Sizzix: Tips & Tricks for Using the Sizzix Big Shot Switch Plus, Part 2

Sdílet
Vložit
  • čas přidán 13. 07. 2024
  • Join Sizzix Designer Jess for the next episode of our Tips & Tricks series, all focused on the new Sizzix Big Shot Switch Plus machine! You will be crafting like a pro after this series ✂
    Let us know if you have any other queries, you want us to explore within this series! 👇
    Time Stamps:
    0:00 - Sizzix Big Shot Switch Plus Tips & Tricks Series Intro
    0:36 - Tip 1: Sizzix Chrome Precision Base Plate with Big Shot Switch Plus & intricate die cutting
    2:30 - Tip 2: Using smaller platforms & cutting plates from other Sizzix machines
    4:18 - Tip 3: Die cutting multiple die sets at once
    7:04 - Tip 4: Using the Big Shot Switch Plus for tool storage
    Add the Switch to your wish list now 👇
    US: bit.ly/3IHnt2a
    UK / Europe: bit.ly/3DeBFyU
    🔔 Don’t forget to click subscribe so you never miss the latest Sizzix CZcams content! 🤩
    #Crafts #Sizzix #Papercrafting
    North, Central and South America:
    Sizzix® Big Shot™ Machine: www.sizzix.com/660425/sizzix-...
    Sizzix® Big Shot™ Foldaway Machine: www.sizzix.com/662500/sizzix-...
    UK, Europe and Rest of the World:
    Sizzix® Big Shot™ Switch Plus Machine & Starter Kit: www.sizzix.co.uk/663650/sizzi...
    Sizzix® Big Shot™ Machine: www.sizzix.co.uk/660200/sizzi...
    Sizzix® Big Shot™ Foldaway Machine Starter Kit: www.sizzix.co.uk/662220/sizzi...
    Sizzix® Big Shot™ Foldaway Machine Inspired By Tim Holtz: www.sizzix.co.uk/665305/sizzi...
    Don't forget you can register your new machines on the Sizzix website and receive another 2 years warranty! 😊
    Register your machine here 👇
    North, Central and South America: www.sizzix.com/warranties
    UK, Europe and Rest of the World: www.sizzix.co.uk/warranties
    ✨ About Sizzix ✨
    From scrapbooking, cardmaking and papercrafting to fashion, quilting and home décor, and Education, Sizzix provides people of all ages and abilities the opportunity to express themselves in countless new ways.
    Don’t miss out on any updates across our channels 💌
    Sizzix Blog: www.sizzix.com/blog/
    Facebook: / sizzixlifestyle
    Instagram: / sizzix
    Pinterest: / sizzix
    Twitter: / sizzix_official
  • Jak na to + styl

Komentáře • 126

  • @karenreeves3958
    @karenreeves3958 Před 2 lety +1

    Thank you. I was wondering also about using the precision base plate in the Switch & you just answered it.

    • @sizzix
      @sizzix  Před 2 lety

      Great! Please let us know if you have any further questions 😊 - Abbie, Sizzix

  • @JoanOrloffDK
    @JoanOrloffDK Před 2 lety +1

    Great tips and tricks ❤ thanks for sharing and happy crafting Hugs xx

  • @hildaburton9255
    @hildaburton9255 Před 8 měsíci +1

    More great tips. Thanks

  • @carolstella6776
    @carolstella6776 Před 4 měsíci +2

    Does it really matter if the cutting edge of the dies are up or down? Also, what about a magnetic plate?

  • @dianawilson9659
    @dianawilson9659 Před 2 lety

    Love it!!!

  • @ginacox7867
    @ginacox7867 Před 9 měsíci

    Very helpful, thanks heaps 🎉

  • @vivaciousmimi
    @vivaciousmimi Před rokem

    Very helpful!

  • @terrilynn1771
    @terrilynn1771 Před 2 lety +1

    Great video ….i ordered my switch ..waiting for it to to be delivered …

  • @Ronda-IreneBergeron-xm8xy
    @Ronda-IreneBergeron-xm8xy Před 5 měsíci

    My dream machine. I have a manual big shot but getting too old to crank now.

