AUTEL IM608 PRO 2004-2007 CARAVAN READ PIN (EEPROM)
Vložit
- čas přidán 26. 12. 2021
- MUSIC:
SILICONE ESTATE-DREAMING
DONATIONS/DONACIÓNES
Cashapp: $paymemoneymike
Paypal: paypal.me/mike90f?locale.x=en_US
JOIN OUR MEMBERS CLUB
/ @mykeysautomotive
PERKS:
COMMENT REPLIES,GIVEAWAYS, MEMBERS ONLY COMMUNITY IMAGES & POST. EMOJIS & BADGES!
Thank you all for supporting our channel from day 1 ! We have really came a long way from where we started! We strive to give you the best information with the best content you can find on youtube!
If you want to keep supporting our channel
You can always donate to our channel! - Auta a dopravní prostředky
If u desolder the opposite points of the connector the two pins the whole pcb is able to be removed that way u don’t damage the housing
Anthony thank you for sharing!! Your advice is really much appreciated!!
I have seen a lot of people do it this way. I've even seen it done with a dremel with a milling bit. I have a Hakko FR-301 and just desolder the antenna pins. I don't think there's any wrong way to do it, but in my opinion it's just faster to remove the board if you have the equipment to do it efficiently.
Where are you talking about? Which two pins?
@@pouncerminned863 if u open up the casing there are 2 solder points at the bottom that’s wut holds the circuit board on the plastic
@@335135 are they blobs or just two small pins? I’m looking now and can’t see them lol I see so many things
Makes friends with your local dealers, folks! While you won't be successful with all of them, establishing a relationship with the parts department can go a long way. I have a contact at my local Dodge/Jeep/Chrysler dealer and with a 2 minute phone call I've got my pin/key code. Great video. Very informative.
Yes sir i agree 100 percent!! Couldnt have said it better myself!
Will this device and reader compensate me for the Tango device and does the VW group work All keys are missing
You’re good at this stuff and fast! Gonna start focusing a lil more attn in my eeprom skills and soldering. Thanks for these tips!
Yess sir! Thank you for watching! Glad you liked it!
Never seen this done before, thanks for this video. Happy new Year, cheers
Thank you glad you
Liked it! Happy new year!
Professor you are the best.Thank you for sharing your knowledge 👏
Thank you brother im glad you liked it!!
Hey man been watching all your videos and I can confidently say that you know what you're doing. Much love from here I just love the way you do your thing and most of all you're versatile with all your programming tools. I'm a junior locksmith your vids have been helping me a couple of times and I say thank you for being there for me. All I have a ck100+ and techstream (the Chinese copy) I wish I could come to your workshop and get tutored personally. Much love from here.🥰🥰
Thank you brother for the support! God bless you!!
Привет! У меня есть Autel608! Как его можно обновить?
@@MYKEYSAUTOMOTIVE I appreciate you so much. I don't know, do you have any key programmer especially one that can do proximity keys that you don't really need anymore. It'll help me alot. That's if you'd like to gift it to me. 🥺🙏. Would really appreciate. It'll go a long way for me.
Thanks for sharing this great video Mike. You’re the best. Most people are very secretive on what they show. Thanks again happy holidays big mike
Thank you brother happy new year and blessings to you and your family!!🎄🎁🎁
@Carlos Juan Not going to spam the link but check my playlists, I have one for a 01 mazda mpv.
Awesome, Love the Autel IM608😍
Great work Bro, Thanks for sharing👍
Stay Safe👍
Thank you brother gld you liked it!! God bless you
crazy awesome video. good job the 608 is revolutionary.
Matt thank you brother! I coudnt have done it without you!!
Awesome video! Thank you for sharing this!
Thank you brother glad u liked it!!
esa estaba esperando de tu parte gracias
Amigo disculpa !! Bendiciones y gracias por el apoyo!
Muchas gracias por este buen video👍🏻👍🏻👍🏻
Gracias a ti amigo bendiciones!!
Great work, but I recommend a small dreamel with bit to make a access area that your able to put back and plastic weld it up that was shes air tight again
WOW Wow wow!! Thank you so much for sharing this very important information, I really appreciate, God bless you Mike.
Love the videos. Happy new year
Thank you brother happy new year God bless you!!🙏🏼🙏🏼🙏🏼🎄🎁🎁
All your videos are great thanks
Thank you appreciate the support!!
Great Video....awesome content!!!! I prefer the cable method vs removing the chip from the board 👍
Totally agree!! Thank you brother!!
