@@337speed now I need u to do a comparison with the hemi 8.1 ND the vortec 8.1 motor yes that's right gm and dodge both make 8.1 motors in early 2000s Era I want a comparison
Nice video. One additional fun fact: I worked at Chrysler HQ from 2002 - 2007 and near the end of the Chrysler/Daimler debacle, the new directive was to place a Hemi in everything and damn near all efforts were placed into making that happen. Fast forward to today, and you see the fruit of that labor.
Their terrible reputation as an Auto manufacturer? Pretty much every auto dealership around me is empty with the exception of the Jeep/Chrysler lots, they're full of inventory.
The 5.7 is more responsive to mods than the 6.4, that’s why you don’t see many fully built and modded 392s, it just makes more sense to just get a Hellcat. It’s also not like you can’t build a 1200 hp LT, Hennessy will even give you a warranty.
The 5.7 is like the scat pack the reason they take bookstore is because they have more to gain than the scat. It's like a fat lady and a skinny lady at the gym, who is going to get bigger results?
Has much less to do with any of that and much more to do with the build cost for the Apache 6.4 due to the height of the ringlands. You have to internally build a 6.4 before doing any boost mods or nitrous whereas the 5.7 comes plenty capable of doing either from the factory. It's more cost effective, but the 6.4 is absolutely capable of having a killer build with high horsepower, I've seen them before. Including a TT (twin 58mm's) Yellow Jacket build knocking on the door of 1k hp on a light tune.
Both pieces of dog sht will end up imploding and wont live to see more than 50k miles. Ls all day every day... There is a reason Why these cars are the saturday night special of the basquetball youth.
@@joebone3151 wrong you need to go back school. They took a magnum cylinder head and drilled top dead center holes for spark plugs. That does not make it a Hemi. You are uneducated. It's ok. To be wrong and to be lied to. Go I am 2PAC alive and well since you believe Dodge lies. Look at the 60s Hemi. Hell go back farther and look at the Hemi that Ford original built before selling it to Dodge. I could go on and on.
@@lincolnls0416 Hemi engines are quite different from an LS/GM engine. That's why the ZZ632 can hit 1,000hp NA compared to the Hellaphant and its super
@@yrkjrk2972 look I am an ASE mechanic and they are not real Hemi's they are Magnums. Fck Hemi means Hemisphere now these Fake Hemi's don't have anything Hemisphere in them or about them. They also fit on magnum block's. Next 5.0s have been getting way over 1k HP. Since they were Carb engine's.
Wow, what a surprise. Most guys would have just listed everything absolutely wrong, going on a tirade, and I wouldn't blame them because it's a lot easier to make content being critical, and deconstructing a design, especially when you've got experience wrenching, and building these engines...but you gave credit where it was due! Takes a big man to look at things from the positive perspective. Heck, made me feel/look like a hater critical of the Mopar, when I'm supposed to be the Mopar guy Lol!
Shit I love chevy but they fell tf off and these days for any environment situation Mopar is killing it because my jeep is alot of fun when we get a ton of snow but my impala still is my baby for spring and summer🤷🏾♂️😂💯
Get off his nuts. The title of the video alone is moronic. When most mopars weigh over 4klbs no power is too much. This guy gets his info off Google he is not anything special .
Another person that has a great knowledge of engine module specifications and how these engines work. I highly recommend this channel for racing folks like me.
I think we can all agree if everybody threw everything they could at any of these platforms you can close to a couple thousand horsepower out of any of them Dodge Ford and Chevy
I'm not as familiar with Ford, but the latest generations of LS and Hemi are amazing. You can get big horsepower numbers with simple one-click order kits! Back in ye old days of yore, I remember working on budget performance engines with my dad. You had to plug some oil galleries, bore out others, and pull all kinds of tricks to get oil pressure to the right places. No one could really tell you 100% what needed to be done for a given block, so you had to take advice from this book, that magazine or old Gus who worked down at the machine shop. Forget about kits! You'd have to mix and match this part with that one, and see what could be machined to order.
@@NateandSelena I lived in OC and San Diego for around 8 years....you overpay for everything there. When I lived there wages were slightly LOWER than back in Minneapolis. Employers joked that you were paid in SUNSHINE DOLLARS! Ah...right...
Procharged my 392 yellow jacket cracked 6 pistons. Went with the HHP/BES forged 392 🤌🏽 620/590 on 8psi low boost Twisted the driveshaft 😑 Went with DSS carbon fiber 1pc. Blew out the axles 🤦🏽♂️ Went with DSS half shafts 💪🏽 Now its all rated @1500hp lot more aftermarket parts but its good now Transmission is def at the brink tho.
Take your transmission to Southern HotRod i heard they do good work on transmission but you got to ship it to them and they will ship it back to you once they’re done
Geez I think i’ll stay stock I’ve heard several stories like that im not sure i have the stomach to spend 20k to pick up a second at track and still get beat buy half the electric cars being sold. Although im sick of getting 12:40s at 1/4 it’s depressing also.
The Eagle heads are an absolutely fantastic design. They respond well to porting on top of the fact that they flow pretty wild numbers right out of the box.
I appreciate videos like this! Very informative and entertaining, I hope you post more like these! Especially covering more engines, from Honda, the Mitsubishi 4G63T and 6G72 engines 😎👊🏽
Not what I expected at all,well done! No sensationalized click bait crap here. Great knowledge and well presented. Not just a spam over view like most. You took the time to show some solid technical. You presented the ring-land and clearance issue nicely. You didn't dumb it down for views and still presented it in a way that most will understand it easily. Liked.
Man the SRT-4 was the coolest and most unique SRT made especially in it's class. Nothing was ever like it and it made great power , smoking cars 2 to 3 times it's price. The exhaust note was heaven sent
I like the video, great work! One major correction: the SRT engines have never been a bored out version of the 5.7L. They are separate blocks and are treated significantly different during manufacturing (ex: deck plate honed).
If I remember correctly, the SRT8 engineers were saying the 6.1 is indeed a different engine and was engineered to be raced for 100k miles before a rebuild.
They have the same block. I know this because the 6.1L Hemi has an orange painted block, “Hemi orange”, so that they could differentiate the blocks in the factory.