  • @kathleenstadler3106
    @kathleenstadler3106 Před 2 lety +1

    Great quick video! Reminded to order the large storage envelopes and magnet sheets for the lovely dies included with this fantastic machine. Thanks for the tips! 😊

  • @BerniBernsify
    @BerniBernsify Před 2 lety +1

    Awesome I used the chrome precision plate in my Switch a few days ago 😃 I 😍 the Switch. Thanks for the tips video

  • @carolscott8062
    @carolscott8062 Před 6 měsíci

    Hello, just got my Switch for Christmas and was allowed to use it early, yay! Can a metal shim be used with the Switch?

  • @lorykerman7103
    @lorykerman7103 Před rokem

    Hi, I have been using my new machine for a month now, and the acrilic plate that goes on the top os curves even though I change it withe the one below. How can I get ir straight again?

  • @melodypatrick7806
    @melodypatrick7806 Před rokem

    Can you run Accuquilt dies through the switch like you can the big shot plus?

  • @catherinetorrey2336
    @catherinetorrey2336 Před 2 měsíci

    Can i use my steel or metal dies in the switch plus or can I only use sizzix dies.

  • @fereshteht4618
    @fereshteht4618 Před rokem

    Can I use a heartfelt creation mould?

  • @brendakuder2957
    @brendakuder2957 Před měsícem

    I just got the Switch machine and it came with a clear A plate. Is this intended to be able to use instead of the A adapter plate?

  • @elinarubin
    @elinarubin Před 3 měsíci

    Can fabric and fabrics lined with fusible interfacing be cut using this machine?

  • @njofei
    @njofei Před rokem

    what is the name of the smaller base plate, I am trying to find one that would work with my switch ?

  • @reginamalcolm622
    @reginamalcolm622 Před rokem

    Can you cut vinyl with that machine

  • @barbaraharrold5361
    @barbaraharrold5361 Před rokem

    What about the biggie dies? This is wonderful that you are showing us this machine:) tfs stay safe and God Bless:)

    • @sizzix
      @sizzix  Před rokem +1

      Yes the Bigz dies are compatible with the Switch. We would just say to take into consideration the thickness of the material you'd be using with the Bigz and this machine 🙂

    • @barbaraharrold5361
      @barbaraharrold5361 Před rokem

      @@sizzix is there a video on how to run it through the machine? I only cut paper and maybe felt. Ty:)

    • @sizzix
      @sizzix  Před rokem +1

      @@barbaraharrold5361 You can check out our first Switch tips and tricks video here czcams.com/video/bhTnqOCh1PA/video.html :)

  • @annetaylor6587
    @annetaylor6587 Před 2 lety

    Thanks for the great tips. Is it possible to fix the light on my power switch? I love my machine

    • @sizzix
      @sizzix  Před 2 lety

      Hi Anne, Please contact our customer service team directly and they will be able to look into this for you.
      You can contact them here in the US: www.sizzix.com/contact/ or here in the UK & Europe: www.sizzix.co.uk/contact/ Thank you 😊

    • @annetaylor6587
      @annetaylor6587 Před 2 lety +1

      @@sizzix Thank you, I tried this, but they weren't able to help me. They suggested a replacement, but I didn't buy it from Sizzix. Also, the machine works well and I love it

  • @bonniemiller1819
    @bonniemiller1819 Před 2 lety +2

    Will the precision plate come in a larger size to cover the cutting plates for switch

    • @sizzix
      @sizzix  Před 2 lety

      Hello, you will need to keep updated with our launches to see if we bring any of these out! 😁 We of course will do a video if we do bring out any other accessories for the Switch - Abbie, Sizzix

  • @annihilator45
    @annihilator45 Před 2 lety +2

    I would like to know if you can use the magnetic platform with the switch?

    • @sizzix
      @sizzix  Před 2 lety +2

      Hello, Yes you can! - Abbie, Sizzix

  • @louisejones3080
    @louisejones3080 Před rokem +1

    why not make the storage big enough to keep the die brush in?

