SCX24 Slymeballz!!! 1.0 No foams are here! First Look!!!
Vložit
- čas přidán 27. 02. 2022
- Checking out the Slymeballz from Flubber Stufferz! Any foams for the scx24 are here! Check them out!
Slymeballz available here
flubberstufferz.com/
HELP SUPPORT the channel by clicking my affiliate links below to amainhobbies or amazon and then shopping at no extra cost to you!
Thanks for any help!
Amainhobbies affiliate link here
bit.ly/3CcTUCN
Amazon affiliate link here
amzn.to/3hohoNd
Don’t forget the discount code 2fmrc when checking out at most of your favorite places like Furitek,fullsendrc,MofoRC etc. it may just save you a little cash!
SOME OF MY FAV UPGRADES FOUND BELOW!
Work mat I’m using (and LOVE) found here
amzn.to/3ACRBsU
Treal B Type beadlock wheels found here
amzn.to/34CpbEc
Treal aluminum high clearance links found here
amzn.to/3jZd1KO
Hot Racing high clearance links (Deadbolt) found here
www.ebay.com/itm/Hot-Racing-A...
Emax digital steering servo found here
bit.ly/3wdd7lp
Emax analog servo found here
bit.ly/3uVK6Jy
Rc4wd 1.2 tires found here
bit.ly/3qQJmFd
Hot Racing aluminum steering links found here
bit.ly/3pKyMiy
Treal brass diff cover found here
amzn.to/2UrPZBx
Treal brass steering knuckles found here
amzn.to/2TXpaVI
Treal brass extended wheel hubs found here
amzn.to/3zXLS0A
Treal overdrive gears found here
amzn.to/3xS5Doq
Treal high clearance links found here
amzn.to/3vVo61O
Treal wheels found here
amzn.to/2T3hdOw
Hot racing aluminum steering links here
bit.ly/3pKyMiy
Rc4wd Patagonia tires found here
amzn.to/3qpGizu
Don’t forget to use the discount code 2fmrc at fullsendrc.com for 15% off your order!
Don’t forget the amainhobbies affiliate links! If you need anything let me know and I’ll get ya a link! You can get to amazon through the link below and help out the channel as well. Thanks so much for the support and as always, hit me up if you have any questions or anything!
amzn.to/3x1HRX2
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ - Zábava
Likely not news to you but thought I'd throw this out there for others that may not be aware... A short length of fishing line (adjust length to your preference) running from the center front edge of your ESC tray, down to the center rear of the servo mount, will stop the front from unloading on steep climbs as shown in this video. BUT, because it's located at the center pivot point of the front axle will have little to no negative effect on articulation. Much more useful than running limit straps or rubber bands at the shock locations, IMO, as that DOES inhibit front axle articulation. Very simple to do, and essentially free. Just a drill a small hole in the center at each location, run a short piece of fishing line through them and start experimenting with length until you get what you like. Once you have it the way you like it, place a little spot of hot glue (or Shoe Goo) at each point to set the length, and trim away the excess to tidy things up. Wham bam, thank you mam! Keeps the front planted and no more hyper extension of the front shocks on climbs.
Yeah I talked about that a bit in my Injora shock vid. I just don’t care for any style of limit strap. It still lets the body roll side to side a lot on side hill situations. I just prefer to run a forced droop setup in the front that holds tight but still allows the flex when needed. Whatever works works though! I just hate limit straps and I’m not really sure why 😆
@@2fmrc Yeah, I get it. Do you have a video where you describe your preferred forced droop setup in detail? Currently planning my next build and always looking for new ideas. And some of your rigs do really really well! I did stumble upon a video recently where the builder used a secondary servo to suck the chassis down tight when the situation demanded, and then free everything up for full articulation when desired. Not sure how well it would work in practice, but it did look very interesting in the video. I may have to give that a try at some point just to play with something new...
@@michaelc3416 yeah I’ve seen a few people do that with the servos. Kinda like dig on these rigs though. I just don’t really want that extra weight of a servo mounted anywhere but the axle lol. I talk about the setup I’m running on most of my trucks in this vid. I’ve had great results with it so far. My latest build with the portals in the rear has this setup and is probably the most capable 1/24 I’ve seen in person lol. I’m sure someone has em more capable but it’s a beast for sure! Especially to be a fairly simple rig running a body.
