Hello Everyone! Thank you for all your support! Wanted to share my new album #canalwalk czcams.com/play/OLAK5uy_kuqeO0kfy9J1byjqkwhF01sdE0vGq3Fh0.html&si=rblwnXeCnw5xJfP9
Bought one on Sunday from argos, Decided to hide in my Nephews sons room then take the dog for a walk at 4.30am like i normally do...then push the button. Standing at the end of the driveway you can here it and some foul language and the foul language gets worse the more you push the button. The last time i laughed so much was the time i switched on a small smoke machine in his room banged on his door screaming FIRE GET OUT. good purchase.
I remember when these first came out, they were more expensive than a wired doorbell. Now they're relatively inexpensive and easy to install. I have one on the garage that also has a flashing light. It's handy for when I'm welding or making too much noise to hear it. What would be really cool would be if you could record a sound to use a the chime. Like you playing guitar or something Have a great week
sajidkhanmahmood I think it’s the same as this one where it’s got double sided adhesive and screw. It just depends on what you want to use and what is appropriate to use.
It was included with the unit. Look thoroughly in the packaging when you buy the doorbell, its probably somewhere in there like with the manual or in the packaging.
Hello vincent, i just buy the byron DBY-22311 doorbell. When i putted the small battery inside i closed directly so i cannot change the ringtones now...
You can still open it using a small flat screw driver. Then you can change the ringtone to your desired tune. They designed it that you can still open so that if the battery runs out in the future you will still open it to change batteries.
@@vincentryanborres You explain on 2.06 after you put the battery, don’t close it yet. I closed it after i putted the battery. Is not ringing now when i push the button and i open it again for change the ringtone, but he is not changing ringtone and there is no sound when i push the button.
@@ridvanaltun1479 theres a volume button on the right hand side of the case and it probably went on mute. By the way, I’m only a consumer just like you. Bought this unit and shared it here. I’m not affiliated with the company you bought it from. If there’s major problem with the unit please contact the seller where you bought it please. Thank you!!!
Hi I followed the instructions as per the pictures that come with the doorbell. As soon as I put the AA batteries in the unit chimes, however when I press the button on the actual doorbell it lights up but there is no sound. Also no sound when I press the little button that should allow me to change the melody. I’m thinking there’s something else I need to do to pair the two devices but cannot work out what, please help, thank you :)
@@asadr4264 I had the same problem but it may be because I put the speaker batteries in first, the AA ones, before putting the little round battery into the other part. So I took out the AA batteries and then put them back in again and it all worked.
There’s a volume button maybe it’s on mute. Hopefully, you can sort it. Sometimes it needs to reboot by removing the battery and putting it back. Hopefully it will work.
Also a popular French version by Richard Anthony - "En Écoutant La Pluie" (1963) - I have the old LP shown in the video... czcams.com/video/68qkPRmJXe8V/video.html lyricstranslate.com/en/en-%C3%A9coutant-la-pluie-listening-rain.html
May be the remote is okay but the problem is the speaker/receiver. Try and double check the batteries may be it wasnt put properly or correctly. It should be positive (+) to your right then the second one positive (+) towards your left and the third battery should be positive (+) going to the right.
Same here no sound !!! The batteries are put in fine cos the side button on the speaker works ! But when only the red light on the other one !! No Sound when we press the button only red light
There are quite few people who experienced it as well. There’s a mute button. Try and press either the volume control or the melody button: here’s the link: czcams.com/video/PQW28Y8CqiE/video.html alternatively remove the battery and put it back.
@@laichy6059 yeah there’s some people who experienced it. There’s a mute button. At times it’s just removing the battery on the doorbell remote. The flat round one and then putting it back. And then it will sort of reset/restart the unit.
Try and remove the batteries then press buttons without the batteries, then put the batteries back and try if it works. It seems there’s quite few people commented here that the unit doesn’t work/connect.