  • @helengaul3030
    @helengaul3030 Před 2 lety +3

    would like to see more tips on the switch machine especially partial die cutting.

    • @sizzix
      @sizzix  Před 2 lety

      Thanks for your feedback Helen! ☺ - Abbie, Sizzix

  • @henryiia
    @henryiia Před rokem

    Is this auto volt? 110v-240v?

  • @kawaiiyokaii6360
    @kawaiiyokaii6360 Před rokem

    So I don’t need to use the chrome baseplate with my intricate dies, unless I feel like it needs more pressure? Is that what I’m hearing? I want to start cutting with my machine as it arrived in the post today but I’m worried I won’t be able to use it without that baseplate

    • @sizzix
      @sizzix  Před rokem

      That's correct, the pressure of the Switch can handle intricate dies, if your die is very intricate you could try a chrome precision base plate but you should try without first 😊

  • @lynettepaton381
    @lynettepaton381 Před rokem

    Can I use the extended magic mat/ platform with the sizzix switch machine?

    • @sizzix
      @sizzix  Před rokem

      Yes the Extended Multipurpose Platform and Extended Platform work with the Switch machine. You can see which accessories are compatible with our machines here www.sizzix.co.uk/media/uploads/cms/uk/Compatibility-Charts/Machine_Accessory_Compatability.pdf 🙂

  • @TuggerAbbey
    @TuggerAbbey Před 2 lety +1

    When will you come out with a magnetic platform for dies?

    • @sizzix
      @sizzix  Před 2 lety

      Hi Yvonne, we have a Magnetic Platform for wafer thin dies on our websites that hold Thinlits, Framelits and other wafer-thin, dies securely in place during cutting 😊 - Steph, Sizzix

  • @jokevanmourik5977
    @jokevanmourik5977 Před 2 lety +6

    Can I use the magnetic platform with the Sizzix Big Shot Plus Switch?

    • @annihilator45
      @annihilator45 Před 2 lety

      I am asking this also!

    • @sizzix
      @sizzix  Před 2 lety +5

      Hello, Yes you can! - Abbie, Sizzix

  • @CouzCat
    @CouzCat Před 2 lety

    Will Sizzix be making sticky grid sheets sized for this machine?

    • @sizzix
      @sizzix  Před 2 lety

      Hello, you will need to keep updated with our launches to see if we bring any of these out! 😁 We of course will do a video if we do bring out any other accessories for the Switch - Abbie, Sizzix

  • @miray9259
    @miray9259 Před 2 lety +1

    Diger modelde ki plaka ve yükselticiler bu makina da kullanılabilir mi

    • @sizzix
      @sizzix  Před 2 lety

      Bu makineyle hangi plakaların ve aksesuarların kullanılabileceğini görmek için uyumluluk listemize bakın -www.sizzix.co.uk/media/uploads/cms/uk/Compatibility-Charts/Machine_Accessory_Compatability.pdf 😊 - Steph, Sizzix

  • @Marie-qx4hz
    @Marie-qx4hz Před 2 lety +1

    I’m in Western Australia where can I buy replacement plates for the A4 switch machine

    • @sizzix
      @sizzix  Před 2 lety

      Hi Marie, You can check your local stores here: sizzix.co.uk/gmapstrlocator 😀

  • @eirenebrodie5861
    @eirenebrodie5861 Před 2 lety +1

    Can u use the magnetic plate in the machine also?

    • @sizzix
      @sizzix  Před 2 lety +1

      Hi Eirene, Yes you can! - Abbie, Sizzix

  • @junealderman1055
    @junealderman1055 Před rokem

    Hi Abbi, I have recently had the new Bigshot Switch and everywhere says dont use Cromb Pression plate in it, buy your saying yes we can, I would love one, but Im concerned as they say it will damage the machine, please put my mind at rest .Tthank you x

  • @user-le3vv6kb4e
    @user-le3vv6kb4e Před 23 dny

    Could I use some of the templates to cut fabric for quilting

    • @sizzix
      @sizzix  Před 20 dny

      We recommend our Bigz Dies for cutting fabric but these can be used in the Big Shot Switch as well :)

  • @cecilialefeuvre9610
    @cecilialefeuvre9610 Před 2 lety +2

    On both tips and tricks videos, you both say not to use reverse button once the platform has gone through, but it might be helpful to know why. Could you fill us in on that?

