Thank you for making this video and including PIP video of yourself during the process, helped a lot! Your tune looks rock solid. All the best for the competition :)
Just messing around with the EQ files from REW. I could be wrong but what I found was when importing the EQ file to the helix, with tone control turned OFF (just to see what is actually happening because tone control blacks out the data on the second band) the helix will take whatever your EQ file has and line it up left to right starting at the first band no matter what. So instead of putting NONE in place of PK on filter 2, I copied and pasted filter 2 like you did to the next available filter (in your case it was filter 15 for left tweet) but KEPT filter 2 in place and changed the DB to 0. This way you do not lose the third filter in your eq file to the Tone Control Black Hole in band #2, basically just adds a dummy filter at 0 db. If you notice when you loaded your modified eq file into the helix, the EQ filter #3 (1K1) disappeared into the black hole. You can also do this with the filter #1, so you don't lose your low shelf filter. Not sure if you have already figured this out but if not, hope it helps.
At the start when you start target curves, what software are you using to make that? It looks similar to REW, but how do you see that? Also, how did you work out that at 30hz you need +8db? Because that's what I currently but for my home theater.
The program I use for individual targets is called "Jazzi's tuning companion" and it's an excel sheet that you can find in DIYMA forum to download. The +8dB target was just a guess and it was a wrong one. You need more bass for Emma, something like +12-15dB.
This may be a dumb question, but you ran pink noise at the beginning with no crossovers except on your tweeters. Why does this not risk blowing your mids and mid bass from playing lower frequencies? I am in the process of learning advanced tuning and love your channel.
At a low enough volume and especially pink noise speakers can play full range with no issues. You really can only damage speakers with test tones at high levels.
with all due respect because you are the one putting all the hard (very good) work, but how come you decided not to use the Virtual Processing advantages of such a powerfull DSP allows? Why you prefered the to do the EQ directly to the Main outputs? Thanks
Hey mate, when you select the Frequency range in the EQ in REW how far above and below the xover frequency do you extend, I've been playing around all day and I keep getting -12db filters at 0.5-1 Q
Thanks, I just found another one of your videos that explains it. I'm running a AFM12.14 but the filters that are being generated are cutting way too much, I'm using generic EQ with Classic Q but I might have to try different settings because I'm getting lots of -12db filters
@RAW-CAt yes ,thank you.. I find it. I also check your method of adjust delays. Thank you a lot for big work. I also do videos now how to set all by microphone perfect. Without "by ears"words
Hi sir is that ok to charging the battery while you listing music in your car ? Because I’m in very big confused about the mythes what you should or not because other wise you cannot take so many measurements and than you have to start the again and keep doing it
@@RAW-CAt thanks sir is was big hassle to start the car during tuning some time i had drain my battery almost to 10 and than its take so long to revive but thank God you i seen that part of your video always should watch every single bit of video you never know what you gonna find lol great work sir God bless you
Hey, as always awesome content. I almost watched every video, trying to learn as much as possible. Is it possible to send the EMMA Tracks? When I try to get them in the store it denies my payment and wants an adress etc.
Hello, Why Do you need modify the EQ file. You copy second one filter and paste end of to filter. And you are makine second one "none"? Why? I wonder that it.. Thanks a lot..
Thank you for making this video and including PIP video of yourself during the process, helped a lot! Your tune looks rock solid. All the best for the competition :)
Excellent video, you are a great instructor! Why are you concerned about correcting frequencies that are greater than 20db below your target level?
Just because why not🤷 You can decide for yourself how far you want to go with this. I am not limited by EQ bands, so I go all the way.
That was fun.
Thanks for sharing!
Just messing around with the EQ files from REW. I could be wrong but what I found was when importing the EQ file to the helix, with tone control turned OFF (just to see what is actually happening because tone control blacks out the data on the second band) the helix will take whatever your EQ file has and line it up left to right starting at the first band no matter what. So instead of putting NONE in place of PK on filter 2, I copied and pasted filter 2 like you did to the next available filter (in your case it was filter 15 for left tweet) but KEPT filter 2 in place and changed the DB to 0. This way you do not lose the third filter in your eq file to the Tone Control Black Hole in band #2, basically just adds a dummy filter at 0 db. If you notice when you loaded your modified eq file into the helix, the EQ filter #3 (1K1) disappeared into the black hole. You can also do this with the filter #1, so you don't lose your low shelf filter. Not sure if you have already figured this out but if not, hope it helps.