I recommend using flux and solder paste in the future when resoldering.
Will do!
Dope stuff brother🤙🏼🤙🏼
I came across one of these vans a few months back and I couldn't get the pin because I didn't have my xp400 with me
Yes its not possible without the xp400 !! It does a great job when it comes down to bench work! I usually just order the key code from magickeycode.com.. in some occasions when they change ecu u might have to be careful because i believe the have different vins and they might send you wrong code .. so just always ask questions before ordering any key code or pin!
well done............thank you💐🌸💮🏵🌹🌺🌻🌼🌷
We don't just love your totorial videos,
we also love you Mike.
GOD bless.
Dashty thank you brother!🙏🏼
Greatt videos as always Mike
Thank you Mark God bless you!!
Tu eres un duro papa
🙏🏼🙏🏼🙏🏼🙏🏼❤️❤️❤️
Followed same instructions for a Town & Country ST95080 and after saving the IM508 displayed "Reading password is not supported by the system".
SW version DODGE V4.40 any idea what the deal is? As a side note, I read the 95080 on another bench top eeprom tool and was able to get the pin.
Only reads it once ..
How often do you read the eeproms in situ on the curcuit board?
I always hear it's a bit hit and miss and it's better to desolder it which i see you do also?
What's been your experience of success reading them in-situ?Thanks.
50/50 i mostly order the pin from magickeycode.com
Exelente
Ramiro thnk you brother!!
Saludos 🫂 gracias
hey Mike..so even if you have an existing key, you won't be able to retrieve PIN code by OBD with the 508/608?? If you just clone the transponder, Is there an on board programming for the remote part? Or do you also need the PIN for that?
I havnt really tried with the 608 tbh honest but i do know you can clone without remote part.. thats the bad things about these i really doubt u can read with the im608. You can also order the pin code from magickeycode.com
Thanks
Thank you Alan!
Dremal tool works good to but a hole into the box
Thank you for the tip!
What if i read and saved and it says the password reading is unsupported by the system ?
Hola amigo hice paso a paso pero no me dio lectura.
Lo hice por lectura directa de eeprom y éxitoso, luego pase otra vez a immo y volví a hacer lectura y me dio el código.
Gracias por tus tutoriales, me ayudan bastante
Nice work
Thank you sir!
Nevermind that’s fobik, this is blade.
Impressive how much you know and share thanks. this the apa103 clip.
Thank you brother!!
@@MYKEYSAUTOMOTIVE just join
Have you ever lost all the data using clip? I had this happens on vw cc 2011 comfort module
If I got this module from the junkyard and pull the pin code will I be able to install on a different vehicle and program new keys since this module fails a lot on Chrysler dodge jeep
I believe you have to sync it to the vehicle first and you might need to reflash .. ive done it with newer model fobiks but im not 100 percent of this would work! I will look more into it for you! Thank you!
damn mikey you need to give classes so we could learn all this high tech things i would love to learn this type of work but i am affriad to do something like that with out any knowledge
hello thank you brother im having classes at the moment over here in caifornia! thank you for all the support hope all is well with you my brother ! God bless you🙏🏼🙏🏼🙏🏼
Hello, I have a question, could you get the same pin code from the engine ecu? Thank you
Hey bro como estas una pregunta es el mismo proceso para ram y chrysle 300 del mismo año
Is there a difference in capabilities between the 508 and 608 when paired w the xp400 or is it the dame capabilities minus the diagnostics.
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Question how did you learn I been looking for schools here local but nothing thank you !
Another super video! Quick question - why didn't you read while the EEPROM was in the SOIC adapter instead of reinstalling the EEPROM and using the clip?
I showed it just as an example but you can chose which way is better for you..
Will a 2015 Chrysler 200 key fob work on a 2020 challenger they have the same fccid but I don’t see them listed on the compatibility
Yes they are compatible!! They do have same fcc!! M3N40821302
www.uhs-hardware.com/products/2019-2021-dodge-challenger-charger-5-button-smart-key-pn-68394195-aa-m3m-40821302
@@MYKEYSAUTOMOTIVE ok thanks I was just wondering
@@335135 no problem thank you member!!
Awesome video mike, do you happen to know where to find that pin located in the bins? Which bin it’s in. I have seen a video that noted where it was but can’t seem to find it.
I will go through it later on see if i can find it.. the autel as you can see automatically finds it for you!
