Flip top tool cart with bearings, Auto locking for flip table, mitre saw and planner thicknesser.
Vložit
- čas přidán 24. 02. 2022
- Moveable flip cart built to double up as support for the mitre saw and also providing in and out feed support for a planner.
- Jak na to + styl
May be the best flip cart I've seen on CZcams
Wow thanks mate.
I just searched flip top miter station, and yours was the only one to pop up. This is the exact idea i had. Great job!
Very inspirational, I have a small, shared workspace and being economical with space is extremely important. Thanks for sharing.
Thanks for watching.
"Like a budgie I could watch this swing around for the rest of the day". Absolutely loved that and the other comments you had in there.
Mate, after watching this I'm now re-planning on my work bench plans to leave out the compound mitre saw and make this instead. Thanks for putting this out there for us all.
Awesome , glad it helped out.
.
“Using my stomach as a third hand” is now a permanent phrase I use to give directions
Very good, thanks for watching.
Stomach leverage and tip toes are a necessity when you are a little shrimp like me. Now that I am 70, even more so.
Beauty. I was wondering how I could use pillow bearings with water pipe. Thanks for the short and sweet vid.
I have watched a ton of these builds. Your idea to lock the top in position is my favorite. Great job
Thanks mate.
I'm just about to build mine, so I've been glued to CZcams. This is by far the best build I've seen. You've fixed all the flaws I've noted in other plans: locking mechanism, stop blocks, in/outfeeds, bearings ... Thanks from a fellow colonial!
Thanks , let us know how your build goes.
agree 100%!
A great combination of tool setup. Really enjoyed the build and your humour is quite interesting 🧐. Thanks for the video and commentary ❤
Thanks champ.
Love the build, and really love the subtle humor. Great job!
Glad you enjoyed it!
Wow, you did an excellent job. Great build, video quality, and humor. Keep it up.
Thanks champ.
First I thought the bent bar for the locking mechanism was needless aesthetics, till I saw how it worked: genius! Nice work. I have a sliding miter saw that sticks out everywhere, so other designs won't work. I think your cart design will handle all the lanky stick-out pieces. Thanks for this!
Glad it may help, Thanks.
Can’t decide if the build or your sense of humor is better. Subscribed.
Thanks bud.
This is the 1st auto locking flip top I've seen, so simple and practical, beautiful!
Other details like the stops and bearings make this video (and the cart itself) stand out in a "crowd" of DIY flip top videos.
The folding "wings" are also a nice addition for a space saving cart, although in my experience with folding tables, this design starts to "play" a little after a while. Since you've posted the video more than 6 months ago, I'd be happy to hear how it's been working for you.
Thank you for this video.
Cheers bro, my table has been used quite a lot and I am more than happy with the way it has stood up. Good quality heavy duty piano hinge seems to have work nicely .
Great build… most of all I like the automatic latching system for the flip top! I’m about to improve my workbench which includes a flip top mitre saw station, and I’ll definitely be copying that 😊😊
Nice, hope it all works out for you.
As @ironCreekSW26 said, I also have been glued to the videos of other woodworkers and their version of a flip-top cart. I see so many things in your design that are over the top from other designs. Thanks for taking the time to show off your great skills. I had intended to build a bench with my Miter Saw attached, but you simply showed me I don't need to waste a whole bench for that tool, and that makes me smile 😁. As I finish my new workshop I will add your design to my build plans. I look forward to digging through your designs. Cheers - Lowell
Awesome stuff, I am glad it helps. Let us know how it turns out.
@@RJsShedShop
Will Do!
You are. A world class engineer at this level.
You are to kind, thankyou.
This is the best flip cart that I have seen on CZcams!! Legit skills!!! Respect!!!
Thanks so much.
This is 150% what I was looking for! Just bought a planer and saw a DIY on how to build a planer stand. Then I thought, "what about a flip stand", then, "what about a flip stand for a mitre AND planer", then I thought, "what about a flip stand with feeder table for mitre and planer".... the algorithms read my mind.