    • @sizzix
      @sizzix  Před 2 lety +1

      Hi Cecilia! There are sensors inside the machine, meaning that if the sandwich passes these they will not be able to come back through the machine. Hope this helps! 😊 - Abbie, Sizzix

    • @catherinetorrey2336
      @catherinetorrey2336 Před 2 měsíci

      I was told by a authorized Sizziz dealer that using the reverse button after the sandwich completely passes through , it could damage the machine or ruin it.

  • @gloriagarnand6882
    @gloriagarnand6882 Před 11 měsíci

    How do I cut sizzlits? And can I cut quickutz dies with this machine?

    • @sizzix
      @sizzix  Před 11 měsíci

      Hello! Yes you can use Sizzlits in the Big Shot Switch Plus. It would be the same sandwich as Thinlits and the instructions for this are in the booklet sold with the Switch Machine. As for Quickutz - You would have to check with the manufacturer to see if it's compatible with this machine. Hope that helps!

  • @rhirma1
    @rhirma1 Před 4 měsíci

    What do I do if the big shot plus gets stuck?

  • @diannededominici7531
    @diannededominici7531 Před rokem +1

    Can we use the big shot plus magnetic platform?

  • @cococho2767
    @cococho2767 Před 5 měsíci

    Cool machine, and useful tips. However, for such expensive tool and accessories, you should provide protective film for cutting pads. It is clear that they are already damaged, and they are not cheap to buy extra. Your engeniers should design it with durable protective foil or smth similar. Also, why do not you include cutting pads in your Boutique Sizzix embosing machine?? I am wondering are there any cutting pads that can be bought for this embosing

    • @sizzix
      @sizzix  Před 5 měsíci

      The cutting pads will mark over time but they will continue to work perfectly well! They are, however, a consumable item and will eventually need replacing but we have plenty of videos that share tips on how to get the best from them and to make them last longer. Any protective film will still get marked due to the amount of pressure from the roller but again, this doesn't ruin them, they will still work just fine.

  • @lajkitty
    @lajkitty Před rokem

    How do I use the Spellbinders Nesting Dies? I have used the recommended plates, but they will not go through my machine. I've only had my Switch a few weeks, & this problem is driving me crazy! HELP!!!

    • @sizzix
      @sizzix  Před rokem

      Hi Linda, unfortunately we can't advise on the use of competitor dies in our machines. If you wish to use other brands in any of the Sizzix systems we would advise checking with the manufacturer for further feedback 🙂

  • @brianbean3282
    @brianbean3282 Před 2 lety

    My name is Trish although my account says Brian. (My hubby) my question is regarding embossing mats. Will a larger embossing mat be coming out so I can emboss with some of my larger stencils? Also a larger embossing plate?

    • @sizzix
      @sizzix  Před 2 lety

      Hi Trish, our Part 1 of the Switch Tips & Tricks series explored embossing! You will need to keep updated with our launches to see if we bring any of these out! 😁 - Abbie, Sizzix

  • @deanahayesdeanah3278
    @deanahayesdeanah3278 Před 2 lety

    On the die set of the florals, what is the rectangle piece?

    • @mumma_of_one8511
      @mumma_of_one8511 Před 2 lety

      It has me baffled as well.

    • @sizzix
      @sizzix  Před 2 lety

      Hi Deana, It is for the centre of the flowers! Pete shows you in this video how to use it at around 18:07 😊 czcams.com/video/UYHXksw9TB8/video.html

  • @dianescaroni5935
    @dianescaroni5935 Před 2 lety +1

    My plates have really buckled love the machine though

    • @sizzix
      @sizzix  Před 2 lety

      Hi Diane, this is completely normal for the plates and eventually over time they will need replacing. However to help, try alternating the plates 🙂 - Steph, Sizzix

  • @sallybarker7165
    @sallybarker7165 Před 2 lety +1

    Please can you advise me about the cutting plates? I have had my Switch for about three months and I’m on my fourth set of plates. I know they are supposed to mark and even bend but all the former marks are coming out onto my card stock. This can’t be right surely?

