The hard core enthusiasts who run this kind of gear in massive systems are clearly in a league of their own. The needed electrical system and large gauge cabling needed to enable this gear to properly run at its rated capability is a substantial investment. It is mind blowing to see folks run this kind of equipment in their daily ride... 🔊💪🏽🔥
@@303nitzubishi4 One extra alt and 1 lithium battery with enough 0 gauge will suffice for upwards of 10k rms unless you play song after song with the volume up. For most people, crank it loud for one great song and dial it back down for the next and 1500 bucks worth of electrical will give you the freedom to install just about any amp you want.
Remember Big D's very important comment. "It takes power to make Power." Without the proper batteries , alternator and wiring, not going to happen. That goes for all not only this Beast.
@@303nitzubishi4 well you may think that but even the average house with a 200Amp service is only 48000 watts total 😳 some of these guys are running well over that And If you have seen a 50 -100kw generator is not small lol
@@NightshiftCustom We need to teach some of these people about amperage. Everybody is so into voltage they forget about the most important thing. I explained it to the newbies dealing with electrical and getting electrocuted. Think of the wattage as water and the orange juice running through the water as the amperage the more orange juice get the picture? Makes it easy for the average consumer.
Carlos Rodriguez, also used Fi Audio NEO subwoofers, I had the 4.11 which is the best neo they had and Carlos did it on the 3.7 that are like 700$ each half price of the competitions Neo 😂 that's awesome
While there is no universe where I would ever use this amp I am glad it exists. It moves the hobby forward and hopefully the technology can trickle down to smaller amps. As a plus, this one can’t be mounted on a Harley to blast midrange at the world. Great job keeping it interesting Big D.
Wow that’s my guy Carlos rodriguez man he has come a long way I’m still stuck in the past lol back when he had that walled bmw with two purple basket TANTRIC SOUNDS SHD 18”s I know cause when he blew them up with two flatline audio 7ks I BOUGHT THEM OFF HIM AND I STILL HAVE THEM TO THIS DAY I ACTUALLY GOT 5 of them now… congrats Carlos long time no talk…
These Incriminator amps are a work of art, if my dealer carried them i would have went that direction, but my Crossfire 16k is holding strong at .67 on 3 Xt3 18's, and 135ah of c-max, honestly I've been happy so far🤙, Super solid numbers out of the Incriminator 🤯, thanks Big D💯
@@dextermorgan1 This is the channel I only have a couple vids burping with the new build, I'll put something together tonight or tomorrow, also need to post on our Ford Raptor just put 4 DD 1508's, Lc2, and a DD M3c, neat little build🤙
Thanks for the demo as always big D. I'm an sq guy so I couldn't care less about an amp like this but it's cool to see how the other half lives 😀 The stacked PCB design seems like a great idea, hopefully other manufacturers start adopting it at some point even for more daily driver type amplifiers
The new D4S JP amps use all SMD (surface mount) electronics, that's why they are so much smaller than previous half bridge amps with the same power. Incriminator said they are working on this as well and future amps may be half the size as well 😮
I really like the idea of a taller, shorter amp. It opens up a lot in terms of installation limitations that other high output half bridge amps have due to their length. Incriminator branding just doesn't speak to me though so I've never given their gear a try.
I would just tell IA that amp got lost in the mail on the return shipping. Lol Thanks for testing it, I was always wondering how powerful those amps are.
Yes!!! Been waiting for someone to do videos on this brand forever. I’ve seen the adds and been like whoa mama!!! This thing is a effing beasssssttt!!! Great video brotha!
Dynamic is realistically all people should care about.. that’s what you actually are getting while listening to music.. people focused on rms which is great to paper numbers on a test tone.. but at say 100w you bouncing between 40-120 as the music plays certain notes and songs.. dynamic is where it’s at and the reason these are so widely used in spl is because of that.. simply they put a lot more effort into larger internal caps and coils.. = dynamic power and louder hits on music.. it also give you that extra for spl burps..