That's so good, I glad this may help. If I had my time again I would double up on the thickness of the two side panels, that's only a minor improvement. good luck bro.
Dude your narration was gold
Noice table too. Jealous
Thanks champ.
A great build, makes my flip cart look very shabby ,thanks for posting from Garry in the UK
Thankyou, as long as your cart works and your creating all is good.
Great job. I’ve had a miter saw and just bought a planer. I really like this idea for my small garage shop. You’ve got a new subscriber.
Thank you very much!
Nice work. I really like some of the little things that you've added to raise this cart up a notch from others. - Chris
Thanks, always trying to make it as user friendly as possible.
bloody ripper mate with comical narrative chucked in ha ha well done
Thanks champ, glad you enjoyed it.
Just found this video, brilliant build mate! It's good to see a new and creative flip top design, now I need to rethink how I want to build mine.
I hope it turns out great.
So glad to see another one of your videos. Great to see your shop finally taking shape. Well done
Glad you enjoyed it, more to come, thanks.
This is the most well-thought-out design I have seen. This positively earned a subscribe and like! Thanks for this!
No no, thanks you.
"Using my stomach as a third hand..."😄
"Then I procrastinated for half-a-day deciding whether to install on inside or outside of the frame..." You're so relatable!
Thanks for these great ideas. It's clear that your final product is not only beautiful but also fit to last. I love the idea of using bearings and also like the built-in stops you created. I was tempted to rewind and quote every funny quip you made, but I decided to take your instruction and stop procrastinating. Thank you - for the guidance and the laughs!
Glad it may help and glad you had a laugh, thanks for watching. Sounds like your about to build your own, let us know how it goes.
I was thinking, I’d love to be a fly on the wall in your shop, there’s so much I could learn! Then I thought, the next best thing would be to subscribe! So that’s what I did.
Thanks mate, let us know if there is a video or build I can try for you.
Great vid. Loved the commentary,especially the comment about using your gut as a third hand! I can relate. Cheers brom
Thanks champ.
The best cart that have seen till today Big Well Done
Thanks mate.
Love this idea! Great job!
Thanks mate.
Great build, superb detail.
Love the procrastinating for half a day for internal or external. We have all been there. 😊
Its all part of the deal, thanks for watching.
Very nicely done. I have been watching flip top cart videos for inspiration over the last couple of days. This is the best one yet. Very well done.
Thanks bro, I hope it helps.
RJ, this build is outstanding, I may give a shot, thank you.
Thanks, go for it, all the best.
Excellent! Really do appreciate the very efficient video editing.
Thanks, my video editing needs a lot of work.
Absolutely love the design. So many of the ideas I've had, but actually put in place. You have definitely saved me some headaches in the future. Also, I love the humor and hope that your channel blows up!
Oh thanks so very much, just hope that whatever I do helps in some sort of way. Cheers bro.
Excellent video! Great concept/design/execution, perfect pace, clarity, and level of detail in the instructions, and flawless editing. I wish all YT videos were like yours. Subbed.
Thankyou so very much.
I didn't want to build one of these before I watched your video, but now I do. Great work and nice shop!
If you go ahead let us know how the build turns out. Thanks for jumping on board.
I was really surprised how much cutting power (and torque) this saw had out of the box. I've used other (10" saws) previously and was pretty surprised with the speed and cutting ability of this Dewalt saw.I have bolted mine to a table to minimize movement which I highly recommend.This is a Great saw czcams.com/users/postUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe with a light to see your cutting line (not a laser line).I'd recommend this saw fro anyone looking to upgrade from a 10" miter saw.
Bloody impressive. As a fellow Australasian I feel kind of proud.
Thanks bud.
Nicely done! I like the bearing and pipe idea with the planner going in the same directions as the foldable wings. Can't wait to try this on my own!
Nice, let us know how it turns out. Thanks for watching.
