I have the same system... the GOLD series... same system just different bypass valves. ANY ADVICE for when water seems to constantly drain out the drain even after I just replaced all the main piston seals? THe motor is in home position it runs a regen etc but like I said water just constantly drains causing $400 a month water bills if not bypassed 24/7... any advice?
If a power outage occurs, should the Water Softner immediately bring itself back to normal once the power is back on? This happened to us last week, and it started flushing once power came back on, but now it is quiet, and the time is simply blinking. Does this warrant doing a hard reset as the video showed? Or simply restoring the correct time is sufficient? Thanks in advance.
I have this same system and after we refilled the salt tank it keeps beeping and telling us it missed the rinse. Any idea how to get this to stop beeping?
The only problem that i have it keeps doing hissing noise coming from top of the motor unit any idea how to stop it , or what's wrong with it i try reset tome lod eor unplug it and plug it back it all started it after power went out please help .
Mine was stuck on backwash. Probably for hours. It’s a Sunday night. It was flooding my yard and wasting tons of water. The dip switch trick worked, but it wouldn’t refill the brine tank and went back to backwash. Also my bypass valve is stripped. I ended up cycling the motor around and turning it off again midway. It’s keeping the cylinder in a spot where it’s not backwashing at least until I can get a tech out here. I’m about done with this piece of sh*t.
I don’t know sir. I’m a Culligan customer with no expertise. I filmed a Culligan technician doing a reset on my system and thought it would be helpful. Sorry.
I am a customer of Culligan and I filmed the technician doing the reset. I’m sorry but I don’t have any subject expertise so I don’t have the ability to answer any technical questions.
This info saved us after a recent power outage. Just great detailed and clear information. Phew! THANK YOU!!!
most useful bit of information ever shared by a culligan tech
Thanks for the video.... I was stuck in a regen cycle and switching that little switch from the motherboard helped me out.
GREAT VIDEO THANKS !
thank the vedio, it really help.
If you want to fix it correctly, throw it in the trash.
Bought a new system for half the price, oh and it actually works!
glad you asked that question
I have the same system... the GOLD series... same system just different bypass valves. ANY ADVICE for when water seems to constantly drain out the drain even after I just replaced all the main piston seals? THe motor is in home position it runs a regen etc but like I said water just constantly drains causing $400 a month water bills if not bypassed 24/7... any advice?
Ty
will that dip switch clear all errors? im looking for an error 3 video.
If a power outage occurs, should the Water Softner immediately bring itself back to normal once the power is back on? This happened to us last week, and it started flushing once power came back on, but now it is quiet, and the time is simply blinking. Does this warrant doing a hard reset as the video showed? Or simply restoring the correct time is sufficient? Thanks in advance.
My softener has water that keeps running. Will switching the dip switch off and on fix it? I turned the water off for now via the bypass valve.
what happened Robert it's been a year?
I did everything in this vid and my water softener still won’t work. Any help would be greatly appreciated.
How Dow you change the am to pm?
I have this same system and after we refilled the salt tank it keeps beeping and telling us it missed the rinse. Any idea how to get this to stop beeping?
I’m having the same problem, did you find a solution
The only problem that i have it keeps doing hissing noise coming from top of the motor unit any idea how to stop it , or what's wrong with it i try reset tome lod eor unplug it and plug it back it all started it after power went out please help .
They should come with back-up battery installed.
Helped my Err 1h error
Mine was stuck on backwash. Probably for hours. It’s a Sunday night. It was flooding my yard and wasting tons of water. The dip switch trick worked, but it wouldn’t refill the brine tank and went back to backwash. Also my bypass valve is stripped. I ended up cycling the motor around and turning it off again midway. It’s keeping the cylinder in a spot where it’s not backwashing at least until I can get a tech out here. I’m about done with this piece of sh*t.
My exact Culligan reads err 2. Do I need to change the motor on it?
I don’t know sir. I’m a Culligan customer with no expertise. I filmed a Culligan technician doing a reset on my system and thought it would be helpful. Sorry.
I wish they has a manual for this because .......i do not know and have to call service every time.
They do that so that it will be a cost for them. Which is a business wise decision.
So mine continuously ran and I found out the water level sensor had been unplugged FYI. Just another scenario
I am a customer of Culligan and I filmed the technician doing the reset. I’m sorry but I don’t have any subject expertise so I don’t have the ability to answer any technical questions.
Why error 2 the culligan?
Looking for an err 2 video
Every found a video. I have error 2
I came here hoping to find the reset button …
I’m sorry, I’m a customer that filmed the process. I have no expertise.