Clutch Removal & Belt Inspection - HISUN 550cc UTV Engine
Vložit
- čas přidán 24. 11. 2019
- In this tutorial, you will be walked through the process to remove and inspect the 3-piece clutch and belt on a 550cc engine. Be sure to follow along thoroughly and pay attention to the details.
- Auta a dopravní prostředky
Great!more videos please!) thank you very much!
How did you remove the cover under the seat?
In your experience, have you seen the back half of primary clutch that has cooling fins on it....have you seen it run against the wet clutch housing before? I bought a 2nd hand HiSun Cub Cadet Challenger 750cc UTV knowing it had an issue. Was told the wet clutch and one way bearing had been replaced. Something I noticed on the back half of the clutch was that it has no splines on the fan part? Is that splined part pressed into it from factory? Thanks in advance for any helpful information
How did you get the plastic covers off?
How often should we be looking in there..?
How do you drain the fuel tank
Can’t remove primary , secondary and fluid clutches as the shafts just spin in both directions
What they don't tel you that you'll need to remove the box and the majority of the cab since the engine is mostly covered on the newer ones and buried under the seat/cab.
Exactly
That's what I came to say. Oh you have all that room nope you have a million things to remove first. -_-
Anyone have the width and length of a Massimo T-Boss 550 cvt belt or an aftermarket part #? I'm not about to pay over $200 for a spare belt from the dealer.