This sounds important lol
Why do you guys block out that 2nd band again I couldn’t make out what function replaces/requires it exactly ?
@@onesikm3 tone control
Terimakasih salam kenal..channel ini selalu berisikan konten yang sangat membantu dan dengan penjelasan yang ringan dan simpel 👍👍👍
At the start when you start target curves, what software are you using to make that? It looks similar to REW, but how do you see that? Also, how did you work out that at 30hz you need +8db? Because that's what I currently but for my home theater.
The program I use for individual targets is called "Jazzi's tuning companion" and it's an excel sheet that you can find in DIYMA forum to download. The +8dB target was just a guess and it was a wrong one. You need more bass for Emma, something like +12-15dB.
Thsnk you.@@RAW-CAt
Awesome. Thanks
This may be a dumb question, but you ran pink noise at the beginning with no crossovers except on your tweeters. Why does this not risk blowing your mids and mid bass from playing lower frequencies? I am in the process of learning advanced tuning and love your channel.
At a low enough volume and especially pink noise speakers can play full range with no issues. You really can only damage speakers with test tones at high levels.
@@RAW-CAt Well noted, thank you for replying.
I have tried that moving mic process but I don’t find it very accurate!
Accurate in what way? Any measurement is just an approximation of how we hear. That is why final adjustments by ear are necessary.
I have AUDYSSEY microphone, May I use it instead of Umik microphone?
Many thanks…
Unles it has a calibration file.
@@RAW-CAt What about DAYTONAUDIO iMM-6 ?
@@Ac-cj8pe that one will be perfect 👍
with all due respect because you are the one putting all the hard (very good) work, but how come you decided not to use the Virtual Processing advantages of such a powerfull DSP allows? Why you prefered the to do the EQ directly to the Main outputs? Thanks
In these videos I am Using an older MK2 processor that does not have any of the advanced features.
Hey mate, when you select the Frequency range in the EQ in REW how far above and below the xover frequency do you extend, I've been playing around all day and I keep getting -12db filters at 0.5-1 Q
A full octave above and below Xover.
Thanks, I just found another one of your videos that explains it.
I'm running a AFM12.14 but the filters that are being generated are cutting way too much, I'm using generic EQ with Classic Q but I might have to try different settings because I'm getting lots of -12db filters
Hello Bro, can you give me your nice Excel file from begin of video? i don't have skills to make it by myself, thanks a lot in advance
That excel sheet is called "Jazzi's tuning companion" and you can find it on diyma free to download. Just google and it will pop up.
@RAW-CAt yes ,thank you.. I find it. I also check your method of adjust delays. Thank you a lot for big work. I also do videos now how to set all by microphone perfect. Without "by ears"words
Hi sir is that ok to charging the battery while you listing music in your car ? Because I’m in very big confused about the mythes what you should or not because other wise you cannot take so many measurements and than you have to start the again and keep doing it
Charging the battery with a charger is the same as runing the engine yes, you can to it
@@RAW-CAt thanks sir is was big hassle to start the car during tuning some time i had drain my battery almost to 10 and than its take so long to revive but thank God you i seen that part of your video always should watch every single bit of video you never know what you gonna find lol great work sir God bless you
Hey, as always awesome content. I almost watched every video, trying to learn as much as possible.
Is it possible to send the EMMA Tracks? When I try to get them in the store it denies my payment and wants an adress etc.
Can you DM me on Messenger?
@@RAW-CAt Yes of course, how can I find you?
@@IPsyChARTz nerijus kochanskas on FB.
I 'm thinking the weird result on the IB sub is the grill rattling.
It was a mic issue. Unpligged it, plugged back in and all is good👍
Hello, Why Do you need modify the EQ file. You copy second one filter and paste end of to filter. And you are makine second one "none"? Why? I wonder that it.. Thanks a lot..
Because whatever you are importing into helix, it overwrites the old values
Amigo que tal ? Cómo podría conseguir ese archivo que muestras al principio dónde muestras los valores de la curva objetivo
It's called "Jazzi's tuning companion" just Google for it and you will find it.
do you eq everything up before time alignment or after ?
Before.
Mid bass and subwoofer target level same or different
Different. They have a similar response though.
@@RAW-CAt you are not showing mid bass and subwoofer
What about Q i don'n know how this work pls explain
YOU SHOULD INSTALL QUIT TIRES FOR BETTER SOUND...