The REAL reassembly "trick" is to push down on the front of the slide. Zoom in and slow it down and you will see the take-down tabs move. Without the recoil spring, it's easy. With the spring it is impossible if you don't push down.
Good to see some Aussie X Cal enthusiasts. What are the lightest recoil loads you guys have been able to get? For me anything I need at least 3.6gn of aps450 or I get issues with stovepipes, jams etc. Anyone got any ideas? Lighter springs etc?
Hi, When the pistols run in you can often put in a bit lighter spring and this can help. But the 9mm round can become much less accurate if the loads are light. I have done a lot of testing of 9mm ammo in a 9mm rifle with scope and have proven that the 9mm is most accurate with full power loads. Try heavier projectiles as well sometimes this helps.
Some pistols have firing pin locks and some don't. Grand Power firing pin is short so that with the hammer down the firing pin won't touch the primer. If you carry the pistol cocked then yes this can be dangerous. But with the hammer down it is safe and you don't need to carry the pistol cocked as it is double action.
worse freaking gun on the planet for disassembly and assembly. it might get cleaned once a year if that. and stupid grip strap design.day later and still can't put this junk back together.
Great explanation, once you figure out how it works and how it rotates it makes reassembly a breeze
Nice looking pistol, unusual way the it moves.
Great explanation, pick mine up this week and I will practice using your clip as reference. Thanks!
The REAL reassembly "trick" is to push down on the front of the slide. Zoom in and slow it down and you will see the take-down tabs move. Without the recoil spring, it's easy. With the spring it is impossible if you don't push down.
Thanks you from France, i have try to reassembly with not sucessfull before i look your vidéo. Good day
Glad my video could help you! When you understand the correct way to position the barrel, reassembly is easy.
Regards, Ozziestraightshooter.
Damn, it's still really hard for me lol. Takes like all of my strength. Must have weak hands
Good to see some Aussie X Cal enthusiasts. What are the lightest recoil loads you guys have been able to get? For me anything I need at least 3.6gn of aps450 or I get issues with stovepipes, jams etc. Anyone got any ideas? Lighter springs etc?
Hi, When the pistols run in you can often put in a bit lighter spring and this can help. But the 9mm round can become much less accurate if the loads are light. I have done a lot of testing of 9mm ammo in a 9mm rifle with scope and have proven that the 9mm is most accurate with full power loads. Try heavier projectiles as well sometimes this helps.
Hi. Gran power don't have firing pin block!. Is this dangerous or bad?
Some pistols have firing pin locks and some don't. Grand Power firing pin is short so that with the hammer down the firing pin won't touch the primer. If you carry the pistol cocked then yes this can be dangerous. But with the hammer down it is safe and you don't need to carry the pistol cocked as it is double action.
@@ozzistraightshooter9273 thx for your time
worse freaking gun on the planet for disassembly and assembly. it might get cleaned once a year if that. and stupid grip strap design.day later and still can't put this junk back together.