Project - AMD Ryzen 7 5800X / MSI MAG B550 Tomahawk - PC Machine 2022

Sdílet
Vložit
  • čas přidán 29. 01. 2022
  • Nach zehn Jahren wurde es Zeit, einen neuen PC zu bauen.
    Der Alte Intel Core i7-3770 auf dem ASUS P8Z77-V LX Board hat bis heute zuverlässig seinen Dienst verrichtet.
    Unterstützt wurde er hauptsächlich für Multimedia , Videoschnitt und Office Anwendungen, durch die Grafikkarte ASUS GT640 und 16GB Kit G. Skill RipJaws X DDR3 1600 RAM.
    Das ist nun Geschichte !
    Der Neue ist mit einem AMD Ryzen 7 5800X auf einem MSI MAG B550 Tomahawk Board ausgestattet.
    Unterstützung bekommt er von der GPU Palit GeForce GTX 1050Ti Storm X und dem G.Skill RipJaws RAM 32GB Kit DDR4 3200MHz .
    Die CPU wird vom Scythe Mugen5 Rev.B leise und sehr gut gekühlt.
    Die System Festplatte ist eine 500GB CRUCIAL MX500 2,5" SSD und für die
    Daten eine 1 TB Kingston A2000 NVMe M.2 2280 SSD.
    Übernommen wurde meine 2TB Western Digital HDD aus dem alten PC.
    Als Backup Laufwerk, wird nun die ehemalige System SSD aus dem alten PC benutzt, eine 128GB Samsung SSD 830.
    Als Disc Laufwerk wurde der alte LG Blu-Ray Brenner BH 10LS38 verbaut.
    Als Energiespender hat er ein CORSAIR RM650 650W Mudulares 80+ Gold Netzteil bekommen.
    Alle Komponenten fanden Ihr zu Hause in einem be quiet! Pure Base 600 Case.
    Das komplette System läuft sehr stabil und ruhig mit Windows Home 64Bit.
    Vielen Dank für Ihre Aufmerksamkeit.
    After ten years it was time to build a new PC.
    The old Intel Core i7-3770 on the ASUS P8Z77-V LX board has done its job reliably to this day.
    It was mainly supported for multimedia, video editing and office applications, thanks to the ASUS GT640 graphics card and 16GB Kit G. Skill RipJaws X DDR3 1600 RAM.
    That's history now!
    The new one is equipped with an AMD Ryzen 7 5800X on an MSI MAG B550 Tomahawk board.
    He gets support from the GPU Palit GeForce GTX 1050Ti Storm X and the G.Skill RipJaws RAM 32GB Kit DDR4 3200MHz.
    The CPU is cooled quietly and very well by the Scythe Mugen5 Rev.B.
    The system hard drive is a 500GB CRUCIAL MX500 2.5" SSD and for the data a 1TB Kingston A2000 NVMe M.2 2280 SSD.
    My 2TB Western Digital HDD was taken over from the old PC.
    The former system SSD from the old PC is now used as a backup drive, a 128GB Samsung SSD 830.
    The old LG Blu-Ray burner BH 10LS38 was installed as a disc drive.
    He got a CORSAIR RM650 650W Mudular 80+ Gold power supply for energy.
    All components found their home in a be quiet! Pure Base 600 case.
    The complete system runs very stably and quietly with Windows Home 64Bit.
    Thank you for your attention.

Komentáře • 20

  • @MrLazer44
    @MrLazer44 Před 2 lety +4

    put a bit less of thermal paste bro :) good setup

    • @Fixivideo
      @Fixivideo  Před 2 lety

      thanks for the tip👍 all good, don't worry✌

  • @kyler7428
    @kyler7428 Před rokem +2

    I built my first pc with this mother board and the ryzen 7 it turns on but it won’t connect to my monitor do know what the problem could be?

    • @Fixivideo
      @Fixivideo  Před rokem

      Do you have a GPU? Because the 5800X does not have an integrated GPU!

  • @iish4d3ii84
    @iish4d3ii84 Před 2 lety +4

    Yo, nice vid. I have one question. Did you have to update/flash your BIOS for the Ryzen 7 5800X?