6.1s started out as 345 blocks and just upstroked even tho 6.1s are thinner casting blocks from a 6.2 and 6.4 and 5.7 different block but still started life as a bare block 345ci
Haven't finished the video quite yet but I can vouch for the 6.1 reliability, got a 2010 Challenger SRT that gets daily driven (and yes through the snow) and has 167k on it with same trans and the motor has never been cracked open once
I have a 2015 Charger Scat Pack with 107K miles I have not spent a dime on the engine and transmission other than tires and brakes (specially tires). This is my daily driver car and used to drive 100 miles a day to work. So far I haven't got the HEMI tick issue as of now, if the tick destroys my engine then I might plan to modify/rebuild the engine or put a 426 HEMI (whichever is more viable) since my extended warranty expired last month and then finally take the car to the track :)
Only way chevy can make a real good come back is to get those 632's in a updated chevelle but keep it with alot of its classic traits since the corvette is high priced and looks alot like a Ferrari now😔
Another thing to note with these engines, is that the truck blocks 6.4 bge, were more robust like the hellcat block, and the truck heads use a different casting, but the same alloy as the hellcat heads. And also flow very well.
The BGE block used in the trucks is also used for the hellcats. The difference is that the BGE block is deck honed for the hellcat not the trucks and of course the different internals (cam, pistons etc.) and the heads. At their base though it's the same block.
Excellent video! I have 2006 300c SRT8 6.1L. 12.9K miles great condition. I feel its the best sounding HEMI 😌. Love the simplicity of the engine. 8 cylinders all day everyday! I like the idea of building it up but I'm enjoying my light mods for now (tune, exhaust, CAI) with 275 tires on all around.
I used to have a 07 300 Srt8, I miss that thing to death!! Having a HC is cool & all but it comes with unnecessary attention.. if I had to do it all over again.. I would’ve dropped a built up motor in the 300… the one thing I didn’t like about the 300 was that the suspension stayed in Trackmode..
@@mr.300c A stroker kit or motor. I wanted to put a blower on it but I kept hearing about the issues the car would have & need, like new axles, different trans to handle the boost, I enjoyed it stock though.. I mean that thing really jumped off the line hard like a 1320 lol… Even though I have a HC now I never look down on those older SRT8’s. HC’s are cool but they have lag on take off & there’s always the threat of loosing it.. I never felt like I was gonna loose my 300 though.. I did widen the tires in the rear.
@@marlboropiked very valid! That's my thing, building is cool but for me if you go too far then I feel financially its better just to get a Hellcat. The 300 SRT does jump off the line good though 🤭. I can imagine being annoyed about loosing control in Hellcat if you keep your guard down. I still want to experience a 392 (widebody) too. I love the 8 speed tranny. 😍 Hellcat is always a big dream but my 1st dream was a 392. We'll see how things transpires when the car market corrects itself. I can always keep my 300 too. I only owe like $5.6K and my payments are $196. I have about 2 and half years left on the loan (only 2.9% APR). Just barely passed 16K miles.😎
@@mr.300c those are good miles… when I sold mines it had 86k.. metallic steel blue… I got caught up in the HP numbers but 600-650 would be great for that car… I had them both for a bit to kind of see the difference. The suspension & 5 speed transmission was the biggest difference between the two besides one being supercharged. Also it was way cheaper to deal with the 300 vs the “money taker” lol!
I've always been one who appreciates all the performance the American big 3 put out. I've owned vehicles from all 3 over the course of my life and all were good. Currently I own a 2018 Mustang GT putting out about 500 crank HP with some mods and couldn't be happier. I looked at Camaros, Corvettes, and Challengers but settled on the Mustang mainly because of its looks, performance, and the sound of that Gen 3 Coyote. Of all of them I personally think the Ford 302 sounds the best coming out of a good performance exhaust. Mine is the Corsa Extreme and it sounds like race day at NASCAR lol
The gen 3 coyotes are on a whole different level. Small bock 5.0 with crazy reliable power on stock internals and stock block. Single turbo coyotes have hit 7-8 sec 1/4 miles and still reliable
I love what Dodge has done to the Hemi over the years. I remember when the 5.7 replaced the Magnum truck motors. People were blown away by the driveability difference going from a workhorse motor to the thrust of a Hemi. Little did we know we were getting "just the tip" of the iceberg. I just sold my 5.3 L84 Silverado for a Mercedes partly because of your AMG video. I'd say I wanna sell that now and buy a Hemi, but I already have one. My wife drives a 22 Ram Laramie with the etorque. Much as I don't like hybrids and electric stuff, that thing HAULS.
They use LS and LT engines in super cars and Hyper cars. F5 Hennessey uses a modified LSX to achieve 300MPH, I wonder why no one haven't used a HEMI in a lightweight mid engine supercar?
Great video, Nice edits, good content and the best part was: the information you shared was factual, not opinionated. Tons of content covered in a short amount of time. My Dad just got a charger scat pack. He's wanted a muscle car my whole life. Just retired and now he gladly rumbles the neighborhood when he leaves in the morning lol.
First video I’ve watched and I’m really impressed with everything. You’re editing is great. Your knowledge is outstanding. Keep up the great work you got great things coming!
Nicely done. You should mention the few initial hemis that started it all just to be complete. I'd like to see a rundown beginning with the Ford engines crammed into the Cobras back in the 60's all the way up to the current Mustangs.
Initially the hemi was a Mercedes I believe 6 cylinder. Mopar stole the design and obtained the copyright. Then they made 16 cylinder hemi's for planes and tanks.
Since my 5.7 blew up, it’s stroked to a 392 now and I have the best of both worlds. When it’s time to boost, I can really crank it up a bit when built right, until the transmission starts becoming an issue. Definitely a fun and raw motor.
What he said about boost is semi-correct. You can run about 8psi and be safe. At 8lbs, you're gonna be making about 520whp with no supporting mods on 93. You can run that on the stock motor and be safe. For an N/A route: headers, ported heads/intake, throttle body, cam, and e85 will get you to about 470whp.
@@scw19762011 There's no possible way you're only putting down 385whp if you're FBO, cam, port work, and e85. That's a fully built N/A setup minus a stroker kit. Depending on the tuner and how good your port work is, they could get you 470+ whp with upgraded injectors and added timing on the e85 tune. If you're only making 385whp right now, then I'm guessing you have an intake and a tune, maybe headers. Nothing big.
@@scw19762011 FBO as an N/A version wouldn't. It's still on stock 6.1L displacement. You can do everything to improve airflow and get a more aggressive cam with better fuel, but you wont make 500+whp all motor unless you stroke it.
Best boosted motors would be the 6.2 Hellcat motor, the 5.2 Predator, the 3800 in the GN, and the LS9. N/A there’s a LOT of options but to me personally it’s the LS3, the Coyote, the 6.0 LQ9, 5.2 Voodoo, and probably the LS1 for basically becoming the beginning of modern muscle again.