Great review, important note: I noticed after I paused it at 9:20 mark on the left side of the intimidator sign of the caps that something that's squared looks kinda burned off maybe it's my viewing I don't know but I'd check it out if I were you but I know it's a year later so I hope you get to read or at least look into it, best of wishes Big D
Wow 184 db on 15k amazing. I love how fat and different this amp is. Very cool looking to me. Very expensive. The JP63 almost had it. I can't wait for comparison to JP83. 😁
@@SidyDidIt dunno forsure, Craig Butler did 182dB with 4 DD Z 18" subs on 4 5000W DD Z1A amps, that was pretty amazing back in the day however this ofcourse needs the entire car to be turned into a giant enclosure, bolted shut etc so nothing can leak directly
@@BH4x0r and then you have Nathan millyard. 8 DD Z418s on 16 DD M8000s doing over 180 at ~50 hz. With plenty of bandwidth all the way down to like 18hz
That amp is a beast. Don't forget that price is a steal compared to the late 90's were you paid $1 per watt or more. GJ yet again hope you get that sub sponsor so you can use all that power. 👊
for what its used for (and the extra money you'll be dumping in, considering) only downside i see is the remote voltmeter, but that's a minor quibble and easily fixed. and really, considering the output, it's a decently compact package compared to some i've seen at the same rating, that don't go as far over rated.
Heck yeah Big D, I would love to see Jon Rabe over at SkyHigh send you one or two of those Trinity Audio monsters to showcase during your "do it bump tho" segments that would be sickkk also if you were able to get a custom box builder on board like our boy Bobby Gately possibly then you'd really be shaking some stuff!!!
1995 Linear Power 2502iq Amp Dyno Test AD-1 czcams.com/video/Nzvv1eUPFvQ/video.html Linear Power 8002 Amp Dyno Test Old School czcams.com/video/Sp4DfOCE87w/video.html
Revisiting this one. I have an old IA 20.1 that I used to run on an RE MT12 with dual .7 coils wired to .35 Surprised this one went into protect but I guess you dont really need to run the giant amps that low. Keep your batteries charged, friends.
Dang you weren't given this one for the work and exposure.... hopefully its because they plan on hooking you up with the bigger model 💪😁 Thanks for the video Big D. Happy memorial day weekend to you
I remember being 23 years old and dreaming of having an IA 40.1. At the time (and still today even) the amount of money it took to buy the amp and supporting electrical system was out of budget. I wound up going from 2 eD nine.1s on 2 RE SX 15s to 2 Autotek MM4000s on 2 RE MTs. 800 bucks I paid for the pair of MM4000s. Great amps but not 40.1 great. Now 4k amps are everywhere and people are dreaming of 12k amps.
I'm sure it's an outstanding amplifier, but didn't the JP63 do about the same @ a better price and a better layout then being stacked? Have you tested the JP83?
Really sweet amp, these guys are fast becoming a dominant brand in the spl and bump market. Only thing that bummed me out is the remote, for that price and that level it should have a volt meter built in, kind of chincy there.
Hi Big D, I Got 2 new Soundstream team x5.15 in ground shaker boxes that are both dule 1-ohm coils. I can set them up for 1 or .5 impedance,7000 rms and 15,000 peek. Please give me a shot at this. I would expect 140 DB + let me know what you think
I love that we have so many options now days. Even 5 yrs ago we didn't have a whole lot of choices. Even with all the bs in the world you can build a VERY powerful system for a couple grand or less depending on your taste and goals n the bass knob is the same you get with skar, synergy, ect. The two I have rn have lasted longer than rockfords $40 remote for sho
hey there bro had a question about the fuses for these amps. i ordered the ix 6000 yesterday. would i use 3 200amp fuses on the 3 positive wires that go to this amp to equal up to 600amps. or 600amp fuses for all 3 positives wires?
subwoofers, especially in an SPL build are creating ALOT (like 10-20% or even more) total harmonic distortion, so having it under 1% THD in an SPL build is completely useless. Uncertified and Dynamic truly are the numbers that matter here. Now if you're doing an SQ build, then that's a different story, but for SPL, uncertified is where its at, and also dynamic for those burst tones. Humans cannot detect distortion in bass frequencies until around 10% or sometimes more.. so i see no problems here, this amp is exactly what you want, big dynamic numbers, how amazing for such a small package. I also LOVE that the power and ground are actually separated, its alot safer that way and more convenient.