    • @sizzix
      @sizzix  Před 2 lety +1

      Hi Sally! You could try and use a buffer card shim to help take the impact from the plates and protect the card stock. Alternatively, you could also take the die-cut and place it in a blank folded card and run it back though the machine, this helps to smooth out the surface of the card. Hope this helps! 😊 - Steph, Sizzix

    • @sallybarker7165
      @sallybarker7165 Před 2 lety

      @@sizzix thank you I will try.

    • @NancyLynn
      @NancyLynn Před 2 lety +4

      Yes Sally, I use a piece of scrap paper, basically photocopy paper, and place it on the plate that is scratched and then my CS and die down of course. That way it protects the CS from getting scratch marks. If my plates are really bad, I sometimes will place another sheet on top of the die that's face down. And remember, to always rotate the plate that has all the scratch marks and warping, including turning it from front to back. If you start doing this as soon as you start using the plates, the warping is minimized. Hope that helps.

    • @sallybarker7165
      @sallybarker7165 Před 2 lety

      @@NancyLynn thank you.

  • @miray9259
    @miray9259 Před 2 lety +1

    Bu makina ile almam gereken parçalar nelerdir acil cevap verebilir misiniz

    • @sizzix
      @sizzix  Před 2 lety

      Switch Plus, 24 ince ışıklı kalıp seti, 3-D Dokulu İzlenimler Kabartma Klasörü, temel Kesme Pedleri ve bir Platform içeren bir başlangıç ​​kiti ile birlikte gelir 😊 - Steph, Sizzix

  • @lindadesgroseilliers17

    I'm on my second Big Shot Switch Plus, first one was returned to Sizzix after I explained my problem. I'm reading over the "booklet" that comes with the machine because I want to cut with a Impresslits die. The sandwich shows (bottom to top) Big Shot Switch Plus Platform, Adapter Pad B, a cutting pad, the embossing folder, and another cutting pad. The instructions for the 3D folders mentions the same Adapter Pad B but only 1 cutting pad (I expected that, most machines only use 1 cutting pad for 3D embossing folders. MY QUESTION: What is the Adapter Pad B? I received the Adapter Pad A with my machines, but no Adapter Pad B. What is it for, is it interchangeable with Adapter Pad A? I don't want to take a chance of breaking this machine. TIA

    • @sizzix
      @sizzix  Před rokem

      Hey Linda, Sorry to hear you're experiences issues with your machine. Please can you contact our customer service team, they will be happy able to help you with Adapter b. Thanks!☺️

    • @lindadesgroseilliers17
      @lindadesgroseilliers17 Před rokem

      @@sizzix Thanks. I've been in touch with Luke and he did some research. The B adaptor is NOT needed with the switch. The sandwich for the Impresslets is base plate and two cutting plates if I remember his reply correctly. I did tell him that another person in CZcams comments had the same issue and I suggested that Sizzix issue a statement correcting the incorrect information on the booklet.

  • @bronwynminogue1404
    @bronwynminogue1404 Před 2 lety

    My 3d spellbinders embossing folder did not leave much of an impression. Would I need to add another level?

    • @sizzix
      @sizzix  Před 2 lety +1

      Hi, While other branded dies and embossing folders may be used with the Sizzix Die Cutting and Embossing machines we cannot suggest which sandwiches, or if any shims are required for the perfect cut. We can however share the best ways to cut with Sizzix technologies and you can find our compatibility table on the Sizzix website 🙂 - Abbie, Sizzix

    • @NancyLynn
      @NancyLynn Před 2 lety

      Hey Bronwyn....I would try adding a cardstock shim, or 2, to see if that helps first. Just keep playing with the sandwich, slowly increasing the thickness, before say trying to add say an additional plate. I know I had issues with another brand of an electric cutting machine that I have, that was actually 'cutting' the 'embossed' lines in the die instead of 'impressing them'. I ended up having to take out the magnetic shim in the sandwich, and then it worked fine. I hope this helps as I know it can be frustrating. Happy crafting

    • @bronwynminogue1404
      @bronwynminogue1404 Před 2 lety

      Thank you all for your answers for me, which I will try.