The Apache engine block 6.4l was used from the ram 2500 trucks for the hellcats. A similar cylinder head design from the Apache was also used but technically they are different materials. That’s about the only parts used from the 6.4l. Everything else is unique to the hellcat engine.
@tyrone reed I'll stick to my two to three thousand horsepower turbo Trans Am or my Turbo 4 by 4 Silverado that makes 1400 wheel horsepower. LS power. I live in the drag racing world, and I can't tell you how many of these hellcats that I've seen their Motors pop
This truly must be a trick question? We all know a certain liter of the SRT engines make good power stock. The problem comes in when you want to add more power. You can't just strap a turbo/SC on it like a LS or Coyote motor. You have to change the internals which is very very costly. Most gear head's know you can take a junk yard 5.3 or 4.8 LS and strap a turbo (your choice of forced induction) and make 1000hp without changing the internals. You can do something similar to the K24-A2 (can't forget my honda guys). You simply can't do that with a SRT, well maybe the Hell kitty motor, even that's a risk. When it comes to any major power with SRT motors if it isn't already boosted (SC) you aren't going to make a lot of HP stock. With the 6 liter motors you can change the upper and lower pulley to make more power, which is great. In comparison to the Coyote, you can simply change the blower to a V3 and make well over 1000hp without changing internals. Which is more cost affective than changing out the very costly internal upgrade to the SRT.
5.7's and 6.1's responded very well to camshaft replacement. The Eagle variants even more so. Making over 500hp at the crank on a non-eagle Hemi isn't hard at all with the correct cam and tuning. So if you're looking for a boosted engine, the LS is the obvious choice on cost alone. If you're wanting to do an all-motor build, the Hemi is an excellent platform but also responds quite well to boost. The early 5.7 with an opened up ring gap can make 800+ on an otherwise stock engine with a turbo.
@@sHoRtBuSseR true, they're one's out there. Although it comes down to cost. Once you have to open that thing up it'll cost at least 7k. At that point it'll be easier to get a $300-$500 junk yard 5.3 LS and get a precision turbo, for much less that it cost to put those o-rings on.
Richard holdner has a video where he make well over 1000 hp with a 5.7 on boost from a junk yard simply with gapping rings. If they are gapped right glory runs can be made but really it make’s sense to get forged pistons drop the compression for boost due to longevity. And while your at it cam it. Cylinder pressures become an issue on boost in the higher compression range because the cars are heavier dodge needed an edge but equally works against you for boost working with a higher compression motor this is why the hc is so popular.
Actually most dyno’s I’ve seen of bone stock LT Camaro’s and Challenger 392’s put them right about a difference of 20RWHP… At that point though your issue is with the drive train and not the engine since crank horsepower is a 1:1 figure.
Ford Mustang GT 460hp, chevy camaro SS lt1 455hp, scat pak 392 485hp. Even if they are on a dyno they would be very close not 5-10hp difference more like 20whp because the 8 speed trans in those is quite good even though they are lacking 2 gears.
@@joshreynolds729 Ive seen most 6.4 L dyno around 430whp and I’ve seen 10 speed 5.0s dyno at 430whp, but for most part 6.4 should have higher numbers. There’s a guy on CZcams with a stock 392 with shorty headers and intake no tune. He dynoed 472whp on mustang so that’s like over 500whp on dynojet. Don’t ask me how lol. And it shows on the street when he races.
@@boostidavis I’ve scene some cars that just put in work better than the rest on a dyno not all cars are created equal. Scene dynos vary quite a bit as well. In either case it’s a good time for a v8 powered muscle and the fact they are so much better than they used to be. See we could be arguing over a 5.7 hemi vs a 3v mustang 🤣 so life is good. Both amazing platforms.
I bought a Ct6v , love the power and comfort, wish there was more detail on this motor . Also the factory dealership guys know almost nothing . About what they sell on this . Please do a synopsis, thank you !
My dad had a 2009 Challenger with the 6.1 and while we didn't have it too long after he passed, not one problem with it at all. It also didn't feel like a typical sports car inside, it had a nice black interior with the seats thick enough to make reaching to the floor behind them just impossible. I guess that is a problem in many cars really. It is the first thing that comes to my mind when someone wants me to reach behind me and get something. The only thing I dislike worse is trying to read a book or anything inside the car because it nauseates me. It doesn't bother me reading anything at all outside the vehicle but try to get me to read a lot of paper in the car and be prepared to have your interior a mess!!!
You can push 8lbs of boost out of a 6.1 and be fine. I'm currently on 6psi with no issues. I'll definitely be getting forged pistons and rods when I upgrade pulleys though.
Love these educational videos!! Let’s see something from you about the VQ engine or maybe VQ35/37 and VR30. Would like to see reasons why people use the VQ for tuning and roll racing.
The VQ35 had good torque stock, but generally don’t hold up. Ringland issues and rarely make more than 600hp without being forged etc. G35 was a beautiful car when introduced in 2003. I had a 6MT with Brembo package. Loved it. But the car had several issues including the infamous syncro problems in the transmission.
@@jigsaw3334 oh yeah had a pretty nice 07 Altima with a VQ 6MT pretty peppy but after fucking with it too much it wound up not going into 2nd and 4th and it smoked (blown head gasket) decided to let it go. They’re fun when done right I can say that.
People use many motors for tuning, there's no specific reason. Its a good motor that you can make power with. Nothing more to say. I had 05' Altima SE-R. She was a bad bitch. Traded it in on a truck. Every man needs a truck.
I absolutely love my SRT'S. 14' SRT Jeep, 15 Hellcat, and 16 SRT 392... That being said I have some bills from the dealership that would make anyone reconsider a 392. On my Jeep I dropped almost $20,000 in under a yr in the service department.... They are fun but definitely not a long-term vehicle....Currently looking to get a new ZL1 Camaro. Can only take soo many hits before switching teams!!!
Can only assume that's 20k usd? What services cost that much? Had mine for 2 years and do my own services..maybe $500 aussie dollars annually. I need the jeep height clearance, cant think of another vehicle to replace it with.
I did your final option you talked about Got a 5.7 RT and built the hell out of it with a 233 cam and a 408 stroker (as well as many other items) Its fun watching coyote guys jaws drop when they not only cant catch me but I keep pulling away from them with ease.
Thank you for the advice on upgrading the 5.7! I love the 300s and since they don’t make srt models for them I’ll just have to look into what you said!
