[0001] Xtool x100 pro 2 - Nissan Frontier
Vložit
- čas přidán 5. 08. 2020
- In this video, I am using the Xtool x100pro2. I had cut a new key for a Nissan Frontier 2018 and didn't follow the basic rule of program all keys. So I had 2 original keys the would operate everything except starting after the program and this is correcting the problem to have 3 functional keys. If this helps or you liked it, please hit those like and sub buttons.
JenkinsLocks.com
the two different codes apply to two year ranges, where the bcm pin converts via encryption to either, but only one code will work with either the old or new immo systems. which is why it just generates both. old = 2003-2009, new = 2009+.
it doesn't generate new pin codes every time. if it does, there's something screwy.
can this tool do the nissan 20 digit pin ?
I have a autel 508 also needing to program ignition key for a 12 frontier is it the same procedure or is it different immo scanner I have to use for trans keys
I've never had an autel, but from my experience, all nissans with the NI04T key tend to be the same...when you start to program, all keys are erased and you must program all keys (existing and new) at the same time. The procedure is pretty much identical between my xtool prodpad 3 and my topdon pro.
Does it works with juke?
Nissan Juke? Yes.
@@JenkinsLocks thanks, appreciate it
No it doesn't work to juke , xtrail or qashqai
I try it.
I believe its pronounced as Stool
I have the Xtool X100 Pro3(it looks the exact same as the Pro3) I can program the keys but the red immobilizer key icon stays on. Any idea why?
It stays on after the is programmed, and you start the vehicle?
@@JenkinsLocks yes it will drive even. After 2-3 starts it needs to be reprogrammed.
@Flyinghawaiian1977 that wouldnt be a problem with the programmer. I'd try a different key or if you've done that, check the ignition cylinder and security module...start simple with checking the wiring/connectors. Check for loose connections like grounds.
@@JenkinsLocks ok I will do that. Thanks for getting back to me so quickly.
Hey I got the same one so how do it program keys 2014 in up?
Can it actually reset miles?
Yes, but it depends on the car model
Like Met said, it depends on the vehicle. I will try to do a video this weekend on the procedure.
For wich car do you need it ?
Or type of brands
Dosen't support nissan xtrail and qashqai
I don't think the xtrail was sold in the US and the qashqai is branded as rogue sport in the US. I don't have this scanner anymore so I can't check, but you may have to select a different region.
chucked it in the bin
No disagreement from me. This was the programmer I could afford starting out, but quickly outgrew it.
this shit ruined my tune and i have to re-map the ECU. No respond from Xtool...
Can you gift this to me please?
Lol, I no longer have this one. I'm now using a combination of xtool x100 pad3 and tc-100 with a few more to add soon.
@@JenkinsLocks I really need this, I can't buy it because I can't afford it, thank you
Cuál es el Nissan Frontier jajajajajaja
Nissan Navara