Using Amazing Mold Putty, 2 Piece Mold | Alumilite
Vložit
- čas přidán 5. 09. 2024
- How to make a 2 piece mold using Alumilite's Amazing Mold Putty. 2 piece molds are required when you have complex pieces with detail on both sides. Here is an easy way to make quick, complex molds.
For complete information on all mold making and casting applications and products, please visit any of Alumilite's informative websites:
www.alumilite.com?CZcams&Amazing_Mold_Putty_2_Piece_Mold
www.moldputty.com?CZcams&Amazing_Mold_Putty_2_Piece_Mold
www.makelure.com?CZcams&Amazing_Mold_Putty_2_Piece_Mold
www.makeholds.com?CZcams&Amazing_Mold_Putty_2_Piece_Mold
very cool, you covered everything from start to finish and showed a finished product, thank you!
If you apply ordinary baby powder to the mold interior, brush it around with a soft makeup brush, then blow off the excess before pouring the resin, you eliminate any surface bubbles, AND any missing pieces. The powder breaks the 'surface tension' that causes problems like this. Also, on small molds, it is a good idea to GENTLY squeeze the mold a bit to further release any trapped air. Lastly, use rubber bands to secure the mold halves, as this makes the squeezed the mold stay together! ;)
Amazing! Genius! Brilliant! Incredible ! Thank you so much for this video !
thank you for creating this!!
No lollygaggin'!
Thanks for this!
That was very helpful. Thank you. It was the best one I’ve seen so far.
This is incredible! If it really works like that every time, this is the best stuff ever!
Is there any way to create hollow casts? Perhaps by inserting a straw inside the mould while pouring the resin and leaving it there until the resin cures?
Thank you.
Appreciate the help :)
Very clear easy to follow. I'm not sure about the muzak though
Glad it was helpful!
Interesting video and a pretty decent tutorial, definitely looks like useful stuff. Couldn't help but notice that the arm you took the time to vent was missing, did the resin not sufficiently fill that part of the mould?
looks like a good way to make soft plastic fishing lures
Your videos are great and I'm thankful and in love with all of the casting/mold products you make. They are incredible! The process is easy, they are cost effective with quick results. It's satisfying to be able to make a mold, cast with resin (using the 10 minute resin) and in a total of 30 minutes I have an exact replica of the original piece! And I can many as I want. Thanks again!
Tarra! Thank you for your kind words! I'm glad you enjoy using our products. I think the CC in this video is what CZcams "hears" us saying, we didn't type it up ourselves.
@@AlumiliteCorporation I didn't even notice it was a public post. I rarely do reviews or any posting so I apologize. I edited the review :) making fun of UTubes closed captioning.
This is the most incredible video. Awesome!
Thank you for watching!
@@AlumiliteCorporation
Thank you for this video!👋🥰
Isabelle Victoria BC Canada
I have a wooden project with an odd-shaped insect hole. I'd like to fill the hole and use that for a mold. Once the mold is done I can cast some kind of clear resin to fill the hole. What products do you recommend?
Is there any way to make shrinking molds with this?
Could probably use clay or a gentle tie to stop the resin from coming out. Good tutorial for figurines with this tutorial thank you!
Thanks for watching!
Hello I am having trouble getting my mold not to leak. The thing i am molding is small. Could I cut balsa wood and make an air tight box and push the alumilite down and imbed the figure halfway into the putty, then create the second half of the mold as instructed? I think this would work much better in my case but what do you think?
What is the best way to fix a mold that has a thin bottom? I really love how my mold tuned out but the bottom is thin and I am afraid it will break when I use it.
Hey Mike! My local hobby store doesn't carry Alumilite White but they do have the Amazing Casting Resin.... is there any difference?
is it possible to use this to make a mold for pouring silicone?
is there an Alumilite distributor in the UK?
Yeah, it works.
I'm in the beginning. I hope you get a lot slower because I'm lost already.😂
What's the product name for the make mold ?
This is our Amazing Mold Putty to make the mold and Amazing Casting Resin for the end replica.
@@AlumiliteCorporation Amazing, Could I have your email, if I would like it more information concerning your product, please. Thanks
@@tsujono Absolutely! Email us at info@alumilite.com, we're happy to help.
@Kane856
Here is a link to Alumilite's site which has our "Dealers" listed on the Dealers page in the top menu bar.
We also have another one called Metal Clay ... the contact there is Candy. The number we have for them is: 441-929-481541 and email is: candy@metalclay.co.uk
Hope this helps.
Mike
how can I prevent leaks ? im trying to make a 2 piece mold of my action figure head and sometimes it will leak. I have tried hot glue and that tears away easily
I don't use amazing mold resin
It the mold re-usable?
Tom, the cured product is a flexible silicone mold that you can get multiple castings out of. The mold cannot be recycled into a new mold if that is what you are asking. Thank you.
AlumiliteCorporation That was the answer I was looking for thanks. I want to use the molds to make multiple copies of various subjects ( 1/35 soldiers).
Tom Tate fuck? you really asked that?
G on a mission You have some mighty big keyboard muscles there shitbait. You should consider real consequences when you taunt people.
tmont007 what you will say something derogatory on one of my other posts :-(, PLEEEASE DONT! Because as god is my witness ill strike back with grat vengance and furious anger! with a comment suggesting your comment was a bit lame!....IM SERIOUS
It hardens as I mixed it and was unusable
That's really strange! It sounds like you may have gotten a bad batch - reach out to our customer service team at info@alumilite.com and they should be able to help you out!
Where can I buy this product here in Brazil?
is it me or your missing left sleeve and looks like a hat is on head
Good catch, it looks like we are missing a sleeve in the casting. Not sure what happened there, but thanks for letting us know!
Lol im new just bought kit so watching videos helpful .
@@aquaboygarth Awesome, thanks for giving our product a try!
well thare i dont do candy i do war gaing whot is the nuber for the USA fore this produck liie get lot to mack some bits for my own ues yes GW stuf this looks not that difecult well it works like clay saw the other vids and vakumes are not going to happen clay good vak bad LOL
@redgreen09 Tip: get a dictionary man
or go back to kindergarten and learn grammer