Yes that cool to see my amp get ran like this I have i6 reserved I wanted to send it in to get a test on it but seeing this is enough proof and I will have to get in on do it bump doe video
Im new to this car audio stuff just bought some 2× fi audio mt 4500rms 12inch subs was looking into this amp any recommendations on how many batteries looking into agm batteries should be ran? stock alternator for now thanks alot 🙏
any suggestions for a half decently priced 4 channel amp for a SQ build for my truck? list so far 4 sundown sa10's, audiocontrol dm-810 dsp, 2 sets component jbl gto609c 6.5 sets, and 200 pounds of sound deadener lol 1/2" thick around the hole truck to deaden the diesel engine. thanks
![Why is this 1000W $63 Amp BANNED from Amazon? [4K]](http://i.ytimg.com/vi/4RRyAANKRlw/mqdefault.jpg)
The hard core enthusiasts who run this kind of gear in massive systems are clearly in a league of their own. The needed electrical system and large gauge cabling needed to enable this gear to properly run at its rated capability is a substantial investment. It is mind blowing to see folks run this kind of equipment in their daily ride... 🔊💪🏽🔥
I agree!
I know 2 guys with $10k plus in daily builds
@@mattadams7922 I can see that this sickness... er, ah... "hobby"... will eventually land me at that dollar amount. lol
Yeah buying a huge amp like this is the easy part. Buying and mounting extra alternators and batteries to feed it is the far more complex part.
@@303nitzubishi4 One extra alt and 1 lithium battery with enough 0 gauge will suffice for upwards of 10k rms unless you play song after song with the volume up. For most people, crank it loud for one great song and dial it back down for the next and 1500 bucks worth of electrical will give you the freedom to install just about any amp you want.
Maybe I haven't said it enough...
Mr D, I just want to put out there, that I appreciate all of your hard work!
Thank you sir!
@@wal CLEARLY one of the hardest working guys in the industry lol. I'm beyond jealous sir!
Remember Big D's very important comment. "It takes power to make Power."
Without the proper batteries , alternator and wiring, not going to happen. That goes for all not only this Beast.
900+ Amps is no joke
that's 8-9 battery's at 100AH each!!
Once you reach a certain point it's probably easier to just build a generator on a trailer or roof rack or something to power your spl amps 😆
@@303nitzubishi4 well you may think that but even the average house with a 200Amp service is only 48000 watts total 😳 some of these guys are running well over that
And If you have seen a 50 -100kw generator is not small lol
@@NightshiftCustom
We need to teach some of these people about amperage. Everybody is so into voltage they forget about the most important thing. I explained it to the newbies dealing with electrical and getting electrocuted. Think of the wattage as water and the orange juice running through the water as the amperage the more orange juice get the picture? Makes it easy for the average consumer.
@@303nitzubishi4
Just go nuclear. Russia has a sale now.😊
LOVE the look of this amp. Makes me wish I was in the SPL crowd just to have this nice thing sitting in the hatch. What a work of beauty!
Carlos Rodriguez, also used Fi Audio NEO subwoofers, I had the 4.11 which is the best neo they had and Carlos did it on the 3.7 that are like 700$ each half price of the competitions Neo 😂 that's awesome
👌😬👍
IA doesn't get enough love..this company has been around and bangin for a very long time...IA commanded the last Vegas car audio scene..
The death penalty was my favorite like
@@chaseleim4773 I remember when R E audio came out in Vegas..it was the shit..until IA dropped..and it was a wrap....
@@chaseleim4773 I have two incriminator audio death penalty r6 12's and they handle well over 4k rms each sub. Best team out there ever
👌😬👍
While there is no universe where I would ever use this amp I am glad it exists. It moves the hobby forward and hopefully the technology can trickle down to smaller amps. As a plus, this one can’t be mounted on a Harley to blast midrange at the world. Great job keeping it interesting Big D.
🤣👍
That amp is beautiful, incriminator audio is doing their thing!
yeah boi!
I've been waiting a long time to see one of these dynoed
Please correct me if I'm wrong but they measured the wattage on one amp at 15,903 and he was running 12 amplifiers 12 x 15,903 = 190,836 watts
I’m typically not interested in the bigger amps because I’d never use them in any of my builds, but this amp is just plain out cool! Innovation ftw
Cool in many ways! 😝👍
Reminds me of the banned amplifier with the built-in batteries! Crazy stuff man, imagine this in the mid to late 90s
👌😬👍
Wow that’s my guy Carlos rodriguez man he has come a long way I’m still stuck in the past lol back when he had that walled bmw with two purple basket TANTRIC SOUNDS SHD 18”s I know cause when he blew them up with two flatline audio 7ks I BOUGHT THEM OFF HIM AND I STILL HAVE THEM TO THIS DAY I ACTUALLY GOT 5 of them now… congrats Carlos long time no talk…
Awesome 👏
I saw a prototype incriminator 15.1 in a van. Man what an piece of equipment
Thanks for doing this vid Big D! I own this amp and have been curious about the numbers.
