How to repair Stone Chips on your vehicle using PPG & Mirka
Vložit
- čas přidán 6. 09. 2024
- Got stone chips on the front of your car?
Howard shows you how he repairs these on his Falcon GT Bonnet using PPG Paint and Mirka Polish products.
Music from Uppbeat (free for Creators!):
uppbeat.io/t/s...
License code: LJVBBJILPM2RGVBJ
uppbeat.io/t/a...
License code: CDMP8TX8J7CRJILL
uppbeat.io/t/a...
License code: GJPWBCVRTR6ZZFGE
uppbeat.io/t/a...
License code: VFNVHAPQE3OGXWTJ
uppbeat.io/t/a...
License code: T6YXH06L4RPRKMEI
I think I'd need a magnifying glass to see the imperfections. You are an artist.
Thanks mate.
@@AstillDesign those mirka’s cost a fortune
Watching these videos is very detrimental to my bank account 🤣
Nice one
1-3 year ceramic coats can be machine polished off. The 4+ years typically will be a possible 2000grit wet sand.
Thanks for that!
@@AstillDesignno quite true. will polish. of easy
Thanks Howard, looking to do this to my family car this spring, lots of great tips. As far as ceramic coatings go, the only way to get them off is to polish it off and the only way to really know if it has been removed is by water behaviour. When the water sheets or beads, coating is still there, when it sits, your back to paint. Love your work.
Good luck! thanks for your input
Thanks for showing us this technique. I might have to give it a try. I’m guessing it’s easier to do this than remove those stripes to respray the bonnet.
You are so welcome!
Always watch the channel funny enough i have a bf ute and the same gt335. Same ks but my stripes need replacing they have stone chips too.
Yeah that’s what happens when you drive them.
From memory Kovax paper isn’t directly equivalent to normal sandpaper. Eg K1500 might not sand and finish the same as P1500
Good pickup, it’s around P1200 equivalent
Thanks for sharing your technique - based on your great tutorial I cant wait for the weekend to work on my daily (provided the weather in Melbourne is reasonable for winter).
Glad it was helpful!
Great video, I try to explain this process to my customers all the time as they think it can be achieved in a day. I also did a video of wax v coatings for the same reason you mentioned.
Cheers mate, you can use this for second opinion.👍
Great Show THANK YOU Howard!..For the Knowledge you share.
Thanks for watching!
Ceramic coating.. on repair as per what you have just done is Apply Ceramic coat again.
Yeah was enquiring about removing or colour sanding once it’s ceramic coated
Thanks Howard for your knowledge and expertise once again. Not sure if I would be game to practise on my car! do you have another spare GT I could have a go at? Bill Mc
Sorry Bill mines done now
Great extended video on this subject. Thanks for sharing your skills and knowledge. I've got a little experience on fixing chips (Dr Colorchip kits are great) and full paint correction on my late model Hilux. I think I'm even skilled enough to fix a few chips on the original single stage paint on my '70 Torino Cobra. In the video you mentioned a "...trendy machine..." when trying to take a little more paint off a filled chip. Would you clarify?
Cheers mate
www.mirka.com/en-AU/cordless/
@@AstillDesign thanks Howard I should have realised that. Once again great video.
Hi Howard. What sort of RPM are you using on the yellow & black pad. Position 2 or 3? I'm new to the foam pads, been using wool
Depends on the machine and how much product you have plus the amount of pressure. I treat it the same as wool.
Will this Technique work on Metallic 🎨 Paints 🎨
Yes mate, mix base coat with clear 50/50 plus hardner and fill them up.
Nice! How do you find the 3-inch Mirka?
Absolutely love it, just finished doing the whole car with them. Direct drive and orbital. Lots of grunt, very quiet and good battery life.
Turned out nice 👌 👍 ❤🍻🍻🇦🇺🇦🇺🦘🦘🤝🇦🇺🇦🇺🦘🦘🌧🏔
Cheers mate
@@AstillDesign your welcome Howard 🙏 🤗
Thanks mate. I got alot out of this. Mainly i need more tools and to go through more stages before waxing. Can you please explain to me what the water metho mix is.
It’s a cleaner used in paint shops that is 50/50 water and methylated spirits PPG offer it as a premix.
Howard, I have a metallic black car. How i go about filling the chips?
Your very limited with what you can do and results are not great
Mix your base coat colour with clear 50/50 and add hardner.
I have just bought a 2015 Territory Titanium with 67,000kms, its in super good nick. What can i do to protect the paint ?
Check out this video of Dale’s wagon.
Step By Step Process to correct & polish factory paint
czcams.com/video/qQPcAy26xDc/video.html
All these different polishing cutting pads is over whelming
It does make all the difference, progressivly getting finer to full gloss