Would like to see more about the NorthStar 32 valve V8. I know alot of people wouldn't care about it. I just want to know why GM went with this engine in some of its vehicles instead of the LS motor
The North Star was an overhead cam engine whereas the LS is a pushrod engine. The LS has great low end power, but the North Star can rev a lot higher and makes peak power in a much different area of the range. If you can fix the head gasket issue they're actually great engines.
It was a semi popular and cheapish upgrade back in the mid 00`s for mustangs. We had one we were going to build up and put into my then new 02 gt, never did it though. But in stock form they were crappy for enthusiasts
@@iwishigaf It just aint right that the heavy Chrysler 300 no longer offers the V8 variant here for those who want it. I guess most people here in the US dont care about performance so the V6 is the bread and butter. The Pentastar V6 is a nice N/A 6 cylinder but the 300 needs as much torque as it can get.
Simple: If you can only drive in a straight line and cannot build, get Mopar. Nothing wrong with that. If you can drive Circuit and a more into building your power. Get a Chevy. Both have their benefits.
This engine series has been awesome. You should do it for every performance engine out there, JDM, Euro, and moar American muscle.
Yup that’s coming next!
@@337speed now I need u to do a comparison with the hemi 8.1 ND the vortec 8.1 motor yes that's right gm and dodge both make 8.1 motors in early 2000s Era I want a comparison
@@jackdaniels2657 stop calling this fake Hemi a Hemisphere engine. 🤦♀️.
@@lincolnls0416 I just want to see the dodge 8.1 engine VS gm 8.1 engine
Great animations also, you don't see that often.
Nice video. One additional fun fact: I worked at Chrysler HQ from 2002 - 2007 and near the end of the Chrysler/Daimler debacle, the new directive was to place a Hemi in everything and damn near all efforts were placed into making that happen. Fast forward to today, and you see the fruit of that labor.
Nice 👍
That's so cool love it! Dodge Challenger/ Jeep for me! Thank you!
Their terrible reputation as an Auto manufacturer? Pretty much every auto dealership around me is empty with the exception of the Jeep/Chrysler lots, they're full of inventory.
yeah but chargers and challengers are so ugly
U just wanted to say u worked at the headquarters 😂, name drop much?
The 5.7 is more responsive to mods than the 6.4, that’s why you don’t see many fully built and modded 392s, it just makes more sense to just get a Hellcat. It’s also not like you can’t build a 1200 hp LT, Hennessy will even give you a warranty.
The 5.7 is like the scat pack the reason they take bookstore is because they have more to gain than the scat. It's like a fat lady and a skinny lady at the gym, who is going to get bigger results?
Has much less to do with any of that and much more to do with the build cost for the Apache 6.4 due to the height of the ringlands. You have to internally build a 6.4 before doing any boost mods or nitrous whereas the 5.7 comes plenty capable of doing either from the factory. It's more cost effective, but the 6.4 is absolutely capable of having a killer build with high horsepower, I've seen them before. Including a TT (twin 58mm's) Yellow Jacket build knocking on the door of 1k hp on a light tune.
Both pieces of dog sht will end up imploding and wont live to see more than 50k miles. Ls all day every day... There is a reason Why these cars are the saturday night special of the basquetball youth.
lol I’m going through the process of modding mine now..
@@marquis3733 You mean the one you stole?
Hemis have grown on me lately since I owned one. But the LS family will always be superior to me just more reliable and efficient
🤣😂🤣😂. Fake Hemi's you mean. Not real Hemi's. They are Magnum engines with a name plate.
@@lincolnls0416 false. It's a hemi for a reason
@@joebone3151 wrong you need to go back school. They took a magnum cylinder head and drilled top dead center holes for spark plugs. That does not make it a Hemi. You are uneducated. It's ok. To be wrong and to be lied to. Go I am 2PAC alive and well since you believe Dodge lies. Look at the 60s Hemi. Hell go back farther and look at the Hemi that Ford original built before selling it to Dodge. I could go on and on.
@@lincolnls0416 Hemi engines are quite different from an LS/GM engine. That's why the ZZ632 can hit 1,000hp NA compared to the Hellaphant and its super
@@yrkjrk2972 look I am an ASE mechanic and they are not real Hemi's they are Magnums. Fck Hemi means Hemisphere now these Fake Hemi's don't have anything Hemisphere in them or about them. They also fit on magnum block's. Next 5.0s have been getting way over 1k HP. Since they were Carb engine's.
Wow, what a surprise. Most guys would have just listed everything absolutely wrong, going on a tirade, and I wouldn't blame them because it's a lot easier to make content being critical, and deconstructing a design, especially when you've got experience wrenching, and building these engines...but you gave credit where it was due! Takes a big man to look at things from the positive perspective. Heck, made me feel/look like a hater critical of the Mopar, when I'm supposed to be the Mopar guy Lol!
Shit I love chevy but they fell tf off and these days for any environment situation Mopar is killing it because my jeep is alot of fun when we get a ton of snow but my impala still is my baby for spring and summer🤷🏾♂️😂💯
Fiat fans
Ohh 😮 Lawdy
I have a 14rt I'm in love with and cleaner than a mfer.
I need forged internals, mdx kit and a hellcat supercharger
@@slyfox4564 what’s a fiat??
Dudes editing and knowledge is awesome. Keep it up 👍
All he fuckin does is read about the engines dude ain't shit
big facts!!!
Get off his nuts. The title of the video alone is moronic. When most mopars weigh over 4klbs no power is too much. This guy gets his info off Google he is not anything special .
6
@OPOL didn’t know google did self editing
Another person that has a great knowledge of engine module specifications and how these engines work. I highly recommend this channel for racing folks like me.
From a technical standpoint you covered the Hemi quite thoroughly. Excellent expression and attention to detail in research. As a GM guy, respect.
I think we can all agree if everybody threw everything they could at any of these platforms you can close to a couple thousand horsepower out of any of them Dodge Ford and Chevy
Perfect way to summarize it Craig! All the same in the end...and now with $5.00 plus gas, do you really need 1000 HP?
Ever heard of mopar tax's?
I'm not as familiar with Ford, but the latest generations of LS and Hemi are amazing. You can get big horsepower numbers with simple one-click order kits!
Back in ye old days of yore, I remember working on budget performance engines with my dad. You had to plug some oil galleries, bore out others, and pull all kinds of tricks to get oil pressure to the right places. No one could really tell you 100% what needed to be done for a given block, so you had to take advice from this book, that magazine or old Gus who worked down at the machine shop. Forget about kits! You'd have to mix and match this part with that one, and see what could be machined to order.
