YAESU FTdx10 External Monitor,SAFE,NEW & CHEAP!(FT710/FT101)
Vložit
- čas přidán 7. 04. 2023
- YAESU FTdx10 Safe External Monitor,NEW & CHEAP!
After reading about the horror stories regarding this radio as well as the FT 101D and maybe the ft710 i thought I would try and take the risk out of using DVI-D to HDMI Converters and source a DVI monitor that wasn’t expensive but still readily available.
Here is the link to the AOC Monitor from Amazon:
amzn.to/43hCAeb
#yaesu #hamradio #subscribe - Věda a technologie
I have my ftdx10 for over a year and love it. I have a32 inch monitor and it looks great.
I still enjoy this radio too, it has never missed a beat. Thanks for visiting the channel.
I have add mine for 6 weeks now, great value, and its safe. Happy days.
It sure is Steve,Thanks for taking the time to comment.
Thank you ! This video will probably save many from the problem ! 🙏 . Yaesu besides choosing a stupid Video connector (although mechanically much better than HDMI !) totally screwed up the job electronically ! but worst of all is the LACK OF ANY INFORMATION ABOUT THE DANGER OF CHIP DAMAGE ON THE MAIN BORD IN THE FABRICALLY CONNECTED MANUAL ! . Great radio ! and here such a blunder . Greetings GL & 73 ! 👍👍👍👍
Yes it has probably caused them more problems than it’s worth and literally for the sake of a few extra dollars/pounds for a HDMI license. Thanks for visiting the channel.
Wow thank you. Just when I was about to plug in my dvd-d to hdmi bi-directional cable into my Sony Bravia…getting the AOC instead.
Good call Sir as it really isn’t worth the taking risk.
yeah Yaesu screwed the pooch when they put the dvi plug on the back. Fancy new radio and old crappy tech plug on back. Why they couldn't install an hdmi on the back I don't know or usb c like you mentioned. Stupidest cost savings ever. 4 k would have been nice too.
It will have probably been down to Yaesu’s greed with the HDMI adoption fee or something like that, crazy i agree.
But Icom did the same thing on the 7610
@@robertgiuliani4405 But the Icom's dont blow when used with a cheap DVI-D to HDMI adapter cable like the big dollar Yaesu's do.
Nice Bit Of Kit 👌
It certainly is impressing me and that normally takes a lot from Yaesu as i was always i Icom fan.
Very nice, I keep saying I'm going to buy a Yaesu FTDX10🙂
Honestly Dave you definitely wouldn’t regret and it is so simple to use.The DNR wows me every time i switch it on.Hopefully I will have the Yagi up next week so that will be a real test.
Using an old LG monitor with my FTDX101MP, used the same with an FTDX10. Both radios benefit a lot from having a mouse connected too, saves wear and tear on the touchscreen.
I was thinking about trying a mouse in the future as it’s a great idea, infact i will do a bit of homework and give one a go.Thanks for visiting the channel.
@@gtretroworld I have only used simple USB mice with scroll buttons so far. It does make the radios easier to use. I believe some have had success using USB bluetooth receivers with cordless mice. 73
@@g0fvt I will have a try with a few and maybe pop a future short video up,thanks 73’s
Thats good to hear VY2JC
Thanks for visiting the channel.
FTdx-10 kill the entire high-end rig and the FT-710 kills the mid-end below. C/P value ... awesome.
You’re right it is a very good radio,thanks for viewing the channel.👍
I agree. It's got the receiver of a 3k USD radio IMHO.
Great vid where and what cable did you use, i had problems locating one! Thanks for your content.
Thanks James,I used the DVI-D single link cable that was supplied with the monitor.Any DVI-D cable single or Dual link will do the job.
@@gtretroworld Thank you looking forward to getting it set up eyes not so hot these days!
@@jamesilott7148 No Problem at all..You will be able to see this from a mile away.
In watching the video, do you have the monitor set on 1920x1080?