  • @brendawise8254
    @brendawise8254 Před 8 měsíci

    Can this one use my fabric dies.

    • @sizzix
      @sizzix  Před 8 měsíci

      Please check out our compatibility charts here to check what kinds of dies and materials work best with your Switch: www.sizzix.com/product-compatibility

    • @brendawise8254
      @brendawise8254 Před 8 měsíci

      Thank You@@sizzix

  • @kellyschudi4581
    @kellyschudi4581 Před 11 měsíci

    Does this machine have a magnetic plate?

    • @sizzix
      @sizzix  Před 11 měsíci

      Hello! It does not come with a magnetic plate as standard but you can purchase our magnetic platforms which will work with it:
      US/Canada: www.sizzix.com/catalogsearch/result/index/?is_product=1&q=magnetic+platform&tag_machine_compatibility=1316
      UK: www.sizzix.co.uk/catalogsearch/result/index/?is_product=1&q=magnetic+platform&tag_machine_compatibility=1316
      Outside of these areas, please speak to your local retailer: www.sizzix.com/gmapstrlocator
      If you'd like to find out more, please see our Sizzix Big Shot Switch Plus hub here: www.sizzix.com/sizzix-switch-machine-overview

  • @uniquecraft-qb3dy
    @uniquecraft-qb3dy Před 9 měsíci

    Salam everyone! what is price? Design working on products name?what is electric machine?

  • @Mary-el3pi
    @Mary-el3pi Před 5 měsíci

    Help! I was using my smaller top plate in the Switch and they are all stuck! I have been able to wrench them out once before when my top acrylic plate was more warped than I thought but these won’t budge! I think that’s what happened today. Can you tell me what to do?

    • @nesyacollings119
      @nesyacollings119 Před 5 měsíci

      Curious on this question and the answer. Did you use just a smaller top plate, or the whole sandwich?

    • @Mary-el3pi
      @Mary-el3pi Před 5 měsíci +1

      I used my new Magic Mat on the bottom and a too warped acrylic plate on the top. But it’s fine now…I saw a video where someone sent another plate lodged up against the stuck sandwich and it pushed everything through. I did that and it worked! I’m thrilled…and won’t be using my old, beat up warped plates. I have new ones and will use those!

  • @malliganathan4175
    @malliganathan4175 Před rokem

    Can I use bigz dies with this machine?

    • @sizzix
      @sizzix  Před rokem +1

      Yes you can! Check out our dies and materials compatibility chart for more information www.sizzix.co.uk/media/uploads/cms/uk/Compatibility-Charts/Material_Die_and_Machine_Compatabilty.pdf 🙂

  • @RitaPurdue
    @RitaPurdue Před 6 měsíci

    8:04 please help my sizzix swich won’t let me load won’t start I have follow all instructions

    • @sizzix
      @sizzix  Před 6 měsíci

      Please contact our customer service department who will be happy to help you! www.sizzix.com/contact/

  • @jacobadevries1511
    @jacobadevries1511 Před 2 lety

    What can I do, my plates are not straight again?

