BMW X5 Oil Change DIY (2019+ G05 30d)
Vložit
- čas přidán 23. 07. 2024
- Performing an oil change on your BMW X5 is one of the best ways to save money and time servicing your own car. With the BMW G05 X5, you can service it on your driveway in about 30 minutes.
This tutorial shows you how to change the oil and oil filter using genuine parts, then update the servicing prompt on iDrive.
Parts used in this video for an X5 30d:
Oil: 6.5 Litres of BMW Twin Power Turbo 0W-30 LL04 (Part Number: 83212465854)
Oil Filter: BMW Genuine Oil Filter (Part Number: 11427826799)
Chapters:
00:00 Introduction
00:10 Required parts and tools
02:41 Removing the oil drain plug and oil
04:37 Removing the oil filter
06:08 Preparing the oil filter
07:50 Replacing the oil filter
08:56 Replacing the oil drain plug
09:50 Filling the engine with oil
11:37 Checking the oil level using the dip stick
13:49 Resetting the iDrive service prompt in the car
15:28 Checking the oil level in the car using iDrive - Auta a dopravní prostředky
Excellent video, this is incredibly helpful, thank you very much for sharing.
Thanks for the great feedback!
Great job, very clear, explanation, etc.
Looking forward to trying it on my own.
Great job
Nice video
Great video! Oil is expensive, but BMW sell their oil in 20L bulk packs - works out around £35 per 6.6L
I didn't know you could buy bulk packs; I'll have to check that out next time I service it. Thanks.
Not a bad video tbh top job. With the filter buy a mahle filter as that’s what bmw use and will save you £10 as your paying that extra £10 for it to have a bmw box and stamp on box. When fitting the oil filter cap just rub alittle bit of the clean oil around the o ring on the filter housing.
You forgot latex gloves to keep the oil off your hand! 😜
Good point! 🧤😂
Thank you mate
Where did you get the replacement copper ring for the sump plug?
The copper crush washer usually comes included when you buy a BMW oil filter, I’ve never checked to see if you can order these separately from BMW. Hope this helps 👍🏼