There’s mute button on the side. Another thing as well sometimes it’s resetting so just remove all the batteries from the button controller as well as the speaker receiver and put it all back again. It will reset and work.
Hello Everyone! Thank you for all your support! Wanted to share my new album #canalwalk czcams.com/play/OLAK5uy_kuqeO0kfy9J1byjqkwhF01sdE0vGq3Fh0.html&si=rblwnXeCnw5xJfP9
Thank you, watching the first part of your video helped me to sort out what I thought was a faulty bell, but wasn’t!
Welcome. Glad it helped you.
Thank you for the video! This is how I found out they delivered an empty battery for the button.
Glad that it helped you. Wish you well and all the best!
Bought one on Sunday from argos, Decided to hide in my Nephews sons room then take the dog for a walk at 4.30am like i normally do...then push the button. Standing at the end of the driveway you can here it and some foul language and the foul language gets worse the more you push the button. The last time i laughed so much was the time i switched on a small smoke machine in his room banged on his door screaming FIRE GET OUT. good purchase.
Hahaha! Brilliant!!!!
Lmao, love it!
Thanks, your video helped me set this up!
Glad to help!!
Thank you, this was very helpful.
You're welcome!
Thanks bro. You solve my problem in seconds.
Glad to help!
@@vincentryanborres I thank you too solved my problem as well very useful video
@@arpadnagy1469 You're welcome!
thank you very good presentation.
welcome and thank you!
Thanks 👍🏽useful video 😊
Thanks and glad it helped!
Thanks for demoing the sounds. It's always a bit of a crapshoot when buying a doorbell unless you can hear the sounds first.
You’re welcome! Bless!
Thanks Vincent
Welcome.
Good video, thank you. We know what your favourite is now :)
Hehehe! Thanks!
Great review, thank you. That’s me off to Screwfix then....🙄
NICE video friend 💯💯💯 (ZIO FENDER)
Thank you
Thanks 👍
No problem 👍
I remember when these first came out, they were more expensive than a wired doorbell. Now they're relatively inexpensive and easy to install. I have one on the garage that also has a flashing light. It's handy for when I'm welding or making too much noise to hear it. What would be really cool would be if you could record a sound to use a the chime. Like you playing guitar or something
Have a great week
That would be great isn’t it. Yeah this is just £10 and quick solution.
@@vincentryanborres it is £15 in argos i cant find for 10
sajidkhanmahmood Bless you! They probably put the price up as most places nowadays
@@vincentryanborres thankyou for response what about the bell push is it just stick to the door or you need to drill
sajidkhanmahmood I think it’s the same as this one where it’s got double sided adhesive and screw. It just depends on what you want to use and what is appropriate to use.
Thank you.
Welcome!
Does anyone know where he got the small plastic bag with the batteries and adhesive from?
It was included with the unit. Look thoroughly in the packaging when you buy the doorbell, its probably somewhere in there like with the manual or in the packaging.
Hello vincent, i just buy the byron DBY-22311 doorbell. When i putted the small battery inside i closed directly so i cannot change the ringtones now...
You can still open it using a small flat screw driver. Then you can change the ringtone to your desired tune. They designed it that you can still open so that if the battery runs out in the future you will still open it to change batteries.
@@vincentryanborres You explain on 2.06 after you put the battery, don’t close it yet. I closed it after i putted the battery. Is not ringing now when i push the button and i open it again for change the ringtone, but he is not changing ringtone and there is no sound when i push the button.
@@ridvanaltun1479 theres a volume button on the right hand side of the case and it probably went on mute. By the way, I’m only a consumer just like you. Bought this unit and shared it here. I’m not affiliated with the company you bought it from. If there’s major problem with the unit please contact the seller where you bought it please. Thank you!!!
