Completed Stan Meyer Injector. RWGresearch.com
Vložit
- čas přidán 11. 02. 2015
- Completed Stan Meyer Injector. RWGresearch.com
I must thank you Scot who has slaved over this injector to get it done! there were also others hands on this project, and my thank you go's out to you! you all know who you are.
I will test this injector when i have time. unfortunately i have priority things that i must do first...
for more information on this injector:
rwgresearch.com/open-projects/...
God Bless,
~Russ Gries - Věda a technologie
Finally, you're not wasting your time on extruder but paying attention to some promising stuff. Keep going, focus your genius mind on this thing.
From an machinist to another machinist, that is an amazing job!!
I have to agree.
Awsome job Scott.. that injector looks perfect!
What all is required in the setup of an engine along with the injector? I understand the Multi-Coil is needed as well, but I do not know if anything else is required as well. I saw a different video where you showcase many of Stanley's inventions, and was confused on what parts are needed for the final result of a working car. I am very interested in this project and would be inclined on testing as well. Very interesting work, and amazing craftsmanship.
RWGeeWhiZzzz. I am speechless to stumble across this. Stand Meyer LIVES in our harts. Major Hi 5's to all that contributed. you'll be hearing from me. ~ your neighbor.
curious to know if something else like silicone could be used instead of micar?
I've seen silicone blocks used as a smelt for temperatures over 1000o and not sustain anything even close to warping.
Hi Russ.
Do you have a working VIC circuit? just wondering :)
You and your buddys have made alot of devices like the injectors, WFC and EPG, but without the VIC these things cannot work, how far have you guys come in this area at this point?
Btw love your videos :)
Looks promising! But you've never made a video about this injector again!? What happened to the Stan Meyer technology research??
Ok so its a year later now after u say had scott slave over it. Any results?
Nice machining. @ 3:21 - How were the thin slice cuts made on the inside, from the center outward? Just a very small bit?
Where is the video of you testing it? This video is 2 years old
did you test it out on water powered car? it would have been nice to see it work!
the only thing that is needed for the car to work only with water, actually with water becomes hydrogen from a high frequency electrolysis, it is a resistive capacitor inside the water, the high frequency produces ozone in the environment, the high frequency in the water produces ozone to this happens that it is hydrogen, it is pure combustion, what happens that in order for it to fully work with water, it has to produce many liters of hydrogen per minute, and with the current devices, the circuits become too hot and can not stand, this happens because they use positive energy, they have to have high frequency with negative pulses, not positive, that's why don smith put the diode upside down, stanley meyer told him this, so that instead of positive, polarity and negative length this makes the circuit cold and thus works very well without heating, and the other is to put it high frequency, but with a coil that has wave cancellation, this is achieved with a cross winding that form rhombuses, diamonds, this produces a scalar wave, this is gravitational wave, it is faster than the speed of light, it is instantaneous and super hyper powerful and it is cold energy, it is the way to be able to make a car totally hydrogen
Opa vamos trocar uma ideia?
Why you didn't test it ?
i understand that stanley's nozzle uses water, hho and super heated steam. my question is how did he make super heated steam for the nozzle? thank you.. I suspect that it is within the nozzle and you shown it in your previous post. kindly post again..
Forgive me as im new to this however the whole injector very much resembles an over engineered gun bolt/fire pin assembly? is their a link, was stanley a gun buff.
your an idiot
Any updates?
Would love to hear your progress..
Send it out to me I´ll tested for you! Can´t wait any longer bro!
Russ, I think you have to put a circlip to hold the spring inside the hole because otherwise it will impede the water flow to the quenching slots...Remember that video I directed you to where Stan briefly showed the water injector apart before he screwed it together..??..if the spring wasn't secured it would have fallen out from the angle he was holding it.
That’s an interesting item. I can’t see how it would work. No injection back pressure seals ball and spring do nothing. There’s stuff missing . How did you find the design ?
You have it for over a year now. Does it work?
INDEED?... I MEAN, WTF
Any updates on progress Russ?
Hola amigo lo vas usar con alta frecuencia como los cortador de plasma
Can you buy the complete set for a 6 cylinder say Camry? part number for spark plug is NGK IFR 6aT11/ 4589and Denso injector part # is 23250-20010.
this really works? as I can install this on my car? where I can get the instructions? regards
what is the update on this ? what was the final word on it, did it work ?
You have it for over a three years now. Does it work?