@@gt-37guy6 shit il take 5$ all day for a gallon it’s over 6 in cali
@@NateandSelena I lived in OC and San Diego for around 8 years....you overpay for everything there. When I lived there wages were slightly LOWER than back in Minneapolis. Employers joked that you were paid in SUNSHINE DOLLARS! Ah...right...
Procharged my 392 yellow jacket cracked 6 pistons.
Went with the HHP/BES forged 392 🤌🏽
620/590 on 8psi low boost
Twisted the driveshaft 😑
Went with DSS carbon fiber 1pc. Blew out the axles 🤦🏽♂️
Went with DSS half shafts 💪🏽
Now its all rated @1500hp lot more aftermarket parts but its good now
Transmission is def at the brink tho.
That’s dope. Any videos?
Take your transmission to Southern HotRod i heard they do good work on transmission but you got to ship it to them and they will ship it back to you once they’re done
Would have been cheaper to get a hellcat.
Geez I think i’ll stay stock I’ve heard several stories like that im not sure i have the stomach to spend 20k to pick up a second at track and still get beat buy half the electric cars being sold. Although im sick of getting 12:40s at 1/4 it’s depressing also.
Just ls swap it bro
The Eagle heads are an absolutely fantastic design. They respond well to porting on top of the fact that they flow pretty wild numbers right out of the box.
Really liked your format dude, quick, direct, well edited and informative.
1:49 - That's my good boiiii from "I Do Cars" ❤️
When a Civic with a laptop gets next to him
It's gonna get OBLITERATED 😂
I appreciate videos like this! Very informative and entertaining, I hope you post more like these! Especially covering more engines, from Honda, the Mitsubishi 4G63T and 6G72 engines 😎👊🏽
Not what I expected at all,well done! No sensationalized click bait crap here. Great knowledge and well presented. Not just a spam over view like most. You took the time to show some solid technical. You presented the ring-land and clearance issue nicely. You didn't dumb it down for views and still presented it in a way that most will understand it easily. Liked.
Man the SRT-4 was the coolest and most unique SRT made especially in it's class. Nothing was ever like it and it made great power , smoking cars 2 to 3 times it's price. The exhaust note was heaven sent
Accurate AF
I have a blue one and it’s very cash money
I love the way it sounds! You were the shit driving a srt4 back then lol
I run a pt gt with a straight pipe and no air box, it sounds very nice
mazdaspeeds gap those easly
man, the 6.4 came out in 2011 5 years before the scat. I don't know anyone that calls the scat motor. It's more known as being called "392".
I call it the 6.4 or the scat
I call my 2011 what it is. A 392 SRT8
Bruh, you did a awesome job on this video. Keep going hard, your doing an awesome job with your content. And your break down is easy to understand.
I rebuilt a srt4 a few years ago, I was pretty impressed with the stock internals.
That guy tearing down the engine at 1:00, his channel is “I Do Cars” and the tear downs are just fascinating.
Bro this was so detailed and edited so well. Subbed
I like the video, great work! One major correction: the SRT engines have never been a bored out version of the 5.7L. They are separate blocks and are treated significantly different during manufacturing (ex: deck plate honed).
If I remember correctly, the SRT8 engineers were saying the 6.1 is indeed a different engine and was engineered to be raced for 100k miles before a rebuild.
They have the same block. I know this because the 6.1L Hemi has an orange painted block, “Hemi orange”, so that they could differentiate the blocks in the factory.
6.1s started out as 345 blocks and just upstroked even tho 6.1s are thinner casting blocks from a 6.2 and 6.4 and 5.7 different block but still started life as a bare block 345ci
@@RTBOY954x6.1s use the same stroke as a 5.7
How refreshing, just straight info. That was about as unbiased as you can be.
Haven't finished the video quite yet but I can vouch for the 6.1 reliability, got a 2010 Challenger SRT that gets daily driven (and yes through the snow) and has 167k on it with same trans and the motor has never been cracked open once
Bullshit. Chevrolet also kills the GAME LS and LT shits on the expensive ass Mopar
@@blueprintjdm your right my 2001 honda s2000 f20c engine and transmission are stock have 170k miles unopened no smoke or leaks
@@TheRealZJE313 What mopar pissed in your froot loops.
And the 6.3L Super Bee
@@destructoidx99 260,000 on my 4.0 inline 6 never cracked open, and 280,000 on my 5.2 litre 318 never been cracked open...
I have a 2015 Charger Scat Pack with 107K miles I have not spent a dime on the engine and transmission other than tires and brakes (specially tires). This is my daily driver car and used to drive 100 miles a day to work. So far I haven't got the HEMI tick issue as of now, if the tick destroys my engine then I might plan to modify/rebuild the engine or put a 426 HEMI (whichever is more viable) since my extended warranty expired last month and then finally take the car to the track :)
Direct connection has all the crate engines. The 392 isn’t a bad deal new.
I'm a total LS guy but this was great information and I was completely intrigued by the whole video...well done sir....
Only way chevy can make a real good come back is to get those 632's in a updated chevelle but keep it with alot of its classic traits since the corvette is high priced and looks alot like a Ferrari now😔
for straight line driving only
Another thing to note with these engines, is that the truck blocks 6.4 bge, were more robust like the hellcat block, and the truck heads use a different casting, but the same alloy as the hellcat heads. And also flow very well.
The BGE block used in the trucks is also used for the hellcats. The difference is that the BGE block is deck honed for the hellcat not the trucks and of course the different internals (cam, pistons etc.) and the heads. At their base though it's the same block.
I really enjoy these. Esp enjoyed the LS vs LT one. Learned a lot
Excellent video! I have 2006 300c SRT8 6.1L. 12.9K miles great condition. I feel its the best sounding HEMI 😌. Love the simplicity of the engine. 8 cylinders all day everyday! I like the idea of building it up but I'm enjoying my light mods for now (tune, exhaust, CAI) with 275 tires on all around.
I used to have a 07 300 Srt8, I miss that thing to death!! Having a HC is cool & all but it comes with unnecessary attention.. if I had to do it all over again.. I would’ve dropped a built up motor in the 300… the one thing I didn’t like about the 300 was that the suspension stayed in Trackmode..
@@marlboropiked good feedback. What type of motor would you have done? Stroker kit? Motor swap all together? Etc.