SCX24 Injora Internal spring setup-Forced droop Bronco mod & how to
czcams.com/video/He-cJNK9K0k/video.html
@@2fmrc Thanks for the link. Great info! And yeah, the weight of a high mounted servo was my consideration as well with the servo suck down thing. You have a lot more experience with these little things obviously, and I've only seen it done once. Just thought it was pretty cool for certain applications. You know how it is when you first see something new to you and think, "Wow, never thought of that before...". But yeah, that's why I keep watching your videos, and keep learning... Peace.
Awesome to see these on the 24th scales. Definitely gotta do some more testing. Side hills and conformity (when they’re on the car) would be awesome to see 😁
THAT IS WHY I SWAPPED TO SHORTER SHOCKS IN FRONT AND PUT A LIMIT STRAP IN THE CENTER OF THE REAR. THE REAR WILL ONLY POP UP STOCK HEIGHT ON DECENT BUT, THEY FLEX ND REACH FURTHER FOR TERRAIN BY PIVOTING IN THE CENTER. THANK YOU FOR THE REVIEW, I HAVE TO GET THE 3D PRINTED INSERTS FOR MY CRAWLERS NOW.
Thank you for always having thurough in depth vids that give me a sample, and answer most qurstions that pop up in my head before purchase
I appreciate the comment and the view! I sometimes feel like I don’t give a ton of info so always good to know it helped someone a bit.
Wow those sold out quick! I found out about them a couple of days ago. This morning they were in stock, now all gone before I could get home to measure my inner rings lol. Crazy. Hope they can keep up with demand!
Yeah I’d say they will be sold out often lol
Chris is really good at keeping up he has a lot of printers, he’s just one person so obviously he’s not going to have thousands
I am not into limiting straps either.
I have not been paying attention and didn't know these existed. Thanks for making the video Matt.
Those are sweet bro....I never thought about a foam being like that....I'd love to try them
Love it I tried to order some but I cannot yet it was a week or so ago they said they drop Sunday and still said out of stock so I can’t wait!!
Those would be handy for my scx24.
No filler is best i find, and drilled rims
I was really interested in these after I saw west desert wheelers video about them on 10th scale. But non were available for 24s at the time so I took the foams out of my Chyrax. And I’ve actually been so happy with them foamless. The 24th scales actually doesn’t have enough weight to roll over the tires as it is unless you’re in a really awkward bind. The only time I’ve seen my sidewalls give so far was a side hill I was already falling off of
DO YOU HAVE TO CHYRAX ON THE 24TH OR 10TH SCALE? I FOUND THE 10TH TO BE OKAY BUT THE 24TH WAS NO GOOD.
@@peteragnello9398 24th but i vented mine and took the foams out
Great vid Matt. $30 for 1 set. That's more than a set of the steelies for foams. Sold out.
AS SOMEONE WHO HAD A MANUFACTURING COMPANY IN THE PAST I CAN SAY. IT IS HARD TO KEEP RESALE PRICES DOWN WHEN MANUFACTURING TIME IS HIGH. BUT, IT LOOKS LIKE HE IS HAVING NO PROBLEMS SELLING AT THIS PRICE NOW. SOON CHINA WILL GET INTO THE GAME WITH MASS PRODUCTION AND THEY WILL BE CHEAPER AND STRONGER.
those could be a game changer, thanks for showing them !!
Yes chris carother from everything ive seen and order from him ive seen good quality and top notch service awsome guy i cant wait to order these next
If you ever go no spring and such, run some jewelry chain instead of shocks. Basically can adjust link by link and have no flex binding from the shocks not wanting to comply.
Was waiting for something like that since the moment Antis came out. Doubt I’ll be getting them anytime soon in uk with current shipping but I’ll wait to maybe have one of vendors carry them.
Still Gona try print mine with tpu regardless
That's epic bro, thanks for sharing 😎👍
Limit the middle of the axles. Will keep it from unloading, but will not hinder the flex. Love the videos!
Yeah I just hate the look of limit straps lol
@@2fmrc thats fair, Cant wait to see whats next! Have a good weekend brother.
@@strapped_6159 same to ya!
