In depth Dremel Versa Flame review
Vložit
- čas přidán 22. 07. 2024
- #dremel #torch #review
I love this little torch made by dremel! Please comment, like, and subscribe!
amzn.to/3LerhMd (AMAZON)
As an Amazon Affiliate Associate I earn from qualifying purchases.
This Video is for entertainment purposes only.
Thank you for watching my review! Please help me reach my goal of 1000 subscribers 🎉🎉🎉 thank you again for watching!
Thanks to you all I recently reached my goal of 500 subscribers in January 2024!
Wow, thank you so much! I struggled to get this pesky little thing to light for ages. I was beginning to think it was faulty then I watched your review and about the air hole needing to be open. I don't know if I'd have ever succeeded without your video.
Once again, many thanks!
Thanks for watching! I struggled a long time with that too. Was about to return it lol.
Thank you for making my day. I was looking for this review.
I’m glad you liked it! Thanks for watching!
video was exellent,i bought one ,and could not get it to work,filled up with gas ,and that was it ,for few hours,watch your video,and boom,got it going ,thanks for upload video,i use it for rc cars,solder big cables,heat shrink after,works well,tried electric solder irons,but big cables,suck the heat out of the iron,cold,i too,tried plumb torch,was hot ,but big head head,melt wire,hard control flame,but this is good for big cables,rc wiring
Sorry for such a late response! I just became very active on CZcams again, and definitely plan to stay. Being how small it is, it certainly has limitations. None the less a great torch. Thanks so much for watching!
Thank you for the explanation 😀
Thank you so much for watching!
Thank you so much, instructions were not clear but your video was :) Brill.
Thanks. I think lol.
Thanks for this video.
Thanks for watching! P
Good tutorial. I ordered one of these.
Sorry for such a late response! I’ve recently became very active on CZcams again. Thanks for watching and hope it worked great for you!
@@jacksonworkshop Thanks and it works great.
Great review definitely a deal breaker for
Me! I’m surprised you aren’t sponsored!!
Lmao McKenna
How do I get the torch to reach maximum heat ca 1200 D Celcius?
It won´t even melt silver at ca 900 Ceclcius, even when using the extender.
You gotta open the vent so the hole is completely see through! Thanks for watching/commenting
Would this be strong enough to melt silver? I need a propane torch for making silver coin rings.
I wish I could give you a accurate response, but I’m unsure
thanks man
Thanks so much for watching
thank you very much!! What is that little yellow box?
This has bothered me for a while….apparently it’s a sponge? What it’s for, is beyond me.thanks so much for watching! Please subscribe! Merry Christmas!
It's for cleaning soldering tip. You wet the yellow sponge and clean tip by passing with tip on the surface of wet sponge.
I have a dremel versa used it many times, , but now it won't ignite...it's full of butane to, any ideas on how to fix this?
Unfortunately I haven’t really messed with the versa. I wish I could help 🥺
Clean the nozzle as it needs good electrical contact to light
I've just bought dremel torch and bought online propane-butane Ronson's cans 300ml. Can I use it with dremel or I wasted money for 5 cans of propane-butane? Can't find informations about using propane-butane with dremel torch anywhere...
Any off brand cans of butane work! I use off brand all the time. Thank you for watching!
@@jacksonworkshop so, if i uderstand correctly (english is not my language): there is no difference between butane or propan-butane mix, right?
@@joannachekowska3216 forgive me I just saw the propane part....to be honest I’m unsure. I just checked the ones I use and it only says butane
@@jacksonworkshop The case here is that every substance has CAS number which tells you what is that substance. When i checked CAS nr "68476-85-7" this one which I bought: www.stephensons.com/ronson-butane-gas-lighter-refill.html it showed me that it's not pure butane only mix of propane and butane. Now I only guess, that in english commonly it is called 'butane torch' and ' butane gas' but in fact it's mix of this two: propane and butane. So translation from english to my language is not good enough. Thank you for help! Hugs :)
@@jacksonworkshop btw you can check CAS number on your "butane can"...
I need for brass and silver brazing
Amazon sells them or most big stores!
Hi, can I melt 1 or 3 gr of gold with this torch? Thanks
Unfortunately I have never attempted using it with gold
@@jacksonworkshop ok, if this kind of torch can reach 1100/1200 celcius degrees i think it could melt it.
long tube could be good for getting bubbles outvote resin
I’m sure it could! Thanks for commenting and watching
Soldering home electric wires is a pain - I'll get one of these.
Yes they definitely are! I’m sure this could get the job done!
Is it still working good?
Still works great
Can you cut metal with it?
If it does I wouldn’t know how!
Depends on the metal i guess....
Probably not tho as it doesnt use an oxygene cutting flame...just simple butane which reaches about 1200 celsius.
Perhaps enough to melt some metals but i doubt you can effectively cut anything with it.
Thanks Man! I was puzzeled bui the user manual. It is not clear att alll!!!! Could not turn it on!! whahahaha
Turning it on was a struggle for me at first too. Lol. Thanks for watching
so when it's empty you don't have to go and buy a whole new can of propane, you just have to go and buy a whole new can of butane?
Yep! All you need is butane cans for refills
lol. good point. either way you need to buy more!
Thats one of those mini torch like lowes sells. Drop it and porcelain in nose falls out. They suck
I did not know that, luckily it hasn’t happened for me! Thanks for watching
Very informative
How I can buy in India?
Not entirely sure I got mine off Amazon
It's funny you'd ask an American. Lol
$55.00 Now 2024
Does it really cost this now? Thanks for watching and commenting!
Jeff
6:23 - 6:33 ... so are you saying that if you WERE SPONSORED by Dremel, you'd give a dishonest and biased review?
No I would give a honest review regardless. But some people like hearing there is no motive behind a review. I’ll always give honesty. Thanks so much for watching!
It would be a better review if you had used and demonstrated all the tips, not everyone will want to use it just to burn things. Please read the instructions at least once so you can at least install the tips properly. No, I probably won't buy one, I like the better model that is pen shaped.
Maybe check out another video of people using it on different things lol none the less thanks for watching I think....
wow what a great review, whoever doesn’t think it’s a review probably shouldn’t look up the title of this video.
This is an awful review. Basically nothing more than an unboxing with only a single demonstration of function (and a very unchallenging function. It can torch wood... yay). There's so much more that could have tested. But whatever.
Not a review as you did not state any opinions about the product.
Thanks for watching!
Sorry, but it's not in depth at all.
Thanks lol