@@MYKEYSAUTOMOTIVE yeah I don’t have the Autel yet. Just using the pro pad and the the xtool to do all my eeprrom reading and re flashes. But that’s a lot. No rush of course. But maybe next time you read one just look at the pin and then see where it pops up in the file.
Tengo un im508 mi pregunta es como puedo saber si la lectura es correcta de la eeprom ya que he leido de vw y lo vuelvo a leer y meda diferentes hexadecimales , principalmente al pinzar
hola👋🏽 saludos amigo! para comentar con prioridad, ¡únase a nuestro grupo exclusivo para miembros! desde una computadora de escritorio o portátil al lado del botón de suscripción, verá el botón para unirse. ¡gracias! 🙏🏼🙏🏼❤️❤️
Good Video! Supposedly the Autopropad will do this job if you have the EEPROM adapter. What tool are you using to melt the solder? Is it blowing hot air? I guess the SKREEM module is located on the steering column. I think you can also use the tool for welding plastic to melt the SKREEM case.
Hot air rework station is the tool he is using basically a small orfice heat gun make for small electronics We use Hakko Soldering irons and rework stations
Thank you brother!!🙏🏼🙏🏼❤️❤️❤️
What is Eeprom and in what situation is this needed?
mikey what is the best way to learn this type of work should i go to a junk yard to get these things please you are a super professional you should give us classes but in person i would love to pay for you to tech me and other professionals please think about it please to give classes i am super sure theres other willing to learn
yes that is ideal go to the junk and remove a few modules and door locks and practice eeprom and lishi skills .. also ebay sells alot of these modules so u dont have to go to the junk and remove them yourself
Great video can you share the links where to buy that adapter and soldering gun ?
www.ebay.com/itm/313397662872?hash=item48f7f4d498:g:57UAAOSwS-FgEhGx the adapter came with my programmer
Hi sir how can I know if the car programed by OBD or I must take the immobilize and read the chip
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
👏👏👏
🙏🏼🙏🏼❤️❤️
Are you possibly showing 2 different ways of accessing the Data from the Chip? (Maybe method 1 is removing the Chip and using the Socket Adaptor, and possibly Soldering the Original Chip back in to use the Clamp for method 2?) The way the short Video plays out, seems like you pulled the Original out and added another. I ask because I am a (Close to 30 year Mechanic) that actually went to a Technical College learning Computer Repair on a Component Level before they became Microscopic. I am Fluent with Automotive Repair and Advanced Diagnostics. I have multiple Versions of Diagnostic Scanners, and a couple versions of O-Scopes i use quite a bit. I am tired of turning away work that has to do with Keys. I have an Autel IM508 coming, and am trying to research and learn while waiting.
Dremel w\ cutting disc works much better.
Thank you i agree
Lo haces ver tan fácil...!
Jajja es facil amigo!! Con practica todo es facil!
dremel w/ cut off wheel takes 45 sec
where can buy socket xta001 please what it is correct to buy it
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Very nice, I prefer to just buy a code though.. way easier and way less time.
Whatever works for you better!!🙏🏼🙏🏼❤️❤️
Can Autel IM608 Pro read and write EEPROM from instrument clusters?
Yea
I’m pretty sure you can’t clone Pacifica system key. Pin code requires even if it’s just ad a key.
I have its a 4d60 I believe
Why did you select general option? Just curious
Its the best matching option the rest dont match up..! And it worked for me..
Es todo Mikey. #membersolnygiveaway
🙏🏼🙏🏼🙏🏼🙏🏼❤️❤️thank you brother!!
Gracia por el video, donde esta el modulo y como lo remueves, thank you
Hola Marco para commentarios de prioridad porfavor unete al club de nuestro miembros! Gracias!
A question about this procedure,,, why would you go thru all that if the dealer can provide the pin-code for free or sometimes dealer will charge $20 for a pin-code... seems like too much work,,,,, unless the vehicle is not available and you are doing the job on the bench.... I think it's always better to try to avoid eeprom reading, and try to do the job the way oem/factory does it.... unless you're limited on tools, and you only have an eeprom reader,,,, TRY TO MAKE THE JOB AS SIMPLE AS POSSIBLE,,,
I did this video for my viewers this is what they want to see... and i agree about ordering the pin anyone with brains could see that its longer for you to extract pin via eeprom 😂 lol
Yeah, too much heat from the hot air gun and the 8 leg Eeprom is cooked "forever" or 1 nice shot of static electricity scrambles the Eeprom data. Very difficult finding replacement Skreem modules and syncing em to the vehicle. Alot of gamble for little reward.
