Replacing Lower Control Arms on a Subaru Legacy (WARNING... RUST BELT CAR!)
Vložit
- čas přidán 3. 06. 2023
- In this video, we are replacing the front lower control arms on a 2013 Subaru Legacy 2.5i, which is similar to the process used on an Outback, Forester, or Impreza. I will show you how to remove a stuck ball joint in the process, or how to replace the control arm without removing the ball joint. The reason for replacing the control arm is because the rear bushing was dry rotted and needed replaced.
Products Used:
Astro Pneumatic Tool 78620 Subaru Ball Joint Puller: amzn.to/3IS4EfK
MOOG RK623344 Control Arm Assembly: amzn.to/42noqqj
MOOG RK623343 Control Arm Assembly: amzn.to/43rG25N
2x MOOG Sway Bar End Link: amzn.to/3C9ncnQ
Neiko 00206A 1/2" Breaker Bar: amzn.to/3qg6tfZ
ARES 12016-15/16-inch Pickle Fork Ball Joint Separator: amzn.to/43npEDd
Makita XDT131 18V LXT® Lithium-Ion Brushless Cordless Impact Driver Kit: amzn.to/42o8STa
Similar Large Pry Bar: amzn.to/43t9nNq
PB Blaster: amzn.to/45JJQAY - Věda a technologie
"a car this old..." I came searching for insight on replacing them in my '99 legacy 😂
Thanks for this video bro, garage quoted me a ridiculous price to replace the bushes on the suspension arm so I just thought in for a penny and change the whole thing. Thanks for the helpful and clear to understand video.
Thank you! It is a tough job but with the right tools it isn't bad. And you can literally buy all of the right tools from scratch and still come out way ahead financially.
Thanks for showing this, I have the same generation legacy 2010 and I need new control arms too.
Good job…. Thanks.
I have a Question does 2010 legacy 2.5 Shocks absorber fits on 2010 Outback? Since they are both the same platform & interior?
Thanks
Was wondering what it was, turning a bit harder than needed at 80+mph had it shaking, had me worried but getting it fixed asap, thanks for the video
You should really feel it in the steering wheel, especially if you are hitting bumps at speed. If the road is smooth and straight you probably wouldn't notice anything wrong. If it is an out of balance wheel it will shake more as you speed up, regardless of road conditions, and a warped rotor will shake when braking. Those are probably the big three common sources of shake. If it is turning really hard when going slow it may be a power steering pump or just a Subaru. I find that Subarus really have stiff steering compared to a lot of newer steer by wire cars
Wish mine did that at 80+ it’s getting worse mine starts shaking at 47+. Getting it fixed this week tho!
Same issue w my crosstrek. Vibrates when turning to the left doing close to 80 on the hwy. Hopefully the ball joint is still solid so I don't have to pop out
@misterfakeid Damn, definitely get that done asap brother
@@tryxjay8289 yea. I'll order the parts now since it's finally getting warmer outside
Where can I find those bolts at it, ended up breaking on me
Your best bet is probably a subaru dealer (unfortunately). I have been able to find obscure subaru bolts on ebay also.
Doing this now...bolts are frozen in the bushing sleeve...fun....🤣...not at all...and the bolts thru ball joint were snapped off...had to drill them out...more fun...
Hahaha, welcome to the fun world of Subaru suspension work.
@@CoolStuffGuysLike better not tell him about the Jesus bolts in the rear suspension...
I think Subaru oxidizes all their suspension nuts and bolts before assembly. Worst cars to do suspension work on
Lol, I think you are on to something.
Yeah. Subaru throws them in a salt fog bath for a year before putting things together. 😂. But. In all seriousness, most Subarus live where there is salt.
Alman ve Amerikan endüstrilerini küçük düşüren ve ezen o güçlü araba olan Japon Subaru ile alay ettiğinizi görüyorum.Japon arabası kötüyse, onu neden Amerika'ya ithal edesiniz?