I'm getting ready to build one of these. I'll need to remember to use the snotty goop!! :) Well done!!
Thanks .All great craftsman use good quality snotty goop.
First one to use ball bearings on the swivel.
Top man.
Has anyone designed a swivel arrangement which rotates 2 horizontal tables. ?
Like the big wheel at a fairground or a rotating arm with a self levelling platform each end which keeps the tool upright and can still be double stacked.
Next is the dust extraction.
I think the bearings keep it way more accurate and give it a way more positive location. Dust extraction on my chop saw has been a challenge.
Thank you for a Super Fantastic idea!!!!! Just what I was dreaming about..!!!! Keep up the good work
Cape Town
South Africa
Thanks mate.
Very nicely done RJ. This is the one I’ve been looking for to put in my shop. Thank you so much for sharing this.😊
That's great, hope it all goes well.
Very nice build. I’m looking to build one for my planer and miter saw. I will definitely incorporate ideas from your build. Great job.
Thanks mate.
Awesome build mate top stuff !!
Thanks bud, glad you enjoyed.
Great presentation, easy to follow and understand, and definitely a project worthy of any small shop where space is at a premium.
Thanks champ.
Nice innovative touches. Great vid!
Thanks champ.
Nice work I love the idea of the bearings !
Thanks man, sure helps keeping all true.
That looks really brilliant. I was just thinking out how to make this exact piece and searched for flip carts. Couldn't really find any with the mitre saw and planer like I wanted, and voila! There comes this video. Great job!
Thanks hope it helps, let us know if you build one, good luck.
There is only one thing missing on this stand. And that is a place to store that stop block. I know that I would end up loosing it within minutes of switching over to planer mode. Just need a short section of t-track to put it on that is out of the way. Thanks for all the ideas.
Yes it has since been addressed. Thanks .
Best video on this cart! Thank you for the moving effort
Thanks champ, glad you enjoyed it.
Probably the best one I’ve seen well done
Thanks mate.
Very nice job on the flip cart.
Thanks bud.
Good job RJ. Thanks for sharing
Thanks for watching, glad to share.
Wow! I had discounted these setups as too unstable. Your video and setup has changed my mind!
Awesome, thanks I hope ya give it a go.
Brilliant! Great job, great commentary. Just subscribed 👍
Thanks champ.
One of the best I’ve seen. Good job
Thanks heaps, glad you enjoyed it.
Very nicely done, and a great video! I will steal the locking mechanism. Thank you for investing the time to make this video, it really helped me to design my own flip table. I will start building it this weekend.
Awesome, thanks for watching, let us know how it turns out, all the best.
Very nice video, and creative. I like the snap rods idea very cool.
Thanks mate.
this is the combination that I need to my small workshop ,thanks man👏👏👏
I hope it works out for you. Thanks heaps.
Very well designed piece of kit... it's now on my list of things to do... great job 👍👍👍
Awesome, let us know how it turns out.
Frickin brilliant! Loved it!
Nice, thanks for watching.
Seen many of these builds on youtube, your's is unique and the best. Bravo.
Thanks so much bro.
Bloody hell mate that's fantastic 🎉
Thanks bud.
That is a awesome build
Thanks
Excellent - Creative and skilled ! BRAVO
Thanks.
Great build!
I'm glad you like it
Very nice - I am studying videos and looking to make a flip cart for my drill press and miter saw. I watched another that had a sliding surface so that the flip cart (table) could be wall mounted. I am going to combine that with a lot of features from your design. You have inspired me to get started! On your cart, I really like the self locking feature, your use of bearings rather than pipe on wood friction fit, and the stop blocks for the rotation (great ideas).
You also held my interest for your entire video (I find myself skipping ahead on most videos) so your content was perfect.
Thanks heaps for that comment, means a lot. Let us know how your build turns out.
Cool build man !
Thanks, glad you enjoyed it.
Very Excellent Job! I have seen a lot of different variations of a flip cart, but I think I will try to make one something like this :)
How cool, glad it may have helped, all the best let us know how it turns out. Cheers.
