One year update on the dual fuel filter kit on my Cummins!

Sdílet
Vložit
  • čas přidán 24. 08. 2024
  • PLEASE LIKE AND CONSIDER SUBSCRIBING IF YOU ENJOY! THANKS!!
    I've had a few people ask me how the kit is doing so far so here is an update. Kit is installed in a 07 Dodge Ram 2500 Cummins with the 5.9 engine.
    Links
    Filter kit: dieselfuelfilte...
    Need Spares?
    water separator: amzn.to/38gy1qx
    Cat Filter: amzn.to/3n2EHN1
    Links above are amazon Affiliate

Komentáře • 61

  • @aaronb5644
    @aaronb5644 Před 2 lety +2

    The guys having issues with the threads are the guys that are overtightening them and pulling threads. It's very simple, to the gasket and another 1/2 turn. That's it!

  • @ondago2
    @ondago2 Před 11 měsíci

    Just for clarity just for clarity for those who've maybe not taken a filter and inspected the fuel when he takes the water separator and drains it that is necessarily fuel from the dirty side of the filter because the air I'm sorry the water is on the outside and dirty side of the filter it comes into the perimeter holes on the outside of the filter and get sucked in through the middle and up the center tube is the clean side so when he opens it up and drains it besides the fact that it could be just dirt that has gotten on the valve or something or in the jar like you said it is normal and expected that if any dirt was not just trapped in the filter pleats it would be draining out with the water that he drained doesn't mean the filter missed it it means the filter stopped the dirt

  • @kdbl007
    @kdbl007 Před 3 lety

    Thanks for the update...just ordered mine!

  • @JimmyDistheMan
    @JimmyDistheMan Před 3 lety

    JJ, Where you at? We miss your videos! I came by to see if you had made new transmission lines and put a secondary trans cooler. I'm about to do that project myself.

    • @j.j.sgarage1457
      @j.j.sgarage1457  Před 3 lety

      Lmk how it goes. I have the lines just debating getting a new trans first…

  • @grell6969
    @grell6969 Před 3 lety +2

    Hey man love the truck thank you for your service

  • @twintibbsdiesel93
    @twintibbsdiesel93 Před 3 lety

    I love how you laughed when you cut the filter and pried it and it flew LMAO I laughed too :) Your so funny and down to earth :)

  • @renajay9386
    @renajay9386 Před 3 lety

    Thanks for the update!

  • @livelovelearn360
    @livelovelearn360 Před 5 měsíci

    Nice truck. Almost identical to mine. 😀

  • @twintibbsdiesel93
    @twintibbsdiesel93 Před 3 lety

    I have that same filter wrench LOL It's a good one :)

  • @patcmontgomery
    @patcmontgomery Před 7 měsíci

    Getting ready to install this on my truck. What did your stock filter look like and are you still running it as well?

  • @JC-rz6gf
    @JC-rz6gf Před 3 lety

    whats happening J.J. well know we know Lol its not quiet time for my filter to be change. i give you credit your the reason. I purchase this //dieselfuelfilterkit. your the man J.J. as all ways {keep it Cummins} you have my vote.

  • @twintibbsdiesel93
    @twintibbsdiesel93 Před 3 lety

    Diesel fuel always has crap in it. You did good by installing the filters :) I'm waiting for my valve springs and pushrods you suggested to come in I'm doing those next :)

    • @j.j.sgarage1457
      @j.j.sgarage1457  Před 3 lety

      Good luck with the install. It takes time and requires patience. Take it slow and don’t drop a valve. 👍🏽

    • @anthonykontos7931
      @anthonykontos7931 Před rokem

      @@j.j.sgarage1457do have a video of how you did this whole setup? I would love to do it to my 17 6.7 Cummins

  • @anaconda7540
    @anaconda7540 Před rokem

    Anyone know what thread the fittings are on elbows . Idk if my bracket was drilled on a Friday or Monday but have to get a short drop elbow or line won’t clear bracket off frame and allow it to sit into outside seat bolt

  • @code10garage94
    @code10garage94 Před 3 lety

    Awesome!!…thinking of getting that same kit for my 2007 megacab 6.7…Aloha 🤙🏽

  • @pineappleIII
    @pineappleIII Před 3 lety +1

    How's the Fleece lift pump holding up? Have you ever gelled up with the filter setup? I know we don't get that cold here in WA State, I want to go with the same setup instead of Airdog or Fass

    • @j.j.sgarage1457
      @j.j.sgarage1457  Před 3 lety +1

      Fleece is holding up great! I have not gelled up. I agree I don't think it gets cold enough. I also treat with Amsoil all in one.