Yes the Monitor is 1920 x 1080 but it is displaying 800 x 480 from the Radio.
I use a MSI 32 inch 4kUHD monitor with my FtDx10 and have no issues.
My mate on the other hand is using that exact same monitor you have there and it worked for a few weeks and now the monitor cannot find the input signal from the Dx10.
Are you sure it is this exact model as this monitor will only take a signal from the radio unlike converter cables.Saying that i suppose the monitor could be a duffer.
@@gtretroworld yes same monitor.. he's also tried two cables thinking it may be a duff lead.. the radio is set to on yet the monitor will not receive/pick up the feed from the radio, the monitor is also set to digital receive mode so that's not the problem.. it was when he fired it back up after not using the radio for a few weeks the monitor just wouldn't pick up the radio, we've been trying different things with it like factory setting the monitor to no avail.. he's now thinking the radio is the issue.. I'll let you know how he gets on..
Really strange timing that you put this video up today how uncanny is that.
@@DeltaXray444 I think it could be a different model Monitor buddy in the E2270S series as this doesn’t have anyway to change what you have said.It literally has one button that lets you tweak Brightness,Contrast & language.Check to see if it is the AOC E2270SWDN as there is a few in there series.Also if it’s new i would return it for a replacement before he writes the radio off.Definitely come back and let me know though buddy as i am curious.
@@DeltaXray444 Just noticed you have a radio channel.I will have a proper nose over later for a look.👍
@@gtretroworld I have, I just upload trivial radio related videos nothing serious, thanks and happy Easter to you and your family,
P s.. I'll definitely let you know what the findings are with the situation my friend is having with his 10 & monitor 👍
So do they make a DVI to Hdmi or should we stick HDMI to vga?
To be honest none of the above are recommended other than straight DVI to DVI.
Nice video, is this also possible with a DX1200?
No unfortunately the DX1200 doesn’t have a video output..thanks for visiting.
You can use a hdmi monitor as long as your dvi d to hdmi lead is unidirectional and not bidirectional.
The fuse that blows in the radio is a surface mount and not a conventional type.
You could but those are normally USB powered and most folk won’t be using anything like them.Also by the time you pay for that cable this monitor is not a lot more.
I see recently this fuse issue has been addressed in the FT710 with the use of a Polyphasor resetting fuse as well as a bit of ESD protection.
Definitely not worth the risk. The issue is hdmi straight through cables wont block hdmi bi directional voltage comands that a modern tv might send into the radio. I think some hdmi only monitors might be safe but im not finding out. I called yaesu on my new ft710 and like the 10 they recommended either use dvi d monitors or some sort of multi converter box unit. I picked up a dell 19 inch pc monitor from local goodwill thriftstore $7.49 and a $12 dvi d sheilded 10 foot cable from my local pc recycling store. Ive noticed on my 710 the resolution is ok on monitor but not as sharp as radio. Good video and similar prices in states on amazon. 73 from kg7hvr
As you say it is definitely not worth the risk at all…thanks for visiting the channel.
@gtretroworld cost me less than $20 and i could have waited a day and saved $6 on a cable. If people need more than a 19 or 20 inch monitor i think they need to get their eyes checked lol 😆
@@hamradiohack Mine is more than big enough,probably a little too big.Saying that a few weeks ago for no apparent reason i had a vitreous detachment in one of my eyes so it is very welcome atm lol
@gtretroworld hope you get better soon. Doesnt sound fun.
@@hamradiohack Thanks..It is certainly a different experience having a close to useless eye but apparently quite common with age and I’m told should heal itself.🤞
if it had a touchscreen that would be cool
If only buddy that would be fantastic,maybe one day.
Did you get the cables with the monitor
Yes everything to connect it straight up.
Would it be safe to use a DVI to VGA cable.
A few lads are using that combination so i think it should be fine as there hopefully won’t be any draw from a VGA cable.
