Volvo XC70/V70 PCV System Removal PART 1. |FIGURING IT OUT|

Sdílet
Vložit
  • čas přidán 18. 09. 2019
  • In this Episode I will be removing the PCV system on a 2002 Volvo V70 Cross Country, also known as the V70XC or XC70. I have never done this job before so follow along as I try not to break things.
    Please do proper research before attempting to do any job. Especially if it is your first time doing it.
  • Auta a dopravní prostředky

Komentáře • 18

  • @jimschuyler4339
    @jimschuyler4339 Před 5 měsíci +2

    This is informative as SHIT, I mean it in a good way. I am struggling with a Volvo xc70 and this Volvo help SO MUCH. Thank you. Volvo is a pain in the ass but atlest it is not German made over engendered nightmare, it is just a Sweden bad dream to work on.

  • @williamcoffman7149
    @williamcoffman7149 Před 2 lety +1

    thanks for showing this video, it makes it easier to see how to take that big tube off for the pcv out...no one else has this kind of detail in their video for that part...this helps me out, thanks as im doing the same thing to my car now.

  • @sitatt
    @sitatt Před 10 měsíci +1

    Great, thanks mate!!! Really helpful and informative!

  • @cic-jakevanddalgeemyers.2739

    Perfect.

  • @nestron4952
    @nestron4952 Před 3 lety +1

    Awesome video men! Very detailed and well edited..It helped me a lot with my 2005 xc90 2.5t which is a very similar engine. Thank you.

  • @havingagoodtime6687
    @havingagoodtime6687 Před 2 lety +4

    This video seemed great but you skipped over removing that banjo bolt and loosening the passenger side bottom manifold bolt. I cant figure out how to acess it

  • @0x00zero
    @0x00zero Před rokem +2

    I think the fans and shrouds come out pretty easy.....let you work on left side of engine (front of car) easier...

  • @CharlieBoy360
    @CharlieBoy360 Před rokem +3

    Unenthusiastically "Yo.... It's a earthquake". The end.

  • @gordonjelke2475
    @gordonjelke2475 Před 8 měsíci +1

    @MechanicallyReclined, any advice on how to remove the very end of that long PCV tube? There's very little clearance in there!

  • @stevetoddsgotit1189
    @stevetoddsgotit1189 Před rokem

    the music alone was worth the view

  • @robertthomas7343
    @robertthomas7343 Před 3 lety +4

    would prefer your instructional commentary over the soundtrack. also do not skip or edit during deconstruction. Thank You For Your Hard Work !

  • @joestar8678
    @joestar8678 Před 3 lety

    Thank you for the detailed Video. Can you please tell me, what is that golden tool to remove the metalhose at 4:40?

    • @mechanicallyreclined643
      @mechanicallyreclined643  Před 3 lety

      That is the Fuel/Transmission line disconnect tool. www.harborfreight.com/fuel-and-transmission-line-disconnect-tool-set-7-pc-64813.html
      This is a link to the one I used on the video. You can also search Amazon for " Fuel line disconnect tool" I'm sure some kits will pop up.
      Thanks for watching.

  • @thecarsectionthecarsection6420

    Are you anywhere near philadelphia so you can replace minds ?

  • @Panzerbeast
    @Panzerbeast Před 10 měsíci

    Can this part still be bought?

  • @parkerallen2765
    @parkerallen2765 Před rokem

    Lost my 7 mil:(

  • @edwinbeacham489
    @edwinbeacham489 Před 2 lety

    The music is annoying and adds nothing. You omitted removing the banjo bolt and skipped other parts. Was this to reduce length of video? Take a look at Robert's videos and learn.

  • @michaelgill5186
    @michaelgill5186 Před 3 lety

    It does or it does NOT wtf is it Kind of ? Americanisms