showing that installation. I have heard from other viewers with the RG Ultra that it's not to difficult. Just follow the instructions supplied with the harness and hopefully it will be straight forward. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍
@@HDVIBE Actually, i pulled the fairing off, and found the plug, with the insert in it, near the right turn signal plug. I ended up cutting it off and soldering the 20" grip kit connector, using heat shrink tubing, to it. I checked with an ohmmeter and found that the plug i had found also goes to the cigarette lighter fitting on the left side of the fairing, from the riders view.. It. Works well. It's too bad HD isn't consistent with their wiring. Thanks for your help.
@6CCORVETTEMAN Glad it worked out for you. ✌️👊👍
👍
Thanks Scott for joining the premiere. Make to save this video for future reference. ✌️👊👍
Why did you take the ignition out again? Think I missed that part.
So I could easily get the dash panel out and off in order to get to the opening in the handle bars where the wires come through.
I'm trying to install the heated grips on my 23 tri-glide. I can't seem to find the powered accessory plug on the right side. What color are those wires and did you find it under or over the radio platform? I did comment prior on the original video.
I think I located it. Is it a black wire along with a purple one? If so you are correct it is very well hidden.
The plug on the right side as your looking at the bike are black and red. It will have a dummy plug in it as well. Mine was hard to find but as shown, I found it. If you can't find it, it maybe that the tri Glide uses that plug for another accessory. So in that case you may need to add the power harness harley notes in the instructions. 👊✌️👍
@davidmaxwell7029 Sounds like you found it. I think on my Road Glide it was purple and black. If it had the dummy plug in it...that is it.
On the Street glide, does the ignition key just click back in?
Thanks for watching and commenting. Yes put it back in just as you took it out and it will lock it. Then will turn just as normal. The key is putting back it just as you took it out or the tumblers will get out of alignment. If you are already a subscriber to the channel...thank you. If you haven't yet subscribed to the channel I'd be honored if you'd consider doing so. Thanks for your support and ride safe. ✌️👊👍
@HDVIBE Thanks. I just did the installation. I didn't need to remove the ignition switch. Moving the fairing forward gave me enough room.
@antsadowski Awesome. Glad that worked out for you. Heated grips are a game changer. I don't plan to ever ride a bike without them. ✌️👊👍
You skipped over some critical parts.
Thanks for watching and commenting. I'm curious as to what you feel that was critical that was skipped. The installations shown on both bikes were recorded just as I did them. All parts used were linked in the description as well. Thanks for your support and ride safe. ✌️👊👍
I thought you've already showed 3 videos on the same thing.. 😢
Thanks for watching and commenting. I have showed the installs on both bikes separately and thought it would be helpful to have it all packed into one video cover the batwing and fixed fairing installs. Thanks for your support and ride safe. ✌️👊👍
@HDVIBE yes sir. I was just making sure I wasn't tripping lol I thought you had made the videos lol
👍