Very cool Russ! Thanks for sharing.
Been asking and almost demanding an update for about a year. And Russ never gave an update or even an email. So, we decided to make them ourselves. And better than his too!. www.stanmeyersparkplug.com
Stan Meyers Spark Plugs You both have the same design flaw as you both went off of the person's re-designed of the injectors who didn't understand the technology very well. Basically he was unqualified to make changes to the design and no one caught the flaw he made. Now I am willing to help the both of you but will require you to act like a business and make me an offer for my counsel. You can send your offers here: www.truegreensolutions.net/index.php?p=1_3_Contact-Us
This way you can have access to the needed info to make these things work correctly and do so in the proper way business is supposed to be conducted.
same question...DOES IT WORK??????
it will take me some time to test this the way i intend to... so yeah... slow but sure.. ~Russ
I hear ya, small steps as that's the way these things go. Now you have to get the VIC back up and running and figure out it's opening pressure so that a pump can be matched up to it. All the while finding and/or determining it's resonance and standing wave frequencies with the VIC. As Meyer would say, "Much work remains." The thing that is missing from all of this is the voltage to amount of water breakdown rate as not even I have those numbers as of yet. Best of luck with your efforts.
+rwg42985 stan said the secret to unlocking the atomic power of water was to prevent the water molecule from forming dring burn.my question is how?
+Paul Lower You know what? Tesla had it right. You know how long our Gov. has known? Think back to the first Hydrogen Bomb.
Paul Lower Russ has no idea how Meyer did this or doesn't care to answer your question so I will answer it for you. To do this it is the job of the Gas Processor as it pulls the electrons away from the oxygen atoms and then sends them down to the combustion chamber to be reacted with the hydrogen gas atoms. When the unstable oxygen gas atoms are sparked in the presence of hydrogen the water molecules must form but it is now missing electrons and it is the hydrogen atoms job to come up with these missing electrons which prolongs the formation of the water molecules until all the missing electrons are produce from the zero point by the hydrogen atoms.
+Edward Mitchell your first statment is false. if your going to respond to people at least stick to the facts. ~Russ
I would love to try this out on a four stroke engine.. or two stroke for that matter
I am thinking to use this on a power generator 2 stroke, which should be pretty simple, I need one made for a power generator!!!!
hello have you tested to see if it works please give an update thanks
So, how has it worked and performed?
Ok, so did you ever do anything with it?
Where can I buy one of these?
So four years still nothing
Fortis Fortuna Adiuvat the oil companies probably killed him
Ive no dout the fuel companys knocked him off.
9 years later Im still waiting testing?
Please test on a 390cc Honda 1 cylinder?
Never drink cranberry juice. I wish you many years ..... :)
Very interesting projects!
why dont drink cranberry juice?
@@incorectulpolitic that's what stanley meyer was drinking before he was allegedly poisoned
@@lwill4075 well. i am sure unpoisoned cranberry juice is fine
whats with the fedora though?
Where can we purchase them and for how much
this is where forensic science will come in handy hope they get started soon
shut up
Very nicely skilled piece of work. Great! Wonderful! Duh! But what does it do?
So, what happened? It's been 3 years and nothing..
Is there a chance I could get a water in injector fuel cell
So its just a hydrogen gas injector with an arestor ball and spring?
I always thought it was a device that performed lightning fast disassociation of the water molecule.
That's so cool. Thank you
BUEN PROYECTO !!!! SALUDOS DESDE MEXICO
Most of the images are no longer visible on your site and also the pdf files say they are no longer available. Please let me know how I can obtain this information and please don't tell me you were contacted by some three letter agency to remove them somehow....blessings
Are you ever going to test this?
Russ what's going on with the injector
Hey. Are you still doing this? Do you have a car running off of this?
who sells them,and how much would it cost,
thanks for your videos,greetings
If you found out, please let me know, need one for a power generator
Where to buy this?
Any update with this?
any update after 5 years?
Well, lets see it in Action. Does it work? Or you just going to show the injector?
How do I get my hands on those
What did that cost ?
that was 2015, so what is the story so far?
How do I find this
Where is the video of you testing it? This video is 5 years old
Would you sell that injector?
¿vendes o puedes vender estos inyectores? o como puedo fabricaaros gracias
Interested on any updates I haven't found any. I'm hoping to try to get an injector or 4. To test myself. You
What's fabrication costs? you can form letter me I don't care
Any updates?