    • @Fixivideo
      @Fixivideo  Před 2 lety +2

      Hello, yes, as a precaution, I flashed the UEFI / BIOS before starting up. Worked with the MSI motherboard BIOS Flash Button and USB stick without any problems.
      www.msi.com/Motherboard/MAG-B550-TOMAHAWK/support#down-bios

    • @iish4d3ii84
      @iish4d3ii84 Před 2 lety

      @@Fixivideo Alright, thank you for your quick response. Another question, do you need to do that? Because the package of the MAG B550 Tomahawk is labeled with something like "AMD 5000 Ready" on the front. At least mine was.
      At the moment im building a PC with the mainboard and 5800X and i did read that you need to flash the board before installing the cpu (Posts were from 2020 or so). So i tried. But since it is my very first time building a PC i think i did something wrong so that the board wouldnt recognize the cpu anymore. Long story short i returned the board and the CPU and ordered them again. So the finall question ... do u need to update the bios? :D

    • @Fixivideo
      @Fixivideo  Před 2 lety +1

      @@iish4d3ii84 Well, for me, it was also the first self-made PC and I studied how to do it on CZcams beforehand. It might be possible for the motherboard to recognize the CPU without a BIOS flash, but since I didn't know if the motherboard already had the latest BIOS, I flashed it first. Videos of the flashing process can be found on CZcams. I downloaded the BIOS update from MSI and put it on the stick, you have to rename the file beforehand, otherwise it will not be recognized when flashing! But there are also videos on CZcams!
      Here's an example.
      czcams.com/video/rTBs0-gTJRI/video.html&ab_channel=GlennBerry
      I hope I could help you, have fun with your new PC!

    • @Fixivideo
      @Fixivideo  Před 2 lety +1

      Hallo, habe gerade auf deinem Kanal vorbeigeschaut und gesehen das du der deutschen Sprache mächtig bist😄 beim nächsten mal also ohne Google Übersetzer😂✌ wie schon gesagt, es gibt genügend Videos auf CZcams mit den man sich Schlau machen kann, bei mir hat alles bestens funktioniert!
      Tipp für Lau: czcams.com/video/XhSjq98XNhY/video.html&ab_channel=Rawiioli

    • @iish4d3ii84
      @iish4d3ii84 Před 2 lety +1

      @@Fixivideo Ja, habe ich auch auf deinem Kanal gesehen, dass du wahrscheinlich deutsch bist, leider nicht sofort. Sonst hätte ich mir das an einigen Stellen mit dem Google-Übersetzer auch gespart :D
      Wie gesagt, hatte ich ja schon das Board und habe mir auch Videos dazu angeschaut und das Benutzerhandbuch gelesen. Nur flashen wollte er nicht so richtig. Ich habe mir auch alles bzgl. USB-Stick etc. durchgelesen ... FAT32, Datei in "MSI.ROM" umbenennen usw. Nur die Status-LED hat nie aufgehört zu Blinken. Ich bin einmal nach 40 min. wiedergekommen und die war noch immer am blinken, obwohl dieser Vorgang eig. nur ein paar Minuten dauern sollte.
      Aber gut, ich werde die CPU versuchen einfach so einzubauen. Vorerst ohne irgendwas zu flashen :D

  • @abitfishy1561
    @abitfishy1561 Před rokem +1

    Did your motherboard box have “Ryzen 5000 series desktop ready” on it or something, cos I am doing the same build and have that sticker, so I don’t know if I need to update it or not

    • @Fixivideo
      @Fixivideo  Před rokem

      Just try it, usually boards that are sold now are already equipped with the latest bios and are therefore Ryzen 5000 ready. If not, download the latest bios from the website and put it on a USB stick, then it's very easy to write to the board✌️

    • @Fixivideo
      @Fixivideo  Před rokem

      czcams.com/video/eNi0Y0CFDEI/video.html

  • @zo_to
    @zo_to Před 2 lety +3

    Good job bro, I have a question, how is the temperature of the motherboard with this processor, is it stable?

    • @Fixivideo
      @Fixivideo  Před 2 lety +1

      The motherboard is stable, no problems. The temperature is around 30 degrees Celsius with the standard case cooling.

    • @zo_to
      @zo_to Před 2 lety

      @@Fixivideo Oh good, how much did it cost?

    • @Fixivideo
      @Fixivideo  Před 2 lety +1

      @@zo_to www.mindfactory.de/product_info.php/MSI-MAG-B550-Tomahawk-AMD-B550-So-AM4-Dual-Channel-DDR4-ATX-Retail_1365979.html

    • @zo_to
      @zo_to Před 2 lety

      @@Fixivideo
      thank you bro

    • @Fixivideo
      @Fixivideo  Před 2 lety

      @@zo_to ✌️