    • @sizzix
      @sizzix  Před 2 lety

      Hi, Please contact our customer service team directly and they will be able to look into this for you.
      You can contact them here in the US: www.sizzix.com/contact/ or here in the UK & Europe: www.sizzix.co.uk/contact/ Thank you 😊

  • @alisonneet5904
    @alisonneet5904 Před rokem

    I have been having huge issues with my plates warping after only a few cuts which is making me crazy

    • @sizzix
      @sizzix  Před rokem

      Hi Alison, as the plates are consumables this is completely normal. To help make the plates last longer take a look at these CZcams videos: czcams.com/video/Szjo74XwQZU/video.html and czcams.com/video/_QFzEx8ALx8/video.html 🙂

    • @craftydanib
      @craftydanib Před 10 měsíci +1

      I've had a Big Shot for years with barely any warping. The Switch Plus plates warped terribly on the first pass. My cutting plate looks like a giant bubble - nothing even close to what is shown in this video - and not anything like what I'm used to on the Big Shot. It makes it impossible to put more than one item because the cutting plate shifts all over the place when I'm about to feed it through the machine. I'm using dies that are the same dies I use in the Big Shot. The pressure was so great on the first pass that the non-cutting plate has permanent impressions from the top of the die and makes marks on anything I put through it. I'm glad to see that I can use the Big Shot plates in the Switch because I'm just not happy with the big plates. I can use my Big Shot plates for months/years and I don't get any warping. One use of the Switch ones and they are kinda non-functional. They work, but not well. Is there any way to adjust the tightness of the rollers so it's not putting as much pressure on the plates? @@sizzix

  • @RitaPurdue
    @RitaPurdue Před 6 měsíci

    My sizzix swich won’t start when I put plates in please help

    • @sizzix
      @sizzix  Před 6 měsíci

      Please contact our customer service department who will be happy to help you! www.sizzix.com/contact/

  • @n06s87
    @n06s87 Před 2 lety

    I am finding that the machine has so much pressure it actually impresses my dies into my top plate. Is this normal

    • @n06s87
      @n06s87 Před 2 lety

      I have never had this before in any other machine. It doesn’t take any time for my top plate to become misshaped.

    • @rosaliehope5385
      @rosaliehope5385 Před 2 lety

      I find that my plates are warping way faster than when I use my regular big shot (yes i understand the concept of pressure). How can I avoid this and have my plates be long lasting again? I don't want to have to buy plates more frequently. Thanks.

    • @sizzix
      @sizzix  Před 2 lety

      Hi Lorrie, this is completely normal and all our machines will leave marks onto your cutting plates. Yes, with the switch it does happen faster than other machines due to the high amount of pressure - as Rosalie's comment explains. As the plates are a consumable item they will require replacing after a certain amount of use. We can put together a video to talk about this and steps you can take to prevent this as much as you can but unfortunately it will happen ☺ - Abbie, Sizzix

    • @n06s87
      @n06s87 Před 2 lety +1

      @@sizzix no this is different. The non-cutting edge of the dies should not get pressed into the non cutting plate. I spoke with your customer service yesterday and was advised to return it as a defective machine.

    • @eshahaines5558
      @eshahaines5558 Před 2 lety

      Lorrie I have had the same exact experience you are having. Have had manual big shot for years and my plates are still perfectly flat, no huge issues with the top plate having impressions left by my die. I don’t mind abit of warping and understand that that can happen. I contacted sizzix and told them my issue. It’s like a huge divot from the die on my top plate and it’s making the machine pretty unusable. 6 emails back And fourth and fobbed off. Very disappointed.

  • @gaynorrobinson5217
    @gaynorrobinson5217 Před rokem

    I have just recently bought Sizzix switch plus machines and the plastic bass plates are completely unusable they have warped so badly they no longer work in the machine I’ve hardly use them I bought some more and the same thing is happening
    I can’t keep buying £20 worth of plastic base plates i’ve looked at the video and as far as I’m concerned I’m doing exactly the same as your demonstrations i’ve also got an E bosser which I’ve had for years i’ve never had any problem with the plastic base plates

    • @sizzix
      @sizzix  Před rokem

      Hi Gaynor, sorry to hear that this keeps happening with your plates! To help prevent them warping we suggest flipping and alternating the plates over and try placing your dies in a different corner of the plate each time you cut 🙂

    • @gaynorrobinson5217
      @gaynorrobinson5217 Před rokem

      Yes I have done that it makes no difference it’s so badly bent after literally a couple of days use I have sent it back with a letter telling the company to contact the manufacturer as there is something clearly wrong either the machine is too strong for the plastic plates or the plastic plates are inferior product I’m not sure which. thanks for your help🧐