Same wheels (even same color), same tires, and same inserts I just ordered. Can't wait to get these on a truck.
Hey mat I am having some furitek lizard problems trying to run it with a castle motor but it’s just kind of stuttering was wondering if u had any advice
Have you tried the overdrive transmission yet? I picked one up but I haven't installed it yet
is there some of these for the island wheels? if not have you found a good option? im gonna be buying the island wheels soon
So that's what you where talking about when sticking with the 3D printer you bought unless the resin printer. Those are bad A$$ to say the least. I love how they hold up on the side hill. I have been combating that with tuning discs in the foam and then fighting to get the bead lock set. Thanks for the great video and bringing the latest and greatest to us and thank you for keeping my bank about empty.......LOL. If you where really interesting in increasing your climb angle you need to raise the rear upper links higher at the skid plate. The rule of thumb for the distance of link separation at the axle is equal to 1/4 the diameter of the tire. IE: 2 inch diameter tire = 1/2 inch separation. Keep up the great work!!!
YOU ARE SAYING TOP OF SHOCK 1/4 OF TIRE HEIGHT MEASURED FROM TOP OF AXLE OR CENTER AXLE? I WOULD LOVE TO FIND A SIMPLE WAY TO TUNE SHOCK MOUNTING. I AM WITH YOU ON THE FRUSTRATION OF TIRE MOUNTING. I JUST BUY MORE AND MOVE ON LOL
Use rubberbands on both axels
Yeah I’m just not much on the limit straps. Hate the way they look lol
Maybe instead of messing with shorter shocks, for a quick a-b test throw like a zip tie or something from the front axle to the chassis as a limit strap to keep it from drooping so far
Yeah I just think the limit straps are kinda tacky. They work but something about them just bugs me lol
I mean limit straps are scale since 1:1 linked wheelers and crawlers have limit straps lol
Hi man can I ask what is the cab you've got on your scx24 looks great would be appreciated thanks .
Its the AMT toyota tacoma its the one thats discontinued.
Have you tried internal springs to limit travel? I've been testing it for about a month now it has been working flawlessly.
You know they make “limiting” straps
@@OPEK. yea I've tried several of the limiting straps on the market and none of them work properly. This is the cleanest and best performing option I've found.
@@aucrc-alwaysunderconstruct2765 I USE A SIMPLE ZIP TIE IN THE CENTER. JUST TO LIMIT THE COMBINED TRAVEL. DOES NOT LIMIT FLEXED TRAVEL. THIS KEEPS MY TAIL FROM POPPING UP TOO HIGH ON DESCENTS. TRY IT, I AM SURE YOU HAVE A ZIP TIE AROUND AND TAKES NO TIME TO DO AND REMOVE
Already listed as sold out, no preorder, no backorder available. they look like a great product would have loved to try them.
I don’t think they’ve went up for sale yet but I’m not 100% sure on that. May have sold out on preorders
they sold out of the first batch but they said next batch coming soon and then plan to be able to keep them in stock
@@suchefinde Thanks, I will be checking their web daily and ordering some as soon as available.
Woow I definitely gotta try them slimballzz lol.
What link set u got on that yoda? If u don’t mind me asking
They are actually a mix of two sets. Rcaddiction high clearance rear brass link and a hot racing high clearance front link that I had sitting in the bin. They just happened to be what fit the truck decent lol. I can get measurements tomorrow if ya need those? Can’t remember what lengths they are off hand.
Do you have it 4 linked up front or are u using the wish bone piece or Y piece or whatever ppl like to call it lol
But that be cool if it’s no trouble for u. Honestly if it’s a hassle I’m not to worried about it man. I can always message u on FB later asking about them again.
Nice video man! Just got some mofo RC brass axles, such good quality and man they add some weight!
i dont feel like foams on 24th are necessary at all. they just dont have the weight to actually engage them. You demonstrated mashing them down side by side but when is that ever going to be the case without you mashing them down? totally not realistic.
Have you ran scramblers? Definitely need these! Most of the others I agree though. Not a huge deal. I’ve had them smash like that plenty of times though when you’re at a slight side hill but wedged between rocks. I’ve basically ripped tires because they’ve folded completely over in those situations. Not completely necessary but needed at times no doubt.
🤘🍻🤘