@@mr.300c A stroker kit or motor. I wanted to put a blower on it but I kept hearing about the issues the car would have & need, like new axles, different trans to handle the boost, I enjoyed it stock though.. I mean that thing really jumped off the line hard like a 1320 lol… Even though I have a HC now I never look down on those older SRT8’s. HC’s are cool but they have lag on take off & there’s always the threat of loosing it.. I never felt like I was gonna loose my 300 though.. I did widen the tires in the rear.
@@marlboropiked very valid! That's my thing, building is cool but for me if you go too far then I feel financially its better just to get a Hellcat. The 300 SRT does jump off the line good though 🤭. I can imagine being annoyed about loosing control in Hellcat if you keep your guard down. I still want to experience a 392 (widebody) too. I love the 8 speed tranny. 😍 Hellcat is always a big dream but my 1st dream was a 392. We'll see how things transpires when the car market corrects itself. I can always keep my 300 too. I only owe like $5.6K and my payments are $196. I have about 2 and half years left on the loan (only 2.9% APR). Just barely passed 16K miles.😎
@@mr.300c those are good miles… when I sold mines it had 86k.. metallic steel blue… I got caught up in the HP numbers but 600-650 would be great for that car… I had them both for a bit to kind of see the difference. The suspension & 5 speed transmission was the biggest difference between the two besides one being supercharged. Also it was way cheaper to deal with the 300 vs the “money taker” lol!
I've always been one who appreciates all the performance the American big 3 put out. I've owned vehicles from all 3 over the course of my life and all were good. Currently I own a 2018 Mustang GT putting out about 500 crank HP with some mods and couldn't be happier. I looked at Camaros, Corvettes, and Challengers but settled on the Mustang mainly because of its looks, performance, and the sound of that Gen 3 Coyote. Of all of them I personally think the Ford 302 sounds the best coming out of a good performance exhaust. Mine is the Corsa Extreme and it sounds like race day at NASCAR lol
The three valve was the best sounding modular engine from ford. It sounds great albeit not impressive power wise
The gen 3 coyotes are on a whole different level. Small bock 5.0 with crazy reliable power on stock internals and stock block. Single turbo coyotes have hit 7-8 sec 1/4 miles and still reliable
I love what Dodge has done to the Hemi over the years. I remember when the 5.7 replaced the Magnum truck motors. People were blown away by the driveability difference going from a workhorse motor to the thrust of a Hemi. Little did we know we were getting "just the tip" of the iceberg.
I just sold my 5.3 L84 Silverado for a Mercedes partly because of your AMG video. I'd say I wanna sell that now and buy a Hemi, but I already have one. My wife drives a 22 Ram Laramie with the etorque. Much as I don't like hybrids and electric stuff, that thing HAULS.
I was just looking to sell my Durango r/t and get a 06 e55 amg. Then I watched this video and I think I'm going to hold on to it
Remember, when the Hemisphere barely came out, they were actually call Dodge Hemi Magnum
Meant to say Hemis
Came out hemispherical
I have a Tesla performance and it will outrun practically anything on the road with ease and it only cost me $10 to charge
They use LS and LT engines in super cars and Hyper cars. F5 Hennessey uses a modified LSX to achieve 300MPH, I wonder why no one haven't used a HEMI in a lightweight mid engine supercar?
Because they’re heavy as fuck lol
@@carlosdeleon9593 Still, all the weight will be in the middle for great center gravity and probably 50/59 weight distribution.
@@Ayixlia Less weight overall is better though? Why use an inferior platform
Bc LS's are the superior motor😘😘 duh😁
@@Ls4_SSleeper ls is the biggest boat anchor ever
Great video,
Nice edits, good content and the best part was: the information you shared was factual, not opinionated. Tons of content covered in a short amount of time.
My Dad just got a charger scat pack. He's wanted a muscle car my whole life. Just retired and now he gladly rumbles the neighborhood when he leaves in the morning lol.
By far the best engine video I have seen. So much info and the video was great. Thank you 🙏🏽
This video is awesome, its amazingly done, good clear communication, i like the comparisons to other engines aswell, nice work👌🏽
I learned so much about these engines with your video man! Much respect to your knowledge and knowhows!
Reliability has left the chat room
love the videos you do on engines and the car selection in general!!
I’m not a v8 guy but this stuff was informative. Thank you.
First video I’ve watched and I’m really impressed with everything. You’re editing is great. Your knowledge is outstanding. Keep up the great work you got great things coming!
Nicely done. You should mention the few initial hemis that started it all just to be complete. I'd like to see a rundown beginning with the Ford engines crammed into the Cobras back in the 60's all the way up to the current Mustangs.
What about the sallys
Initially the hemi was a Mercedes I believe 6 cylinder. Mopar stole the design and obtained the copyright. Then they made 16 cylinder hemi's for planes and tanks.
@@bradlaflamme6127 harley did the same apparently
Very informative for someone who doesn’t know much about engines, but is trying to learn!👍🏾
Since my 5.7 blew up, it’s stroked to a 392 now and I have the best of both worlds. When it’s time to boost, I can really crank it up a bit when built right, until the transmission starts becoming an issue. Definitely a fun and raw motor.
Dope video, should do transmissions and rear ends next maybe.
I still can’t get over the fact that these cars are just w210 Benz’s
I have to say, this channel is my favorite to just listen to on morning runs! I appreciate you man!
1:13 the LS 2 is down 25 hp on the hemi, and although the LS 2 has a SLIGHTLY milder cam, it does have 0.7 points more squeeze. It's the heads.
Would love to see some videos on modding 6.1’s… taking complete advantage of the forged crank and belting out some really hot numbers sounds great!!!
What he said about boost is semi-correct. You can run about 8psi and be safe. At 8lbs, you're gonna be making about 520whp with no supporting mods on 93. You can run that on the stock motor and be safe.
For an N/A route: headers, ported heads/intake, throttle body, cam, and e85 will get you to about 470whp.
@@SRTBOAT ok, minus the 20 percent loss my srt8 is putting 385 hp to the asphalt… 470 with a tune? I’m not getting that
@@scw19762011 There's no possible way you're only putting down 385whp if you're FBO, cam, port work, and e85.
That's a fully built N/A setup minus a stroker kit. Depending on the tuner and how good your port work is, they could get you 470+ whp with upgraded injectors and added timing on the e85 tune.
If you're only making 385whp right now, then I'm guessing you have an intake and a tune, maybe headers. Nothing big.
@@SRTBOAT fbo would do more than 100 hp. Hands down
@@scw19762011 FBO as an N/A version wouldn't. It's still on stock 6.1L displacement. You can do everything to improve airflow and get a more aggressive cam with better fuel, but you wont make 500+whp all motor unless you stroke it.