Plan B, you can always send the owner of the vehicle to get the pin at the dealership. plus always offer a discount if they provide you the pin.
Yes sir!! That is always recommended but sometimes the dealers has it bad days and they are mean and just brush us off!! :((
@@MYKEYSAUTOMOTIVE
Or some times the system is down.
That’s when we come in.
Mike
Si se compra el Pin code & key code Viene juntos por $48 dlls
Se pueden hacer las llaves vía OBD ?
Add a key or AKL ?
Gracias
Si amigo asi es ! Te mandan el corte y el pin! Nomas asegurate que no le han cambiado ecu or la antenna!
@@MYKEYSAUTOMOTIVE thanks
so if u get pin from a 3rd party I can skip all of this and program via obd with my programmers
Hello Friend!👋🏽👋🏽Please join our members only group for priority commenting! You can join From a desktop or laptop next to the subscribe button you will see the subscribe button! Thank you!!❤️❤️🙏🏼🙏🏼
Great video, what do you do when it says password reading is not supported?
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Love the RUSSIAN 🤗Amigo)
Thank you my friend!!🙏🏼❤️❤️
Translet in France
ça ira
Молодец
🙏🏼🙏🏼🙏🏼❤️❤️❤️
Que tal.. Sigo tus videos... Los entiendo un poco.. Me gustaría.. Partes en idioma español... Gracias
Gracias amigo bendiciones!!
Guys this is way too much time and work call the local Chrysler dealership.i do enough business with mine that I don't get charged for the pin code
Agreeable. Some dealers arnt so nice .. i guess you have to take them a box of doughnuts lol 😂
What do you get for the $500.00 a month membership? Love your videos!
Well I usually give out my business number ..I go one on one and consult you on machinery ,and you can call me everyday for a few minutes for advice or tech support
No se puede por obd2 con 3l xtool
Hola saludos amigo! 👋🏽 para comentar con prioridad, ¡únete a nuestro club solo para miembros! ¡¡Gracias!!🙏🏼❤️
U real....? went for melting through the casing when all you had to do was using a Dremel cut a square out. :)
😅😅😅😅desperate times calls for desperate measures
@@MYKEYSAUTOMOTIVE should next time use NAPALM and 3 mins in the microwave
An alternative plan could have been to have swallowed the thing and waited for digestion to run its course, so pooping out the pcb board after?
Come on man, I don’t understand why the auto companies have to make it so hard on the techs
Me either!😢
Lo asen para complicarles la existencia
Would I be wasting money buying this and 2500 buck keying machine if I’m going to become a mobile automotive locksmith
I seen a whole bunch of cheaper stuff but I don’t want to miss out on anything
yes if you charge cheap for your services. Charge cheap and you'll lose
I would start with something less complicated like the autopropad to start off with
Use a dremel
Thanks for the tip
@@MYKEYSAUTOMOTIVE 👍👍
It is much easier to just remove the whole pcp out of case I never cut into them it's to messy and doesn't demolish the case.
Hello greetings please join our members club for priority commenting!! Thank you! ❤️🙏🏼
Can you make a video of that? I couldn't disassemble it.
@@MrLuwitin the pcb is only connect to two points just use a soldering wick or suction tool to remove the solder and then the board can be popped up out the case.
@@MrLuwitin The antenna ring pins are the only points that are soldered through the pcb board. First remove the solder in combination with a suction tool and copper wick, then pry up the board after your can freely move the pins around in their holes only.
why you don't speak in Spanish as always?
😢😢😢im sorry
Bro you don’t need to eeprom the caravan! You could have just read the pin via obd! I really hope you knew that and the customers obd was broken! You lied in the beginning the autel will pull the pin on a caravan. No eeprom is needed. You can 10000000% obd that!
Since when unless there is some new update ur wrong
@@segounlocks5029 Yes, i wanna know this too
na i just did one of these and you need the password, autel im608 doesn't pull it
@@pouncerminned863 exactly he's just assuming because he's obviously new to this and hasn't done 04 to 07 vans.
@@segounlocks5029 yea. I’m having issue right now. The original skreem I can’t read the chip- tried using the clip and desoldering and putting on the adapter but getting error about bin file version error- so I bought another dkreem module and I can read the pin. But what options do I have? I have xp400 im508. Can I program module with original vin and pin? I ended up buying the pin from original pin- the original dkreem module antenna is danaged
good 👍 thank you brother, please can i get your contact
Lilroxx001@yahoo.com