  • @lenalffwallrisagerLena58

    Jeg har købt en maskine fra en forhandler her i Danmark. Elsker min maskine men den skærer så hårdt at det går gennem og op i anden plade samt skuffen går løs og hælder sætter den ind igen og vupti næste gang den bruges det samme der kommer også mærker af afskæring på de steder der ikke er skåret ud hvad kan jeg gøre med min maskine. Ikke til at sende til jer fra Danmark. Jeg er ellers så glad ved den men at den skære så hårdt at den ødelægger skuffe og plader har haft min maskine 1 måned og 20 dage og har brugt 2 gange plader allerede da de bukker så hurtig og h us jeg ikke skifter ødelægger den mine die. Håber i kan hjælpe mig hvad jeg gør. På forhånd tak

    • @sizzix
      @sizzix  Před 2 lety

      Hej! Vi er så kede af dette! Kontakt venligst vores kundeservice-team direkte, og de vil være i stand til at undersøge dette for dig.
      Du kan kontakte dem her i US: www.sizzix.com/contact/
      eller her i UK & Europe: www.sizzix.co.uk/contact/
      Tak skal du have 😊

  • @bobbyebissette2232
    @bobbyebissette2232 Před 10 měsíci

    Unless you have a physical disability, I don't understand the need for an electric cutter. Are people that lazy that they won't crank a handle!?

    • @sizzix
      @sizzix  Před 10 měsíci

      As you said, it's especially helpful for those who find a crank handle difficult but it's really just a personal preference! :)

  • @dizzinese
    @dizzinese Před rokem +1

    I am hoping that through this channel I can get in contact with Sizzix. I have been trying to get a phone number to contact them because the chrome precision base plate as fantastic as the chrome part is the piece that is glued to it. It is adhered to it with SON, some type of adhesive That plates however, it is made out of plastic or some other material is cracking and then it curls like curling ribbon away from the chrome plate while the chrome plate is still fully perfectly flat. I had just done a review on how fantastic these plates were as I had bought two of them and it was a very short time after I did a great review for these, that one by one, both of my plates did the exact same thing that the customers question I was reviewing his complaint was that his was doing the same thing they were cracking, and then curling a part not the chrome part, the plastic with the directions on it that is adhered to the chrome plate. So I hope that Sizzix is monitoring this channel and that they can reach out to me because this is what we have all that on a diet cutting machine have waited for is a plate that will not mark up your card stock particularly mirror, cardstock, and one that will not work. The chrome plate does both of these things and is the answer to our dreams. But the plastic piece that you would hear to. It is a necessary, and had I kept both plates. I would have tried to adhere the chrome to the chrome and see if that would have fix the problem. Unfortunately, I was able to send one back, but it was stuck with the other defective plate so I am hoping to reach out to Sizzix through this channel and get some help with this very well known problem. If this has not happened to you yet, I guarantee you if you die cut enough, it will. It is a true shame because the answer lies within the chrome plate so I hope Sizzix is working on this now and I would like to hear a reply to my comment from Sizzix as far as what is being done for this problem. Thank you.

    • @cheryllambourne2194
      @cheryllambourne2194 Před rokem

      I have that same problem with the chrome plate separating from the black part. Is there any improvement being done to help this Sizzix Switch user?

    • @dizzinese
      @dizzinese Před rokem

      @@cheryllambourne2194 I have had sizzix web address on my desk for months so I can try to get an email out to them and photos and just haven’t had time when I think of it. But I’m going to. Why even need the plastic plate? I wonder if they could weld together a piece of the same chromed metal only thinner on the bottom, or just make it thicker with no plastic piece at all. But they are fantastic for not marking up foil and the chrome doesn’t bend! Just that stupid plastic! Makes you think they never tested this out! I used 2 plates for a short time and that was awesome too. Because it doesn’t get cut up! But they must not care. I posted that commercial so long ago, right after the video and not a single reply- a big company like that! Corporations these days are all about one thing/ it starts with a big fat G!