Can you do a vid between Forced Induction & N/A v8 Engines. Like the best ones made. That would be dope asf
Best boosted motors would be the 6.2 Hellcat motor, the 5.2 Predator, the 3800 in the GN, and the LS9.
N/A there’s a LOT of options but to me personally it’s the LS3, the Coyote, the 6.0 LQ9, 5.2 Voodoo, and probably the LS1 for basically becoming the beginning of modern muscle again.
I like that you balanced your assessment. Great video. And the comparisons were spot on.
Your channel has such great content! Thanks for sharing bro.
Not a Mopar fan like that but I always liked the 6.1 and I was wondering what combination of parts was used for the destroked 6.2 S/C. Great video
The Apache engine block 6.4l was used from the ram 2500 trucks for the hellcats. A similar cylinder head design from the Apache was also used but technically they are different materials. That’s about the only parts used from the 6.4l. Everything else is unique to the hellcat engine.
6.2 is not destroked from anything.
5.7's stroke, 6.4's bore
They're such good engines my buddys Hellcat is on its third motor at 38,000 miles. They're definitely known for going pop.
I have a friend who's a technician at a dodge dealership...he has a whole different perspective on these engines...
@tyrone reed
I'll stick to my two to three thousand horsepower turbo Trans Am or my Turbo 4 by 4 Silverado that makes 1400 wheel horsepower. LS power. I live in the drag racing world, and I can't tell you how many of these hellcats that I've seen their Motors pop
Extremely interesting video breaking down the srt engines.
I love these videos bro! Very clear and informative!
This truly must be a trick question? We all know a certain liter of the SRT engines make good power stock. The problem comes in when you want to add more power. You can't just strap a turbo/SC on it like a LS or Coyote motor. You have to change the internals which is very very costly.
Most gear head's know you can take a junk yard 5.3 or 4.8 LS and strap a turbo (your choice of forced induction) and make 1000hp without changing the internals. You can do something similar to the K24-A2 (can't forget my honda guys). You simply can't do that with a SRT, well maybe the Hell kitty motor, even that's a risk.
When it comes to any major power with SRT motors if it isn't already boosted (SC) you aren't going to make a lot of HP stock. With the 6 liter motors you can change the upper and lower pulley to make more power, which is great. In comparison to the Coyote, you can simply change the blower to a V3 and make well over 1000hp without changing internals. Which is more cost affective than changing out the very costly internal upgrade to the SRT.
🏆
5.7's and 6.1's responded very well to camshaft replacement. The Eagle variants even more so. Making over 500hp at the crank on a non-eagle Hemi isn't hard at all with the correct cam and tuning. So if you're looking for a boosted engine, the LS is the obvious choice on cost alone. If you're wanting to do an all-motor build, the Hemi is an excellent platform but also responds quite well to boost. The early 5.7 with an opened up ring gap can make 800+ on an otherwise stock engine with a turbo.
@@sHoRtBuSseR true, they're one's out there. Although it comes down to cost. Once you have to open that thing up it'll cost at least 7k. At that point it'll be easier to get a $300-$500 junk yard 5.3 LS and get a precision turbo, for much less that it cost to put those o-rings on.
@@eamorrison859 you can gap the stock rings and be into it under 300 bucks including new head bolts and gaskets.
It's not a problem, change the internals... You can't cry because a company didn't design its engine to handle 3x factory power
Actually stock 6.1s have been known to go up to 11 psi of boost sbe. It's the second most stout engine for boost and mods next to the hellcat
A guy in Houston had a stock 6.1 jeep which he only took apart to gap the rings properly and at the time he had 1000+hp on 16 psi
Richard holdner has a video where he make well over 1000 hp with a 5.7 on boost from a junk yard simply with gapping rings. If they are gapped right glory runs can be made but really it make’s sense to get forged pistons drop the compression for boost due to longevity. And while your at it cam it. Cylinder pressures become an issue on boost in the higher compression range because the cars are heavier dodge needed an edge but equally works against you for boost working with a higher compression motor this is why the hc is so popular.
Nicely done video. Informative and it keeps moving at a good pace.
Great vid man! It was unbiased and informative! Well done sir!
Waiting for someone to say 2JZ 🤣
The 392 really doesn’t make 25-30hp more compared to the LT1 or the 5.0 considering all the cars dyno within 5-10hp of eachother.
Actually most dyno’s I’ve seen of bone stock LT Camaro’s and Challenger 392’s put them right about a difference of 20RWHP… At that point though your issue is with the drive train and not the engine since crank horsepower is a 1:1 figure.
Ford Mustang GT 460hp, chevy camaro SS lt1 455hp, scat pak 392 485hp. Even if they are on a dyno they would be very close not 5-10hp difference more like 20whp because the 8 speed trans in those is quite good even though they are lacking 2 gears.
@@joshreynolds729 Ive seen most 6.4 L dyno around 430whp and I’ve seen 10 speed 5.0s dyno at 430whp, but for most part 6.4 should have higher numbers. There’s a guy on CZcams with a stock 392 with shorty headers and intake no tune. He dynoed 472whp on mustang so that’s like over 500whp on dynojet. Don’t ask me how lol. And it shows on the street when he races.
@@boostidavis I’ve scene some cars that just put in work better than the rest on a dyno not all cars are created equal. Scene dynos vary quite a bit as well. In either case it’s a good time for a v8 powered muscle and the fact they are so much better than they used to be. See we could be arguing over a 5.7 hemi vs a 3v mustang 🤣 so life is good. Both amazing platforms.
You do know the dynos show power and torque AFTER drivetrain loss, right? I really hope you do. You still have time to delete this.
Awesome video brother!! Informative and great to watch.......great editing!!
Love the positive spin instead of saying why something sucks! Keep it up brother!
Exactly
I bought a Ct6v , love the power and comfort, wish there was more detail on this motor . Also the factory dealership guys know almost nothing . About what they sell on this . Please do a synopsis, thank you !
I have the predecessor, the STS-V as well as a XLR-V. Both share the LC3 4.4L Supercharged. Little is known about these
My dad had a 2009 Challenger with the 6.1 and while we didn't have it too long after he passed, not one problem with it at all. It also didn't feel like a typical sports car inside, it had a nice black interior with the seats thick enough to make reaching to the floor behind them just impossible. I guess that is a problem in many cars really. It is the first thing that comes to my mind when someone wants me to reach behind me and get something. The only thing I dislike worse is trying to read a book or anything inside the car because it nauseates me. It doesn't bother me reading anything at all outside the vehicle but try to get me to read a lot of paper in the car and be prepared to have your interior a mess!!!
you suffer from motion sickness, my lady gets the same whenever she takes her eyes off the road on curvy ones, driving or passenger
How the video is set up is interesting. I like how it transitions without losing track of what he’s talking about
Wow that was thorough! Much props bro
You can push 8lbs of boost out of a 6.1 and be fine. I'm currently on 6psi with no issues. I'll definitely be getting forged pistons and rods when I upgrade pulleys though.
