Amazing Three Box Craftsman Tool Box Haul - All for $400!
Vložit
- čas přidán 13. 09. 2024
- I picked this set up from a man who was moving to the Philippines in a few weeks. His hobby was restoring antique woodworking tools but he was also a backyard mechanic so you never know what may be inside these boxes. Let's get busy!
#craftsman #craftsmantools #antiquetools #vintagetools #snapon #snapontools #snapontool #ratchet #wrench #hammer #toolbox
Nice score on the tools you bought. I have a 1/2” electric drill looks very similar to yours. Mine is a Skill brand it’s very powerful. Mine will break fingers if you’re not careful. I always use the loop handle that came with it, so I always use it both hands on while operating.
Thanks! Yes, good advice! Especially when using a hole saw or something like that, these drills can fracture your wrist easily. I don't recall if I found that handle in the box or not but I do have a spare.
Bodywork dolly in the top drawer bottom box
Forster bit for cabinet hinges from marital
Bottom drawer had parts of a hub puller and a coil spring compressor
Thank you for the info! Much appreciated.
I concur.
I hope your house is built on firm ground otherwise the tons of tools and tool boxes in your possession may cause sinking. 😉
I donate a lot of it out but yes, it is beginning to build up. :)
@@floridarusticrepairs 😁
At 27:50, that is a body dolly used for repairing dents in car bodies, fenders, etc. It is held behind the metal that is being lightly hit with the body hammer to better control what the hammer is doing.
Thanks! i could have used one of those several times. I'll keep it.
If I seen this ad I definitely would have passed. Some nice gems in here at least. The SK Lectrolite stuff is neat. That branding wasn't made very long so it's a bit hard to find.
Funny you say that. With almost no info and at $400 I did pass on it for two weeks before finally deciding to go see it.
Nice haul you definitely got your money's worth thanks for sharing my friend
Thanks for watching! I really wanted the boxes but found some gold inside too.
That tool at 32:50 is made for removing and installing dog-dish hubcaps. The hook removes them, and the rubber part is used to install them.
Thanks for the info and timestamp! I knew I had seen one of these but couldn't recall what it was for.
To Think this listing had NO Photos of the included tools. There you have it folks! 😂. Awesome!
A middle box to boot which had the most loot!
Thanks! This one proved that sometimes you need to just take a chance. If it hadn't included the middle box I likely would have passed on it.
Great hual. Have you cornered the market on used Craftsman tool boxes there in Florida. I'm looking forward to seeing the restoration on the Snap-on and the old drill. Thanks again for another great video
I've got a lot of them for sure. i just donated a nice set out to the son of a friend of mine. Eventually they all find homes, but mostly mine. :)
Great score! Nice video!
Thanks! Some gold in this box for sure.
First rivet dolly for solid rivets, 2 hub cap tool install hub cap.Eck USMC
I never would have guessed the hubcap install tool. Thanks!
In bottom drawer the red handle pry tool with the rubber piece on it is used to remove and install hub caps. Pretty old.
Thanks for the info! I'm going to restore that.
I believe they call the bit in the box a Forester bit. It's a wood drill bit.
Thanks for the info!
Take that 1/2 inch ratchet to the local snap on dealer and get the parts...
I found the rebuild kits are cheap so I bought one. I suppose I should have tried to swap it out. :)
Gotta admit, I was surprised the power drill still works.
Yes. It didn't sound all that healthy but it probably just needs to be cleaned and greased up.
Body dolly for body work
That's a new one on me. Thanks for the info!
The Snap On 1/2 drive impact socket set retails for $369
Wow! Thanks for the info. I may need to keep that and swap out my set.
The ratchet looks like an old sk and the other spring copresser
Thanks for the info! Someone else also commented that the ratchet was an SK which is great because I'm building an SK set.
I keep thinking that if you went through most modern tool boxes and threw away all the Chinese and Taiwanese stuff, the box would be mostly empty. Possibly to include the box itself. Yes, even if you had a lot of tool truck brands in it.
Yes, unfortunately. A lot of the brands being made in Taiwan today are decent but virtually nothing is made in USA anymore.
Coil spring compressor
Thanks for the info!
Did any of those sk wrenches go with the wrench roll?
Yes, two of them. I'm still missing the #38 and the two smallest. I also found that there was a Lectrolite sales brochure stuffed into one of the wrench slots too.
Those roundhead ratchets that say USA are SK
Thanks! I'm building an SK set and these will help.
Buy a Honda or Toyota and you will suddenly see the need for many 10mm
I just never understood why people always claim to lose the 10mm. I guess just because it's a common use socket. Thanks.
27:56 I think but I’m not sure, for auto body work??
No idea, but you may be correct. Thanks!
@@floridarusticrepairs Yes. I think it is called a double ended dolly for metal work. Held behind the metal you are shaping.
At 33.56 the 3 leg's and handle are too a heavy puller
Thanks! I found the other parts to it so I think it's complete.
You did well. You could sell 2% and make your money back. There are some things there that I have no clue what they are.
Thanks! I don't usually spend so much on old tools because i donate most of it out but I'm since keeping these three boxes it's worth it.