Can it be used with haltech elite1500 obd1? Home signal sensor still active in the distributor? Nevermind i found the installation instructions it sounds like it will work because its a hall sensor
I think it is a bad idea to have the circuit in a place as hot as the distributor. Has anyone had it installed for a while? I don't see videos of a clean start with this module, but I see that some modules are not there, they have problems with the push-button ignition or the remote ignition does not start the car immediately
He is actually not wrong. A wasted spark system fires two cylinders at once every time even though there's no compressed charge in one of the two cylinders. It is a very common ignition system in motorcycles all the way back to the early 2000s.
oem k20 coils are a very low performance. better if you have a option or other variant for smart coil (ign 1a) or a dumb coil so it can be enhance by a cdi box like FT spark or MSD dis4 switching from distributor to cop kit with k20 coils are such a waste money no HP gains just saying.
@@Casey_and_Cars I do my own research the only way k20 cop keep up to 900hp is they lower the spark gap. And I have seen no power gain by swapping to coil cop kit vs standard
Thanks for making this video I appreciate it
Sweet content! Definitely going to switch over to this unit 👍🏽
Back in the day when i was a kid in 2001 i used to run the msd 6a ignition kit. Look into that not a lot of people ran it.
what were your customers cars like? what was the power? & did tuning cars on this go well? thank you pls answer back 🙏🏻
Great vid bro
Thank you
does it come with wires to go to the spark plugs?
do one on the emu and explain some bits please
Wow thats great good stuff also have a ? It work for Hondata s300v3?
anything yet for the gsr if so I take one
hello how do I go about buying this kit?
Will it work for b-18c motor?
How much is the coil on plug for a 94 prelude h22
Do you still have to set the timing with a timing light and turning the distributor with this kit?
Yes
And how do you do the timing?
Where you located?
What else do I need to buy beside the coils? Is it compatible with my hondata s300 v3?
Yup works with OEM Ecus also
Can it be used with haltech elite1500 obd1? Home signal sensor still active in the distributor? Nevermind i found the installation instructions it sounds like it will work because its a hall sensor
Yes. It can be used with a completely stock, or aftermarket ecu
Can you explain the waste spark mode into detail. Is it bad or good. Can I use it on a stock motor? Can I use it on a daily car?
Not sure why you would put it on wasted spark. It gets half the time to charge the coils since it has to spark twice per cycle.
I think it is a bad idea to have the circuit in a place as hot as the distributor. Has anyone had it installed for a while? I don't see videos of a clean start with this module, but I see that some modules are not there, they have problems with the push-button ignition or the remote ignition does not start the car immediately
Se puede usar en sistema obd1 en ecu p28 con chip sin necesidad de modificar la ECU?
si se puede sin tocar la ecu
Do you need a tune once you do this
No
What kit is that
Snake 🐍
How much the price and how to be intouch from jamaica
Is it work on b20b rd1 engine
Must be a new product
Hey. Are these still available and if so can you please shoot me a dm?
Thanks
What’s the website???
You can order Through My IG
What coils do you use ?
K series or for the Sohc Guys D17s
NGK D17
What about for b16 what coils packs should I use?
@@Polo.316 Same ones. K series or D
@@Casey_and_Cars thank you
How do I order if I don't have Instagram?
9092052090
@@nemesis3888 Do you ship to Puerto Rico?
Why not show it. To install on an actual car instead of explaining it.
Bro 😂😂😂 doesn't even know how a 4 stroke motor works. Can anyone here tell me how 2 cylinders fire at the same time 😂😂
He is actually not wrong. A wasted spark system fires two cylinders at once every time even though there's no compressed charge in one of the two cylinders. It is a very common ignition system in motorcycles all the way back to the early 2000s.
oem k20 coils are a very low performance.
better if you have a option or other variant for smart coil (ign 1a) or a dumb coil so it can be enhance by a cdi box like FT spark or MSD dis4
switching from distributor to cop kit with k20 coils are such a waste money no HP gains
just saying.
Who told you that?
@@Casey_and_Cars I do my own research the only way k20 cop keep up to 900hp is they lower the spark gap. And I have seen no power gain by swapping to coil cop kit vs standard