Still loving this amp. Finally got it on two Fi MT 15s at .5 and it doesn’t even break a sweat!
These Incriminator amps are a work of art, if my dealer carried them i would have went that direction, but my Crossfire 16k is holding strong at .67 on 3 Xt3 18's, and 135ah of c-max, honestly I've been happy so far🤙, Super solid numbers out of the Incriminator 🤯, thanks Big D💯
That's a system I'd like to hear!
@@dextermorgan1 This is the channel I only have a couple vids burping with the new build, I'll put something together tonight or tomorrow, also need to post on our Ford Raptor just put 4 DD 1508's, Lc2, and a DD M3c, neat little build🤙
Crossfire amps are legit as well
I love the xt3 but they're too heavy
@@wal I have a DD 9515 Supercharged laying around, just needs a recone🤙
Korean beast mode.The power this amp produces is insane.
😝👍
Thanks for the demo as always big D. I'm an sq guy so I couldn't care less about an amp like this but it's cool to see how the other half lives 😀 The stacked PCB design seems like a great idea, hopefully other manufacturers start adopting it at some point even for more daily driver type amplifiers
The new D4S JP amps use all SMD (surface mount) electronics, that's why they are so much smaller than previous half bridge amps with the same power. Incriminator said they are working on this as well and future amps may be half the size as well 😮
I have the incriminator 15.1 super nice amp
Yo it must be a beast. Dyno can only measure 15kW at 1 ohm and I knew this amp would overload it
That thing's is a monster! a portrait of power in blood! At 12 - 15 volts; this thing is a BEAST!!!
😎👍
Yeah, imma need 3 full time jobs for this amp and a revisitation of my old hobbies. Great video.
🤣👍
EXO is running several of these amps in his behemoth build with 12 18's. Holy shit that's gonna be crazy
my friend had a 4000.1 and it was an absolute beast, clamped well over 4k at 1ohm under 14v
If I'm not mistaken, the previous record was held by Craig Butler. He hit a 181. He did it with inxriminator amps as well but on DD subs!
👍
This might be top 5 amplifier u have ever showcased! These are quaility.
Damn that's massive power! For that type of wattage and build, that price doesn't really sound that crazy tho. Great info Big D!
I really like the idea of a taller, shorter amp. It opens up a lot in terms of installation limitations that other high output half bridge amps have due to their length. Incriminator branding just doesn't speak to me though so I've never given their gear a try.
Thanks for the feedback
I would just tell IA that amp got lost in the mail on the return shipping. Lol
Thanks for testing it, I was always wondering how powerful those amps are.
🤣
Yes!!! Been waiting for someone to do videos on this brand forever. I’ve seen the adds and been like whoa mama!!! This thing is a effing beasssssttt!!! Great video brotha!
Thanks for watching and commenting!
Dynamic is realistically all people should care about.. that’s what you actually are getting while listening to music.. people focused on rms which is great to paper numbers on a test tone.. but at say 100w you bouncing between 40-120 as the music plays certain notes and songs.. dynamic is where it’s at and the reason these are so widely used in spl is because of that.. simply they put a lot more effort into larger internal caps and coils.. = dynamic power and louder hits on music.. it also give you that extra for spl burps..
They never listen and say dynamic is useless…🤦♂️
Bump this amp on that Massive audio 12” sub in the all acrylic Gately box
It won’t fit unfortunately
Great review, important note: I noticed after I paused it at 9:20 mark on the left side of the intimidator sign of the caps that something that's squared looks kinda burned off maybe it's my viewing I don't know but I'd check it out if I were you but I know it's a year later so I hope you get to read or at least look into it, best of wishes Big D
I have this amp, still waiting on my subs from nick though. Cant wait to get it all installed!
Now that's a big boy audio amp, you know it's gonna do more then rated power all day long. Beautiful beast amp, looks well-engineered.
👌
Wow 184 db on 15k amazing. I love how fat and different this amp is. Very cool looking to me. Very expensive. The JP63 almost had it. I can't wait for comparison to JP83. 😁
Yes very amazing, which probably drives up price. 🤔
that is more than likely measuring power from one amp so it would be multiplied
@@SidyDidIt That makes sense.
