Fairmont 7 - swap engine / trans / fuel system
Vložit
- čas přidán 9. 09. 2024
- bunch of things happening, i guess we're moving into setup 2 a little early haha.
ly6 - motor
6l80e trans
ly6 - torquestorm
ly6 - FPs485 torquestorm twincharged
i have a solid 8.8 at a friends house i need to swap in also, gotta get it first.
=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-==-=-=
Check out SloppyMechanics.com for links to commonly used facets of sloppy.
check out our shopify store
www.sloppymech...
if you would like to send things,
and you most certainly do not have to,
but if you are feeling inclined to do so!
please mail to:
Matt Happel
175 N Chestnut St
PO Box #142
Bath PA, 18014
----------------------
Check Out Sloppy sponsors and discount codes from them!
Monkey Fab MFG - (monkeyfabgarag...)
Discount Code "sloppy" for 5% off most items
TorqStorm Superchargers
torqstorm.com/
Snake Eater performance (www.snakeeater...)
Discount Code "sloppy" for 10% off entire store
Reversion Raceworks - Dash Inserts and more
/ reversionraceworks
Use Code "SLOPPY5" to save 5% on whole store
Hunter Tuned - www.huntertune...
Mostly centered around honda parts
use discount code "SLOPPY" to get 10% off
Lowdoller Motorsports - lowdoller-moto...
Discount Code "sloppy" for 5% off the store
Codion Motorsports ( / codion-889312128079667 )
Forced Performance - (forcedperforma...)
Hughes Performance - (www.hughesperfo...)
Holley performance (www.holley.com/)
LSX Specialties ( / lsxspecialties )
Dirty Dingo Motorsports (www.dirtydingo....)
Summit Racing LS (www.summitraci...)
Brian Tooley Racing (briantooleyrac...)
VS Racing (turbo4less.com/)
Warr Performance (warrperformanc...)
ICT Billet (www.ictbillet....)
Can you add the creepy hand pointers to the store.
We need more of these rambletron videos
Your going to be shifting like the fast n furious going down the track with that green gem. The Fairmont brought the fun factor back.
I think the 6l80 gets it's bad reputation from the failures in the trucks. Too high fluid temps, torque converter lock up in 3rd gear and with AFM/DOD it always seems to be slipping it. I have one at the shop right now for a trans. With the aftermarket controller you should have better results
Most have tiny coolers also.
I tuned out the slipping in my van, they slip 10-30 rpm in every single gear. Coupled with inadequate fluid changes = a bad time
I'm gonna scratch it right now...
That is some Doug Bernards level whistling :D
There is only like 4 of us who knows who he is... Lol😊
Happy Birthday!
I watched, I liked. I commented. Happy Birthday, Sir.
Just now watching on the day of your birthday, so happy birthday buddy, hope you had a great day!!!
Happy Birthday. Thanks for making me laugh and sharing great content over the years.
Happy birthday brother , wish you the best
Question, why won't you go, Holly hydromat and a internal aromotive
Happy bday! Fwiw those check valves don't flow much at all. Can't wait to see it rip with a 6L behind it.
Happy Bday Boi!
our garages looking about the same… LS blocks n heads all over the place- Viva La Shitbox revolution! 🤘🏼
Happy Belated Birthday Matt !!!
i went with Circle D like 7 or 8 years ago when you were talking about it and i could not be happier! IN an off road truck, 3400 stall
🎉Happy birthday
Ive been running E85 through their brushless external and have really liked it. Ran on straight low speed until I needed to turn it up and am now using the PWM referenced with boost. Working well even though it recommends 500hz minimum, it works fine with the max fueltech will do of 300hz.
When I first installed it I easily snapped off one of the studs and they repaired it for me quickly. Give them a chance to work it out maybe.
Mines also went through some gurgling after draining tank or sitting for a while and never has caused an issue.
Happy Birthday 🥳
happy Birthday Matt
Happy Birthday Mott. Enjoy!
Happy birthday Matt
That 5.5L is fantastic I love mine in my truck!
Oh shit, 6L80E sloppy R&D. Can't wait to see the results
Happy birthday ‼️
Matt Vanderhoof Happel 🤣
I am planning on using Fuelabs largest controllable pump on my build. Hopefully, it doesn't fail, think they have a lifetime warranty.
Happy Shloppy Birthday
I didn't see mention of any lock up adjustments for the 6l80e controller on Holley's video OR page, Can you confirm it's adjustable? Id be VERY disappointed if you couldn't make adjustments and it followed the terrible OE lock up strategy that kills the converter....
Very glad to see your use of surge tanks !
Just use pumps with check valves, don't add complications and possible failure points with external check valves...
Good info ❤
Good stuff Matt, happy almost Bday buddy!! I"m running dual in tank Walbro 450s in my 98 Tacoma LS turbo swap. I'd love to find a way to control them with a PWM signal so they arent going full bore all the time possibly even heating the fuel unnecessarily.. And since I am using a Terminator X I dont have enough I/O to split them up unfortunately.
If I had to do it over again I would just buy a damn Dominator!! Oops.. When I redo my 67 Camaro thats what I' going to do on that one, lesson learned I suppose.
I've got to do some research on using the Can bus setup that will allow additional I/Os with the Terminator. Unless you have those that you were testing available for sale?? If so sign me up and take my mulah!
Kool stuff. Too bad the Fuel lab pump died, I too was looking forward to seeing how it worked out.
Me too
@@SloppyMechanics what rear gear are you running with that 6l80?
I’d like to see a cool surge tank setup as my car has an in tank 525 and may one day run out of pump when I turn the boost up.
Happy Birthday Mott!
I've had pretty poor luck with that style of check valve. The Radium ones seem to be a pretty decent and compact design, and i like the Vibrant ones, too.
Those check valves are going to be tight inside of the DW tank. You might be better off buying 2 hellcat pumps. The tank comes with adapters to fit the walbro diameter pumps
I can't wait to see what the tuning parameters for the 6L80e are like in the Holley! It's a bit of a nightmare to tune in HP Tuners...
I just had a Genuine Walbro 525 lph Hellcat pump die on me with less than 2500 miles on it. 🤷♂️. I had run some e85 mix through it, maybe it didn’t like it?
Looking at the V2 535 lph e85 pump as the replacement
Could you make a video installing the 6l80e Holley add on? I got a 90e swap for my truck but just been stuck on some of the wiring for my old truck.
do we really share a birthday??? HAPPY BIRTHDAY!!
Yes very cool
Can we get a mustang update video too
Do you still do a build thread online anywhere? Would like to follow along like used to on ls1tech back several years ago
No sir not really
have a 06 gmc van with a broken flexplate. does the 6l80e flexplate fit the (4.8) 4l80e? do you have a link for the flexplate matt? Happy sloppy birthday!
What rear gear are you running with that 6l80?
For now it’s a 3.73 I was always curious how they would drive and do with the shorter gears. Then I want to move it back to 3.08 or something
Can you ls swap a 2010 tundra?
Holley has a 6L80e controller now?
Yes. Add on module for Term Xmax
70 amp ssr ?
LOL fuel lab have been failing regularly since 2009…..
Is your bday the 28th or Sept 1st?
Aug 31st
Mine was yesterday, the 28th...I was hoping we shared the same. Well happy early bday sir!! I'm sure we can all say thank you for your services king slopp!!! (Does a kirtsy)😁
Do you even lift bro?
Never mind, just saw the 2 post.😂
Happy birthday!