How to install bluetooth module to any speaker system I Altec Lansing ATP3 I
Vložit
- čas přidán 26. 08. 2024
- This video is all about the installation process of bluetooth audio receiver MH M28 into a computer speaker system (Altec Lansing ATP3). This speaker system only had 3.5mm wired audio jack available on it. The quality of this speaker is exceptional and the bass is remarkable for an entry level speaker set. So, I think this one deserves an upgrade or modification because it's totally worth it. This video is not applicable on ATP3 speakers only but to other brands/models speaker audio system also that has no wireless audio receiving capabilities.
In this video, you might learn techniques in doing this that you might apply to your DIY projects also. The supply voltage of the speaker is roughly between 12-15V DC in the secondary. Yes, it uses a linear EI core transformers and I'm not really sure on it's voltage rating. However, it manage to work with no problem on my DIY 12V battery pack • How to make a battery ... . I want it also to work without connecting on AC mains so that I'll still be able to use it on a place where there's no source of electricity but only batteries.
The 3.5mm jack wired audio source function was not removed. I just added push button switch so that I can choose from two audio source namely wireless bluetooth audio and the wired source. The bluetooth module only gets powered when switch is set to bluetooth mode. That's why we need at least 12 pins for push button switch or slide switch. Note that it can be done using a 12 pins push button switch however I only manage to obtain a 24 pins switch on my local store.
You can find the schematic diagram here (facebook link): bit.ly/332PKfT
I hope you like it. Please subscribe, like and share for more videos.
Audio tracks:
--------------------------------------
Eveningland - Love now
Eveningland - Express
Eveningland - Rev
--------------------------------------
Track: Tobu - Candyland
Watch: • Video
Download: ncs.io/candyland
--------------------------------------
Track: Spektrem - Shine
Watch: • Spektrem - Shine | Pro...
Download: ncs.io/shine
-------------------------------------- - Věda a technologie
The best 2.1 speaker of it's time. Mine is 19 years old and still sitting on my desk. Later models were low quality. Altec Lancing committed suicide.
True
Mine still rocks today....from 2006
prefer 621 than atp3.
I miss those days when altec lansing still produce high quality desktop speakers. I want to upgrade my atp3 to another altec lansing speaker, but today, there's no better options available from altec lansing 😔
@@blebel224 I replaced mine with Edifier 1855D + Edifier T5 Subwoofer.
How to get 12v source so i can put my usb bluetooth module can you teach me how.thank you
Hi where i can get the processor for this speaker system?
Awesome build........but an inbuilt 12V AC to DC module would have been nice instead of an external 12V DC jack.
Must be cool to be good at this type of stuff
Good and neat work.
this video make the beginners confuse?, why making the installation too complicated, instead of using mp3 Bluetooth module with fm radio, you can buy it from shopee or lazada for 120pesos or 2dollars and for the battery why it is external?
Can u please tell us a circuit to only play it with 12 v battery ?
my atp3 is having a trouble with the woofer. when switched on and after few seconds the woofer stops producing bass,but the other two speakers works properly
Most problem I encountered on this type of speaker system is the wire. The one with the volume, treble and bass. Mostly near the connector end which is disconnected. However, as you said that the other two speakers has no problem. You can manually check the subwoofer speaker using a multimeter if it works fine then later check the amplifier IC's. I wont suggest you to open it but if have enough knowledge in repair and troubleshooting electronics then I think you can fix it.
@@diyexplorer8728 If it can be a case like the connector having a problem
@@diyexplorer8728 and some times the woofer suddenly produce sound for 1 or 2 sec ,its not to be frequent its happenning very rarely ,
can i get a whats app contact of you
Ayus sir, meron din po ako lantic lasing na 2nd hand baka po pwede paturo sayu mag convert na pang bluetoot, sira narin kasi control nito
thermal grease direct to pcb. YEAH. UR DA MAN. FFS
Adakah jual konektor nya mas ?
My right speaker not working waht to do
Gurrrr coming the wofer wt problums sir
Hello sir
Hope you are fine
I have a sample problem,i hava a altac ATP3 speaker,whose volume controller input cot is lost,which i send thtougy the picture,In particular, I would like to request you to show in video size what you will think of the 9 main volume conventions of the volume controlla
i will be opening mine soon to try to eliminate a hummm noise, what is exactly that you need_?
@@90210sky mine also produce low hum noise when the speaker is on. any idea how to repair it?
@@TionoTan i noticed the hummmm is only happening when my ATP3 is connected to my computer, if I connect it to my iPhone the hummmm is gone, so the problem is in my computer.
@@90210sky sir visit electronic G-LAB in youtube there are many tutorial video from basic to complicated repair.
@@TionoTan also Visit Giovanni V. in youtube this man is and expert.
Pwede ba rca sa altec atp3 or sa v4121?
3.5mm jack ang input nya. Pero pwede ka gumamit ng RCA to 3.5mm plug sa ATP3.
मुझे atp3 मॉडेल सिस्टीम चाहिए
कहा मिलेगी?
How do you access the pair button on the BT module once you close it?
This version doesn't have pair button. Once you power ON the bluetooth module, it's ready to pair or it will connect directly if paired already.
Please simplify for the beginner bluetooth connections like me
I Have THIS MY Right Speaker Does not work how to open it pls tell I can't open
My right speaker also not work please help me sir
Please
Please contact me if you open your right speaker
Please
My Whatsapp no. 7048306945
How about the sound quality?
It's fair enough. If I power it with the AC, I noticed low level noise. But when using a battery, I can barely notice it. I think it's common downside of these cheap modules out there. But still works great.
Sir please help me
Please open right speaker
I have no any idea
Please help
My right speaker not work
Please
Please
Please 😢😢😢😢😢
I like the vs4121 better
Pls add new about right speaker
gan mau tanya biaya nya berpa ya..dan no WA nya dong
The bt module is 3.3usd bro. I just use other electronics parts in this video from old electronics board. Gan I don't use WA.