DIY BATHTUB REGLAZING for BEGINNERS and PROFESSIONALS with DWIL TUB and TILE REFINISHING KIT
Vložit
- čas přidán 12. 10. 2023
- GET YOUR REFINISHING KIT HERE: bit.ly/3F3pBCh
White DWIL Tub and Tile Refinishing Kit
Use my code DPTubsReglazing30 to get 30% off
#dwilpaint #diy #furnitureflip #furnituremakeover #homedecor #budget #diy #bathtubreglazing #bathtubpaint
FOLLOW ME ON INSTAGRAM: / dp_tubs
Products Used in Videos on this Channel:
Material Used:
DCK Orbital Palm Sander: amzn.to/3crROIg
Titan Capspray Compressor and Spray Gun 75: amzn.to/3hOHr3P
Titan Capspray Compressor and Spray Gun 115: amzn.to/3rmhEm0
Bondo Fiberglass Resin: amzn.to/3rneluX
Bondo Fiberglass Mat: amzn.to/3nNUjXZ
Bondo Glass Short Strand: amzn.to/3xlYuh0
Ryobi Corded Drill: amzn.to/3xkf3K6
HDX Mixing Cup 32oz: amzn.to/3p0JD7L
2" Paint Brush 24pk: amzn.to/3nLdZMd
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet: amzn.to/312NYzi
Bondo Spreader Pack: amzn.to/3HNIEAJ
Bondo All-Purpose Putty: amzn.to/3CPE29p
Zinsser 1-2-3 Primer: amzn.to/3oXAmO2
Krylon Alternative: Rustoleum Tub and Tile White: amzn.to/3FFTcQi
Caulking DAP Stretch: amzn.to/30YsZhe
Napco Extra Strong Acid Etch: www.napcoltd.com/case-extra-s...
Jasco Paint and Epoxy Remover: amzn.to/3xniGik
Loctite Foam Gap Filler: amzn.to/3xkgTuu
Capspray Titan Compressor 75 / 95:
Titan 0524041 or 524041 Capspray Maxum II HVLP Spray Gun with Free Check Valve Kit 0297051: amzn.to/3CUJo38
3M Half Mask Reusable: amzn.to/3DSmomO
3M N95 Respirator Filter 10pk: amzn.to/3cNv9CI
3M Cartridge Replacement Pack: amzn.to/2ZpjhUq
Fume Exhauster 8" Duct Tubing: amzn.to/3cKe64v
Portable Ventilation Exhaust Fan here: amzn.to/3k5Gz5W
Tack Cloth: amzn.to/2Zks2yT
Rustoleum Appliance Spray White: amzn.to/3r8Iw8T
Due to factors beyond my control, I cannot guarantee against improper use of the information I share in my videos. DP Tubs assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not DP Tubs. - Jak na to + styl
Thank you! Just ordered! Will try DIY
Hey great video, question I only plan to do my bathrooms in my house only is there a budget gun I can get? Don’t wanna use the kit I like the spray look better
Does it matter what the tub is made of (metal, acrylic or whatever) as far as whether or not to do certain steps (for instance the acid wash) or are the steps all the same regardless of tub material?
hey man, how did ths product hold up to spraying? did you get 3 coats out of 1 kit? how long between coats to spray again?
How much time you wait inbetween the coats?
What do you think of the wipe on/spray on primers such as gorilla grip and cross-link three?
I would rather use a spray on Epoxy Primer than the wipe on. To me the wipe on primers are also considered adhesion promoters or bonding agents.
Great job as always 💜
Thank you!! 😊
Wow 😯 amazing work on this tub 🛁 It looked nasty before 🤢 now it’s like new 😀
Thank you 🤗
How much do you usually charge for this?
Your discount code isn't working on the Dwil site.
Is there a budget gun out there for DIY? Do you know if you can rent them from Lowes or Home Depot?? I have the *_UGLIEST_* beige tub and shower stall color in both of my old modular home bathrooms. I don’t think they’ve ever been refaced/reglazed before. This is the first in it’s 40 year life span. Your channel just made my month because I didn’t realize I could reface these busted ugly colors!! I thought it’d cost a small fortune to replace the tub and shower stall.
The whole bathroom needs to be redone, as well as the small guest bathroom in the main hallway, in my tiny and old AF modular home. My next research steps will be figuring out how to remove the ugly fixtures in the shower stall, acrylic sink, and standalone tub and replace with basic brushed chrome fixtures. After that, I will be finding out if I can tile over the laminate floor that seems to cover every inch of the flooring under my carpet and in my bathrooms. Then, I need to see how much a new white toilet would cost from the plumber since a plumber we had here once claims that regular toilets found in Lowe’s won’t fit in older modular homes(you bet your butt I’m going to measure and double check his ass). Then, I need to figure out how to DIY reface the ugly beige acrylic sink with a teeny tiny crack, remove the drain and fixtures and replace with basic brushed chrome from Lowe’s store brand if possible and either put a new counter on the sink area and maybe a counter on the lid on the storage box that’s next to the standalone tub and through a wall next to the sink cabinet, or, just buy a new bathroom sink and cabinet unit that’s likely to be a non-standard size since I live in a modular home. If I just replace the sink countertop, then I need to figure out where to get replacement cabinet doors that are more or less square. I’m *DETERMINED* to DIY as much of this as I can for under $1k. I wish I knew someone like you to ask what order I should be doing all this in after I repaint the walls.
Maybe I should find a DIY modular home remodel subreddit? I’m a high functioning, high IQ autistic woman who doesn’t work and wants to contribute to the household. I would love to try home improvement projects and play with tools. I am mechanically inclined as I built my own PC, and remember and enjoyed wood and metal shop in school. My step father growing up was a carpenter so I learned some stuff from him as well. I really think I can do this. If I can finish the bathroom, I can re-carpet and paint the other rooms, refloor the laundry room and kitchen laminate flooring, and figure out what to do about the cabinets in the kitchen that someone painted that were originally covered with glossy fake wood covering of some kind. It wasn’t removed or sanded well enough so, now, the paint on the cabinets is starting to peel. I just want to re-do as much of this crappy house as I can in 3-4 years with as little cash as possible. Wish me luck. I’m going to need it.
Wagner Flexio could work for a quick DIY!
Love your work ! Quick questions ,
Which HVLP do you prefer?
And is Titan capspray 115 and good sprayer.
Yes the 115 is a great sprayer and I definitely prefer Titan Capspray
Thank you brother
What size nozzle?
Always be careful not to get acid in the tile as it will etch them and you don’t want that
can you use this on an enamled snk?
Yes you can
Where can I find that tub and tile paint?
It’s on Amazon
1 kit makes enough for 1 tub?
Meaning you used all of it? Thank you
Yes ..there was some left over but I like to give three-four coats of coverage
At what point or in what situation(s) do you recommend a person hire a professional instead of diy?
The point of overspending on equipment and material.
138
So you didnt take the track off? So, if someone took that off there would be a memory strip of the old tub. This is the kinda shit, that a homeowner pays for a job and Mr. Jack Leg 🦵 🤔 comes along and paints OVER the track, giving a Jack Leg job. Hope you didnt charge that much for an "almost done" job...
Homeowner didn’t want track removed! If the track is removed they would most likely have to purchase a new one or eliminate it completely. Some tracks often bend or tweak when removed depending on how they are installed. Some have silicone or glues that cause them to bend when being removed.
This is probably the most “jack leg” comment I have ever record! You’re “Frieda” say what you want but you are highly misinformed! lol 😂