Thanks
You’re welcome
Hi I followed the instructions as per the pictures that come with the doorbell. As soon as I put the AA batteries in the unit chimes, however when I press the button on the actual doorbell it lights up but there is no sound. Also no sound when I press the little button that should allow me to change the melody. I’m thinking there’s something else I need to do to pair the two devices but cannot work out what, please help, thank you :)
There’s a mute button. That might be what’s causing it. here’s the video czcams.com/video/PQW28Y8CqiE/video.html
Any luck? I have same issue
Same did your one worked now ?
@@asadr4264 I had the same problem but it may be because I put the speaker batteries in first, the AA ones, before putting the little round battery into the other part. So I took out the AA batteries and then put them back in again and it all worked.
thank you for this one. DIdin't occur to me that way but yeah that could be the solution. Cheers for sharing your experience.
You should a duet with it Vinnie 🤣🤣🤣
Hahaha! True. Stay Safe Paul.
@@vincentryanborres you too buddy.
Gilead cheers
Good video
Thank you!
I can't get the 16 different tones ... Not sure if it's not working properly, or me!
There’s a volume button maybe it’s on mute. Hopefully, you can sort it. Sometimes it needs to reboot by removing the battery and putting it back. Hopefully it will work.
Has anyone cracked one open to add custom chimes?
I haven’t but yeah that’s really a good idea.
Anybody know what the melody is at 4:06?
Rhythm of the rain by The Cascades.
@@vincentryanborres thank you so much. Been driving us mad not knowing that!
James Kelly hehehe! It was pure luck that when you ask about it. I know the song because my mum loves that song and the group Cascades
Also a popular French version by Richard Anthony - "En Écoutant La Pluie" (1963) - I have the old LP shown in the video...
czcams.com/video/68qkPRmJXe8V/video.html
lyricstranslate.com/en/en-%C3%A9coutant-la-pluie-listening-rain.html
I can't get. The red light comes on but there is no sound when I press the button on the front or inside....
May be the remote is okay but the problem is the speaker/receiver. Try and double check the batteries may be it wasnt put properly or correctly. It should be positive (+) to your right then the second one positive (+) towards your left and the third battery should be positive (+) going to the right.
Same here no sound !!! The batteries are put in fine cos the side button on the speaker works ! But when only the red light on the other one !! No Sound when we press the button only red light
@@sadafnaseem519 Sorry to hear that. Perhaps you can return it as faulty.
Try pressing the volume selection button a few times on the right hand side of the case - there is a mute setting.
Any luck? I have same issue
Mine isn't making any sound 😕:(((
There are quite few people who experienced it as well. There’s a mute button. Try and press either the volume control or the melody button: here’s the link: czcams.com/video/PQW28Y8CqiE/video.html alternatively remove the battery and put it back.
Me 2
@@laichy6059 yeah there’s some people who experienced it. There’s a mute button. At times it’s just removing the battery on the doorbell remote. The flat round one and then putting it back. And then it will sort of reset/restart the unit.
Mine wont connect
Try and remove the batteries then press buttons without the batteries, then put the batteries back and try if it works. It seems there’s quite few people commented here that the unit doesn’t work/connect.
@vincentryanborres it works now thanks for the info.
glad it worked.
Does it have a Christmas chime lol
Hehehe! It would’ve been perfect for the holiday season
Oh does it not? I want one that does
@@mylescheetham1878 I’m afraid it doesn’t.
Bought two of these, both don’t work. Help Vincent ?
There’s mute button on the side. Another thing as well sometimes it’s resetting so just remove all the batteries from the button controller as well as the speaker receiver and put it all back again. It will reset and work.
@@vincentryanborres thank you. We worked it out. We had to remove the 3 batteries and insert them again. It is working now. Thanks for reply.
@@iainbrown4069 Thats good news!!!
I had same problem and your solution worked. Ty brother
You're very nice looking (sorry to your wife, no offence just saying what I see) 👍🏾 Thank you for the video.
Ah bless you. Wish you well and all the best. Keep safe always!