Whats so bad about it? Seems like a well built, rugged & nice size machine for young & smaller riders. Sometimes, as with any equipment or machines. Some love them & some dont. Especially if it has not been taken care of suddenly it sucks. Some owners just expect them to operate & stay perfect with zero care. Yet an owner with a nice one will say its a great machine
My son's Phoenix 200 will go in reverse (albeit slowly) but not forward, I do not hear any grinding. I have read where this could be a belt slipping, but it surprise me it would go in reverse if that is the case. Does that make sense?
@@brothersmechanics2028 I let it sit over night, pulled the plug this morning, water poured out of it. No burned smell, no metal shavings, just dirty water. Let it dry for a bit. Cranked and drove off without a hitch. just as strong as before. My son and daughter had been going through a couple of low creek crossings a few times and I guess water got up in around the belt housing causing it to slip.
Love the home improvement tools
I’m sure they work wonders on the equipment
Whats so bad about it? Seems like a well built, rugged & nice size machine for young & smaller riders.
Sometimes, as with any equipment or machines. Some
love them & some dont. Especially if it has not been taken care of suddenly it sucks. Some owners just expect them to operate & stay perfect with zero care. Yet an owner with a nice one will say its a great machine
My pheonix is making little ringing noise by engine what could it be
How do I remove the front belt thing
Do you have any videos on how to change the CV boot on the swing axle on this quad
Unfortunately not yet, the next time we get another one of these in ill make one.
Can you do a video of how to change oil for this atv too thanks.
I will do a quick video of it this week and post a link to it. Thank you!
Here's a quick video on the oil Change:
czcams.com/video/eVzkQI5IimE/video.html
My son's Phoenix 200 will go in reverse (albeit slowly) but not forward, I do not hear any grinding. I have read where this could be a belt slipping, but it surprise me it would go in reverse if that is the case. Does that make sense?
If it goes in reverse it is highly unlikely the belt. Check the shifter adjustment.
@@brothersmechanics2028 I let it sit over night, pulled the plug this morning, water poured out of it. No burned smell, no metal shavings, just dirty water. Let it dry for a bit. Cranked and drove off without a hitch. just as strong as before. My son and daughter had been going through a couple of low creek crossings a few times and I guess water got up in around the belt housing causing it to slip.
Do you need a clutch puller to remove the primary clutch?
Some years yes
You know how to get the Kickstart working again? I've got one and the Kickstart gets stuck and is hard to do
Sounds like you need to take the whole mechanism apart and lube and clean it. Check that the spring is still good and connected properly.
Ok. Will do. Thanks
Hi,size of Belt?
Size(Circumference*Width):819*20(mm)
Replacement Part Number:0452496
@@brothersmechanics2028 thx;)
Worst atv ever made, and it's NOT even a real Polaris; it's made in Taiwan if I remember right. I sold a 3 year old pink Phoenix for $700. Garbage!
Definitely not the best atv lol
Why is it so bad? Seems pretty rugged & well built to me & it's a nice size & cost for youth or smaller riders.