After calling Yaesu I found out this has zero to do with cables and everything to do with if your monitor is earthed. Your new monitor is earthed so you will be fine 👍
I would have thought all or most monitors were earthed but it would definitely help anyway.Thanks for bringing this up anyway.👍
@@gtretroworld me too mate, you'll know if you have a earthed monitor cos you'll have a 3-pin kettle flex type cable as opposed to the smaller 2-pin type.
That's looks awesome....I'm jealous lol
It is a awesome Radio with probably one of the best RX i have ever heard.
@GT Retro World what antenna you using with it??
@@greyhound0z Believe it or not the Mighty Magnum still 3ft off the ground.😂
@@gtretroworld I want that radio lol
@@greyhound0z You wouldn’t be disappointed I’m sure of that and cheaper than your Sony A7 in your profile pic.😆
What mouse to use ???
I use a wired Logitech G502 but most wired and quite a few wireless mice will work fine.
Does a Mouse integrate?
Yes it does, I have actually done a few videos regarding the mouse.
@@gtretroworld thanks ..
Now, 4/2024 this monitor is £143! Not cheap for basic monitor you can't really use with any modern devices, all has now HDMI!
Wow that has seriously increased in price since i posted this, thanks for pointing this out. If possible i will try and find a more sensible link.
Try eBay item Number 226059910586, showing 2 in stock £59.99, hope this helps.
WHAT SIZE IS THE MONITOR?
It claims it is 22 inch but it is 21.5 viewable.At that resolution i think that size is more than big enough.I have left a link in the description for the exact monitor.
Yaesu always does weird things.
I think all manufacturers have there kinks in one way or another.Maybe they should have used HDMI and charged us a little more. Thanks for visiting 👍
that monitor wont be good in the US... it operates at 240 volts.....
Good Point Mike,As soon as i am home i will double check on this.👍
Ok Mike I have checked the Monitor and on the Rear it states 100-240V~50/60Hz so it’s all good.👍
@@gtretroworld ok, good to know, because on the Amazon site it says Voltage: 240 Volts..... and thats it!..... apparently someone was distracted by a chocolate bar or something while writing the product description!
@@MikeG-js1jt Amazon are never the best at stating specs but it’s there on the back of the unit.I did think it would be almost universal.Glad you brought it up though.👍
Hello, sorry not sure of your name, but I just wanted to say I bought that exact model for use with the FT-DX10. It works perfectly.👍 One thing I wanted to ask is that on 15m and 10m I get some noise due to the monitor. Have you noticed this issue? I have used one ferrite clip on, but it still quite noticeable. Any thoughts?
Many thanks.
Nik
Hi Nik,No sorry i get zero interference with the monitor,infact up until last week it was perched on top so very close indeed.
I’m getting a lot of noise during the day but that’s off the Solar panels or inverter since i put the beam up but that’s another story.
If you lift it well out of the way does it die down?
@@gtretroworld hi, I really appreciate your comments. To be honest I only bought a 1m DVI cable, so can't really get it too far away. I have only used clip on ferrite so far bit think I might buy some torroid rings and go nuts with them! Lol!
It seems I could have it worse as some people report very high noise with some monitors. This isn't so much noisy, but very noticeable when looking at the waterfall. I am very happy with the monitor though, and like many things ham radio, work around need to be found!! 73 mate, thanks for taking the time to reply! If I find a satisfactory solution, will let you know! Nik
@@nikwilliams4927didn’t your monitor come with a DVI cable as these in my link come supplied with a moulded ferrite on both ends as seen in the video?
@@gtretroworld I didn't get a cable in the box!! I've been had🤣
I bought a generic dvi cable .But that kind of begs the question, did I buy a not very decent one? Maybe I need to look at that before anything else! BTW.. the Dx10..omg..its very very nice!! (But you know that! )😁
@@nikwilliams4927 I would get on to them if that’s the case as they all come supplied with a DVI cable.