Installing 4” turbo back exhaust on 6.5 Diesel

Sdílet
Vložit

Komentáře • 15

  • @joestone2068
    @joestone2068 Před 2 lety +3

    That is a beautiful looking truck! I also like your hat 👍. What size is that new system?

    • @EliteDiesel01
      @EliteDiesel01  Před 2 lety

      Thank you! It’s a 3” down pipe to a 4” exhaust.

  • @josephreopelle211
    @josephreopelle211 Před rokem

    have an extended cab dually 6.5 and was thinking of getting this exhaust but having it dump right before the rear wheels

  • @chrispellicci6587
    @chrispellicci6587 Před měsícem

    Did you have a problem with the down pipe from the turbo hitting anything ( like something in the way). You had to modified the pipe ?

  • @gabex59
    @gabex59 Před rokem +1

    Where did you Get the clamps that you used? I am having the same problem with them sending me clamps that are too small for the joints 😊

  • @xcelerator67
    @xcelerator67 Před rokem +1

    Just out of curiosity is your engine a optimizer 6.5??

  • @Epad2116pineappl
    @Epad2116pineappl Před rokem +1

    What happened to the duramax swap? did you just put the 6.5 back in it ?

  • @hongmihnhahn7081
    @hongmihnhahn7081 Před 2 lety

    How about sound? Is it quieter comparing stock sound? My 6.5 TD is so loud now. I wanna buy DMAX muffler or BUS muffler?

    • @EliteDiesel01
      @EliteDiesel01  Před 2 lety +1

      It’s not as quite as stock exhaust but it’s a lot quieter then straight pipe with the stack.

    • @robertstiles626
      @robertstiles626 Před 2 lety +1

      What muffler is that from summit that you are using. Looks like a good muffler. I would like to put it on my truck any help would be appreciated thankyou

    • @hongmihnhahn7081
      @hongmihnhahn7081 Před 2 lety

      @@robertstiles626 for reference I bought walker BTM which has affordable and a little louder!

    • @EliteDiesel01
      @EliteDiesel01  Před 2 lety

      @@robertstiles626 I don’t know it just came with the complete turbo back exhaust kit I ordered from summit for my make and model truck. But if it helps the part number for the kit is SUM-680060

    • @mattphillippi5591
      @mattphillippi5591 Před rokem

      I just swapped to a stock duramax muffler with 3.5" downpipe back. In the cab it's stock sound except when you let off you get a little turbo whistle. Outside it's slightly louder than stock, you can hear the turbo now. This is on a 95 k3500 with gm4 turbo, basically everything is stock other than the exhaust. I did see a significant reduction in exhaust temp and back pressure while keeping it quiet.

  • @timteevin4517
    @timteevin4517 Před 6 měsíci

    Muffler?????