Yeah when he said the 6.1s don’t take boost well I was a bit confused since they take it far better than the 5.7 and 6.4 but oh well
@@dmoney6633 yeah it's pretty common for 6.1s to run 600whp on a blower, cam, and some basic bolt ons. All on the stock internals and they run great.
Love these educational videos!! Let’s see something from you about the VQ engine or maybe VQ35/37 and VR30. Would like to see reasons why people use the VQ for tuning and roll racing.
The VQ35 had good torque stock, but generally don’t hold up. Ringland issues and rarely make more than 600hp without being forged etc. G35 was a beautiful car when introduced in 2003. I had a 6MT with Brembo package. Loved it. But the car had several issues including the infamous syncro problems in the transmission.
@@jigsaw3334 oh yeah had a pretty nice 07 Altima with a VQ 6MT pretty peppy but after fucking with it too much it wound up not going into 2nd and 4th and it smoked (blown head gasket) decided to let it go. They’re fun when done right I can say that.
People use many motors for tuning, there's no specific reason. Its a good motor that you can make power with. Nothing more to say. I had 05' Altima SE-R. She was a bad bitch. Traded it in on a truck. Every man needs a truck.
@@Mach141 ehh 6.1 seconds from 0-60 isint bad bad but I guess for the times it was pretty fast
When the most basic version of the motor requires 16 spark plugs, something went wrong early in the design process
That was VERY informative my guy! Take this sub!!
Those srt4s kept up with the v8s and still do. Love it because it’s the same Mitsubishi 4 cylinder
It's actually not a Mitsubishi motor , only the TD04 is Mitsubishi.
@@7Logik idk man I had a 97 gs eclipse and it looks really similar to the srt4 engine just smaller displacement and no turbo.
Awesome video and excellent explanations! It would be nice to see a comparison of the Nissan SR 20VVL versus the regular SR20 DET
or the sr20 and the honda k20
Appreciate the content you make dawg. Wish I had this much knowledge on me. I’m getting there tho. Keep rising
Switching to ZF transmissions saved Mopar. Smartest move they ever made.
I absolutely love my SRT'S. 14' SRT Jeep, 15 Hellcat, and 16 SRT 392... That being said I have some bills from the dealership that would make anyone reconsider a 392. On my Jeep I dropped almost $20,000 in under a yr in the service department.... They are fun but definitely not a long-term vehicle....Currently looking to get a new ZL1 Camaro. Can only take soo many hits before switching teams!!!
Can only assume that's 20k usd? What services cost that much? Had mine for 2 years and do my own services..maybe $500 aussie dollars annually. I need the jeep height clearance, cant think of another vehicle to replace it with.
Lol, that's why every one eventually goes ls
another great video. If money were no object it would be fun to have Fords, Chevys, and Dodges all with their best engines.
Great content. Kept me glued to the screen. Keep up the great job.
I did your final option you talked about
Got a 5.7 RT and built the hell out of it with a 233 cam and a 408 stroker (as well as many other items)
Its fun watching coyote guys jaws drop when they not only cant catch me but I keep pulling away from them with ease.
The 6.1 is a completely different engine to the 5.7. Almost no similarities apart from both being V8 3rd gen hemis.
Great channel man. I subscribed. Interesting stuff!
Love such technical videos 🤙🏼 props to you sir
Thank you for the advice on upgrading the 5.7! I love the 300s and since they don’t make srt models for them I’ll just have to look into what you said!
Seen too many Corvettes and civics gap the 392 and hellcat
No you haven't
@@Welcometofacsistube Exactly LOL
Did you take your medication 🤣🤣🤣🤣🤣🤣
Shout out to this brotha here. Expertise is on point.
Dude these explained videos are so clean with the editing and the explanation
Finally someone that knows what they talking about, great content chief you're doing great
Would like to see more about the NorthStar 32 valve V8. I know alot of people wouldn't care about it. I just want to know why GM went with this engine in some of its vehicles instead of the LS motor
I think it was supposed to be more efficient but sadly it had issues with the heads lifting I believe
They wanted to he fancy
The North Star was an overhead cam engine whereas the LS is a pushrod engine. The LS has great low end power, but the North Star can rev a lot higher and makes peak power in a much different area of the range. If you can fix the head gasket issue they're actually great engines.
Northstar are poop soup try doing a starter on one lol
It was a semi popular and cheapish upgrade back in the mid 00`s for mustangs. We had one we were going to build up and put into my then new 02 gt, never did it though. But in stock form they were crappy for enthusiasts
Something that Hot Rod Magazine stated when they first disassembled this motor and found these engines were built for racing. Excellent video
What an awesome video with such good and awesome explanation and details.
Love this video, KEEP IT UP!🔥👉🏼
RIP to the Chrysler 300 SRT8 last year alive was 2012 i think.
2014 was the last year (US and canada) it’s still made today but for different markets
@@iwishigaf It just aint right that the heavy Chrysler 300 no longer offers the V8 variant here for those who want it. I guess most people here in the US dont care about performance so the V6 is the bread and butter. The Pentastar V6 is a nice N/A 6 cylinder but the 300 needs as much torque as it can get.
2014. One sits in my garage
@@e46m54nissansr20937 the npc buyers don’t appreciate the boss mafia style the SRT 300 provides. Me on the other hand wants one!
@@iwishigaf Right
Simple:
If you can only drive in a straight line and cannot build, get Mopar. Nothing wrong with that. If you can drive Circuit and a more into building your power. Get a Chevy. Both have their benefits.
Brutha you should've BEEN GETTING VIEWS like this!!!!❗❗❗❗💪🏾💪🏾👍🏾 KEEP GOING UP BIG DAWG!!!!!💪🏾💪🏾
Holy cow this video is fantastic! So much knowledge! I’m sending this vid to all my car bros!
I've bought two 5.7 and both were blown up at around 100k...not very reliable engines. Also very expensive to rebuild and buy parts to.
Wow! That's a lot of learning in a short video.
The more you know 🌈
Wow very detailed explanations... on point 😎
Watched the hole video through the preview . Had to stop by and show love