@@SidyDidIt dunno forsure, Craig Butler did 182dB with 4 DD Z 18" subs on 4 5000W DD Z1A amps, that was pretty amazing back in the day
however this ofcourse needs the entire car to be turned into a giant enclosure, bolted shut etc so nothing can leak directly
@@BH4x0r and then you have Nathan millyard. 8 DD Z418s on 16 DD M8000s doing over 180 at ~50 hz. With plenty of bandwidth all the way down to like 18hz
That amp is a beast. Don't forget that price is a steal compared to the late 90's were you paid $1 per watt or more. GJ yet again hope you get that sub sponsor so you can use all that power. 👊
Thanks for watching and commenting!
for what its used for (and the extra money you'll be dumping in, considering) only downside i see is the remote voltmeter, but that's a minor quibble and easily fixed. and really, considering the output, it's a decently compact package compared to some i've seen at the same rating, that don't go as far over rated.
😬👍
Been waiting for you to dyno these amps for years. Best team out there hands down.
Thanks for watching and commenting
One of my customers has this amp and boy. This thing is a true power house!!
👌😬👍
Heck yeah Big D, I would love to see Jon Rabe over at SkyHigh send you one or two of those Trinity Audio monsters to showcase during your "do it bump tho" segments that would be sickkk also if you were able to get a custom box builder on board like our boy Bobby Gately possibly then you'd really be shaking some stuff!!!
I’ll send him a message
I love this Amp. I'm sold.
Your presentation skills are the best man !! Cracks me up all the time lol.
Love the content,
Keep it up man
Thanks for watching and commenting!
I've never been disappointed by anything from incriminator.
my first look at one in person, pretty legit!
I think a cool video would be your storage room with all of your amplifier stash 🔊🔊
Man let's see some old school Linear Power Amps.. those were the Supreme amps in the day!!
1995 Linear Power 2502iq Amp Dyno Test AD-1
czcams.com/video/Nzvv1eUPFvQ/video.html
Linear Power 8002 Amp Dyno Test Old School
czcams.com/video/Sp4DfOCE87w/video.html
17,000 watts was unheard of back in the early 90s WOW
Been saying for years incrimnator is the real deal.
👌😬👍
Love my IA amp. Got a 4 channel for my mids and highs and it has plenty of power and super clean sound.
👌😬👍
It's a BEAST FOR SURE!!!
👌😬👍
I believe EXO has 12 of the 6k on order can't wait to see them in action.
Heat and electronics never mix well, so the fact it stays cool is a huge plus
keeping your cool is always important 🤙
I thought Alan Dante had the record at 184.9?
lol nice naming, "Warden" subs. The guy that thought of it I hope he got a raise
😝👍
Revisiting this one. I have an old IA 20.1 that I used to run on an RE MT12 with dual .7 coils wired to .35
Surprised this one went into protect but I guess you dont really need to run the giant amps that low.
Keep your batteries charged, friends.
Dang you weren't given this one for the work and exposure.... hopefully its because they plan on hooking you up with the bigger model 💪😁
Thanks for the video Big D. Happy memorial day weekend to you
I don’t do paid reviews. That’s a commercial. Some mfg’s don’t want the amps back but that’s up to them and doesn’t effect the review
How many amps was the most u can see it pull ?
I remember being 23 years old and dreaming of having an IA 40.1. At the time (and still today even) the amount of money it took to buy the amp and supporting electrical system was out of budget. I wound up going from 2 eD nine.1s on 2 RE SX 15s to 2 Autotek MM4000s on 2 RE MTs. 800 bucks I paid for the pair of MM4000s. Great amps but not 40.1 great. Now 4k amps are everywhere and people are dreaming of 12k amps.
👌😬👍
0.67 resistive load is like a 0.1 ohm subwoofer... if they are running them at 0.3 ohm in competition, i would suspect with rise, its around 0.8 ohm
I would think the TL would show the impedance but that sounds about right. My sub wired to 0.5 stays 1-1.2 ohms
I have 2 IA Death Row 12's, very happy with them. IA is an Awesome Brand. If you have the cash, I wouldn't hesitate.
😬👍
Haven’t been actually into an amp design in awhile but this ...wow
👌😬👍
That amp is worth every bit of what they ask.
That is one serious amplifier!
👌😬👍
The only thing I don't like about your videos is NOTHING !! KEEP KILLIN IT BROTHER💯💯💯
Awe Jeah! Thanks man!
It's worth every penny. What a workhorse.
🤙
I'm sure it's an outstanding amplifier, but didn't the JP63 do about the same @ a better price and a better layout then being stacked? Have you tested the JP83?
Really sweet amp, these guys are fast becoming a dominant brand in the spl and bump market. Only thing that bummed me out is the remote, for that price and that level it should have a volt meter built in, kind of chincy there.