    • @pineappleIII
      @pineappleIII Před 3 lety

      Thanks for the update man, seems like that's the way to go. I didn't watch the video where you tested them in the mini fridge until after asking that. Good to know the Amsoil all in one is worth it, I've used Optilube xpd for years but might need to switch

    • @j.j.sgarage1457
      @j.j.sgarage1457  Před 3 lety

      @@pineappleIII No worries man. Thanks for checking it out!

  • @geauxtigers6369
    @geauxtigers6369 Před 3 lety

    Why don't you use 2 cat filters

  • @antalsirman1618
    @antalsirman1618 Před 3 lety

    Hi I have tried to find the kit you installed but I can't find it fuel filter relocation kit j350

  • @gordonvanderelst923
    @gordonvanderelst923 Před rokem

    About to order one for my dodge! What about the OEM fuel filter? Maybe I’ll just take the filter out and leave it run Wii’s filter? What you think?

    • @j.j.sgarage1457
      @j.j.sgarage1457  Před rokem

      You can leave it or take it out. I ended up deleting mine completely.

  • @twintibbsdiesel93
    @twintibbsdiesel93 Před 3 lety

    Bro where you been ? I miss your videos I hope your OK ??

    • @j.j.sgarage1457
      @j.j.sgarage1457  Před 3 lety

      Been really busy with different stuff. Trying to get my life back together so I can do vids again. Thank you! I hope you are doing well.

  • @robertd6925
    @robertd6925 Před 2 lety

    Does anyone make a setup like this for a '96 5.9 3500?

    • @j.j.sgarage1457
      @j.j.sgarage1457  Před 2 lety +1

      An universal kit would probably be your best bet. Dieselfuelfilterkits and dieselpowerproducts make one I believe

  • @raulvaldez4018
    @raulvaldez4018 Před 3 lety

    Oh shit I have a GEN three and a Boston too!!!

  • @grasscutter88
    @grasscutter88 Před 9 měsíci

    water settles to the bottom, correct? So why are you mixing what water that's in the jar by shaking it up? lmao You're emulsifying it.

  • @JC-rz6gf
    @JC-rz6gf Před 3 lety

    whats happeing J.J. have not heard from you for a mint. what do you thank about a grid heater delete. video stay safe Sir.

    • @j.j.sgarage1457
      @j.j.sgarage1457  Před 2 lety

      How’s the truck running JC? Not sure about a grid heater delete… I kind of like having it here in WA…. But maybe who knows haha

    • @JC-rz6gf
      @JC-rz6gf Před 2 lety

      @@j.j.sgarage1457 whats going on J.J, where have you been. you know i'm in N,C.the Truck is doing good,what is your next content on the Truck the front Diff cover looks very nice on my truck.Thanks be safe and as always keep it Cummins'

  • @justinbesselink3956
    @justinbesselink3956 Před 2 lety

    What is the name of this kit we're can I get one

  • @overheadcam32
    @overheadcam32 Před 2 lety

    Are u still on stock lift pump and injectors?

  • @kellydavis4954
    @kellydavis4954 Před 3 lety

    you up here in the pnw...wet side

  • @dmacleod101
    @dmacleod101 Před 3 lety

    what dash pod that?

    • @j.j.sgarage1457
      @j.j.sgarage1457  Před 3 lety

      Autometer tripple dash pod
      www.xtremediesel.com/auto-meter-triple-dash-pod

  • @guyinthegreencar
    @guyinthegreencar Před 3 lety

    Where at in WA do you live?

  • @WhattHappens
    @WhattHappens Před 3 lety

    I have a 2016, just came across this kit online and I'm wondering how it works/what needs to be done with the front filter when you run this?

    • @j.j.sgarage1457
      @j.j.sgarage1457  Před 3 lety +3

      I made a vid when I installed the kit. You can check it out if you want. You can either leave the stock filter in or delete it like I did. Its personal preference.

    • @WhattHappens
      @WhattHappens Před 3 lety

      @@j.j.sgarage1457 awesome I'll check it out. Thank you

  • @MannyAguilarJr
    @MannyAguilarJr Před 2 lety

    I wouldn't prefill the filter, only prime the filter once it's on. Prefilling, especially if you're doing it through the middle hole and not the outer holes(outer holes dirty fuel in, middle hole clean fuel out), will send unfiltered fuel down to your injectors and other parts downline. Same with oil filters, don't prefill.

  • @mcshane191
    @mcshane191 Před 2 lety

    Doggo

  • @rosacerda4758
    @rosacerda4758 Před 3 lety

    👍 👍👍👍👏🏼👏🏼👏🏼👏🏼💖🙏🙏🙏💖💖