So is this real or not? Can a vehicle run on a supply of hydrogen that is created on demand by electrolysis?
Did he ever test this?
Haven;'t seen you in a long time. You okay buddy???
let us know when you will have a model ready to test, I would like to get one and assist you
Does it work
Does it work?
OK. you completed over 1 year ago...now the million dollar questions.....
DOES IT WORK??????
Or is this all bunk?
Eval Uator think it’s all bunk
Thats exactly what I want to know!!! You can tell when something is a joke when they leave this important part out. If it worked that would be the only thing they would talk about. Theyd be showing it running and theyd be all excited and talking about getting them mass produced so you and i could buy them.. oh but hes got better things to do..🙄
@@lovetofly32 Good people would try to tell the world about it if it worked because they want to make the world a better place, unless they are afraid for their well being. People seem to disappear when they discover things like this and talk too much about it. Just saying
@@KrisBarton432 see my post, main thread not reply, I'm not worried about well being, and I have a plan to Disguise it as something else that will make it go viral as a parlor trick being that the flame burns cold, then once its went viral, let people know it can run an engine
@Rik rik Awesome!!!!
You rule Russ!👊
you test it yet?
HI Russ
Have you tested the injector / mail me pl - thanks
Was this ever tested... or?
CUAL ES EL PRECIO DEL INYECTOR Y SI PUEDES ENVIARMELO AQUI EN SAN LUIS POTOSI MEXICO
I wonder if you have stopped this project.
very nice!
Did it work
Why can’t we see it working on an engine!?
very cool!
Good job
En donde los venden???$$$$$$$$$$$$
Amazing perfect 🤗
Wheres the test video , and how come you wont respond to my email ??
can I bay????
FANTASTIC.. GOOD LUCK.. KEEP MOVING FORWARD.. SCREW THE HOUSEWORK IF YOU CAN DEMONSTRATE A MACHINE THAT RUNS ON WATER... WGAF ABOUT A FEW DIRTY DISHES, GET ON IT!
Blimey this vid is 3 years old, why is there no vids since this of the test???
Ok I will wait
Is this guy dead or what?
It is 2019 . . . helllloooooooo????
any update?
I have the same question.....
Try a printing plastic part machine, may be even easier yet
Soon enough when I can take enough time off of my OTR truck driving job (likely just quit (with notice)) I'm about to design something that will blow Stanley Meyer's design out of the water... pun intended,, but for real, small compact Hydrogen ion generator, very powerful. Once I cant tweak it any more and it's the best it can be, design will be open and free, and I'm going to force it to go viral
czcams.com/video/hPM1l93mGZw/video.html
@AcoolCat I haven't gotten started, I'm still Trucking, living in the truck. But I am a lot closer to being able to retire, then I'm definitely getting started on it!
Test it when you have time? You have better things to do? Yeah OK lmao!
bill R EXACTLY my thought, what could be more important than a device that can make a car run on water from the tank and made into Hydrogen in the injector?
@@Kiyarose3999 not ownly that it's suppose to cause a :"Hydrogen Thermo Explosion with resonance in the cylinders, No sparkplug needed and it would work in a diesel engine". stan's been sued for fraud ,he would never let an expert/scientist(sent by PPl who wanted to invest in it) take a look at it while it had already been patented. He would only run the car on the road for TV News. It was never running for the closeful eyed ppl (Expert) only Idling with a Hydrogen Gen/bubbler next to it. He would never show the car under a load(driving) and thats the real test. Almost any car can idle on hydrogen
I believe back then stan wasn't telling the whole truth.
Complex One Have you seen the vid of SM using his ‘Hydrogen injector device on a Buggy’ ?
This is old but to the new viewers, this is where you offer to pay this fraudster so he can further his "groundbreaking" work.
Stan Myers operated this same way lol. Go look it up.
When investors & scholars demanded he present evidence of his machinery EVERY TIME he gave excuses & never actually did show anybody definitive proof of anything he claimed.
When I try to do a bunch of research I just get a bunch of BS from him like look at all his other little blueprints that are completely unrelated. Just silly.
i like this spark plug
Necesito ese inyector
OMG good work
Stray water in a focused point yes... The injector works as it's designed. The rest of the technology is needed for the system to eject "thermal explosive energy".
ok, it's a good start anyway
Cannot contact via email need drawings
vc n mostrou funcionando