And they wanted my honest feedback so I gave it
@@wal as always Big D great job
You can try the lightning lab 8000 watts
I would love to see this amp on that massive 12" sub woofer in action!!!!!
Very nice.
Actually never heard of these amps before
😊👍
Love your videos I watch most of them. Anyway you can start testing 2ch stereo receivers? Old and new?
Thanks for the suggestion. See my Williston Audio EXTRAS channel
What a beast, I’ve always wondered about this specific amp what it could do. The bass remote looks identical to the soundqubed unit..🤔😶
I'm wondering if SQs new 6k amp is using the splitforce technology?
By any chance you are going to test the big boy 15.1.
That amp is a monster and a beast
😊👍
Can you test out the B52 Rc-1804 amp? Love the video man 🙏🏾
Thanks for the suggestion
That would be cool if you could do the soundqubed u series
Thanks for the suggestion
Most of da bidness 😂 that’s the one. That section of the amp is da bidness end. Thanks for another great video.
I love the engineering here
She's a beaut. I've always wondered why companies don't group the power and ground connections like that
I did not stress that enough! I love this feature
How the remote status work and you need led lights too run it
instant like! lets goooo!!!!
thanks for watching and commenting!
Incriminator makes some incredible products
I used to have a 8000watts amp + woofer p.m.p.o. weigh less than 2kg
What is powering the amplifier
Do you think their other IX amplifiers like the IX1.1 and IX2.1 will do over rating too?
Hi Big D, I Got 2 new Soundstream team x5.15 in ground shaker boxes that are both dule 1-ohm coils. I can set them up for 1 or .5 impedance,7000 rms and 15,000 peek. Please give me a shot at this. I would expect 140 DB + let me know what you think
I need help finding a good efficiency amp that's 3000 to 4000 Watts
I love that we have so many options now days. Even 5 yrs ago we didn't have a whole lot of choices. Even with all the bs in the world you can build a VERY powerful system for a couple grand or less depending on your taste and goals n the bass knob is the same you get with skar, synergy, ect. The two I have rn have lasted longer than rockfords $40 remote for sho
👌😬👍
hey there bro had a question about the fuses for these amps. i ordered the ix 6000 yesterday. would i use 3 200amp fuses on the 3 positive wires that go to this amp to equal up to 600amps. or 600amp fuses for all 3 positives wires?
Could you dyno a taramps bass 1200.1 I don’t see any video of a dyno
Correct me if I'm wrong, but I have not seen you do a video on any kind of Deaf Bonce products. Just throwing it out there for an idea.
thanks for the suggestion
subwoofers, especially in an SPL build are creating ALOT (like 10-20% or even more) total harmonic distortion, so having it under 1% THD in an SPL build is completely useless. Uncertified and Dynamic truly are the numbers that matter here. Now if you're doing an SQ build, then that's a different story, but for SPL, uncertified is where its at, and also dynamic for those burst tones. Humans cannot detect distortion in bass frequencies until around 10% or sometimes more.. so i see no problems here, this amp is exactly what you want, big dynamic numbers, how amazing for such a small package. I also LOVE that the power and ground are actually separated, its alot safer that way and more convenient.
my sentiments exactly
Incriminator makes the best amps on the market
👌
Yes that cool to see my amp get ran like this I have i6 reserved I wanted to send it in to get a test on it but seeing this is enough proof and I will have to get in on do it bump doe video
I simply can't test all models of all brands but I try to mix it up and test as many different ones as I can
@@wal that make sense. making these vids is tough enough as is and you do a dope job at it thanks again brother big D 🙏🏾
Carlos: “I’ll take 10!” 😐
👌😝👍
That is one strong amp and powerful.
💪😬👍
What is mirroring
would u ever do an amp review on a Visonik 4000xd?
Can you test the JL Audio JD500/1 amp dyno?
Im new to this car audio stuff just bought some 2× fi audio mt 4500rms 12inch subs was looking into this amp any recommendations on how many batteries looking into agm batteries should be ran? stock alternator for now thanks alot 🙏
any suggestions for a half decently priced 4 channel amp for a SQ build for my truck? list so far 4 sundown sa10's, audiocontrol dm-810 dsp, 2 sets component jbl gto609c 6.5 sets, and 200 pounds of sound deadener lol 1/2" thick around the hole truck to deaden the diesel engine. thanks
I wonder what the difference between the IX series amps and the IA series are