Great job!👍
Thanks mate.
So inspirational such a good idea
Thanks heaps
I like your genius idea....
Thanks champ
Excellent design!
Thanks champ.
I love this and may attempt something similar. I say similar because I often take my mitersaw to remote job sites, so I will make a base that is similar to the bosch stand it sits on for quick changes.
Thanks, great idea to have it interchangeable.
Nice work mate.
Cheers bud, thanks.
Good job! Well thought out.
Thanks man.
effettivamente un progetto utilissimo e ben fatto... quasi quasi provo a farlo... molto utile visto il sempre poco spazio a disposizione..
Thankyou, much appreciated.
Great locking,catch
Thanks heaps, and thanks for watching.
Great job mate.
Thanks bro.
Awesome, I love it.
Thanks for watching .
Hey, I am collecting alot of build videos to pick and choose for my new shop (first one) and would love to hear you say that there are plans for this beautiful work of art. The video was fantastic and very understandable. Many on the Tube aren't always as clear as yours. Great job. Keep putting the videos out.
Thanks so very much. If I could do plans I would and they would be free. Just want others to enjoy.
Nice work.
Thank you! Cheers!
😊very good design.
Thanks mate.
Very well done.
Thanks mate.
I paid $15 for an average flip top cart plans and this is 10x better than that. Please make some plans for this one. This is exactly what I need.
Thanks mate, if I knew how to do decent plans I would.
Well done!
Thanks champ.
good job Mate
Thanks champ.
Bravo! Come mai hai così pochi iscritti? Bravo veramente.
Thankyou, only just starting out.
Nice build!! You gave me some inspiration to start building my own. Going to use it for my miter saw fold away and nothing on the other side. Dont have that many machines yet and could use it as an extension table when its all flat at the top. :)
Haha, was just about to ask if you had shares in a screw manufacturing company, when you noted yourself you drilled way too many holes :)
Love the Jorgeson clamps btw.. Here in Netherlands I could only buy the maller 300/50mm ones. Hope the larger ones will be available one day. Very good and practicle clamps!
So glad it helped out. let us know how your build turns out.
Very nice super, genius .
Thanks heaps.
For me, I think I'd rather have the plugs outside where I can get to them. Sometimes I need to take my saw or planer to location. I wouldn't want to disassemble the table to do that. Great build though. Really nice.
Fair call thanks for watching.
Hey RJ,
Wondering where you got off too! Very nice flip top, the auto lock mechanism is clever and strong. As usual we'll done.
Of course your shop is too clean (I've got that same kinda OCD) and my back still aches from watching you wrestle that planer into place. ouch.
OCD in a workshop is a great advantage. My little stomach comes in handy when lifting a heavy load. Thanks for watching.
Perfection.
Thanks.
This is the flip cart I was looking for. The orientation of the planer to also use the feed supports along with the saw is what nailed it for me. Please, PLEASE, for everyone here (but mostly me), can you post in a single comment here, at least the dimensions of the main big pieces? Inches or cm, either way, but anything at all would be helpful. I'm probably wrong here, but guessing close to 92x76 cm (~ 36x30 inches) for the platform and sides. But just the big parts would be very helpful. Thanks for a great idea and build video!
I will get back to you soon with some dimensions soon. Thanks for watching.
Turn Table HxLxW 120 x 730 x 600 , Carcass 760 x 900 x 600 , Wings 100 x 730 x 500 mm. That is without the castors. good luck bro.
Thank you very much, sir! (Heh, from all of us, I think) @@RJsShedShop
My favorite is the locking mechanism. Every other build I've looked at appeared to be way more complicated than necessary. Nice solution. Could you perhaps post a link to the spring loaded hardware you used? Not even sure what that is called. Great build, thanks for sharing.
Thanks champ. I new to this CZcams thing I will have to put that onto my learn to do list. Thanks heaps for watching.
Very nice
Thanks mate.