Video

My mans said Tiger it’s Tyga lmao like a Tiger 🐅 but with out the er just a Ty GA lmao

I see you don't have any low level "random computer buzzing" type noise which does not increase with the volume control. This is when I connect my old Kenwood amp to speaker or RCA outputs, with resistive voltage dividers. Yes I am a technician! I suspect I have noise from the car electronics being superimposed onto the head unit supply. Good to see that not all these head units do this! Fantastic video, very clearly presented.

Finally someone techical to evaluate the Atoto

My question is my mom has a ford fusion with 2 6x9 factory subs in the rear deck and it has really loud decent sounding bass, I tried the the same with my car and the bass is lacking, do I need to seal off the trunk for it to work properly

Are the Linaeum tweeters considered electrostatic? I still have my Optimus Pro LX-7 speakers that I purchased in 1996 and they have the monopole Linaeum tweeters. I still prefer them over the Sony SS-CX5 speakers.

This is cool how you talk about freq loading and also how waves take time to expand.

This scares me, I have dual 8w7 that are going in my pickup in a sealed box underseat. If the cabin causes it to loose energy at those low frequencies I might be forced to go ported with low tuning.

When you are finish with the individual channels do you do an EQ with all of the drivers on with the pink noise playing.

This was both fun and informative, thanks for your help!

Idk you didn't test without subsonifilter off? Look like a real mess with that low end dip at 20hz. This video looks like troubleshooting and issues no concrete results.

I have a 2017 Canyon Extended Cab and it is a pain to get loud low. I sold my VXF setup and am running a cheap setup while I finish my new enclosure, just finished doing the electrical. My current box is supposed to be tuned at 36hz, 2 cube, single 12" SVR I have heard the resonant frequency is around 41hz and I do get a big jump around 42 but continues too get louder until about 49hz, I cut it off at around 70-80hz. It will get to 30hz with the windows down but it is noticeably quieter and 29hz is just too quiet for music. I plan on putting a 5k amp in and was leaning towards a single 15 or maybe a pair of 12s and tune in the 28-32hz range but think I will probably waste most of my power fighting the small cab. I have had so many people swearing I need to stick with 8s or 10s lately but I just feel like the 15 is the better route even if i tune a bit high than I like to take advantage of the acoustics.

The only thing I do not like about having small subwoofers is that they have to move a lot to compensate like a bigger one and that extra movement leads to more harmonic distortion and danger of ripping soft parts. Unless you use a whole bunch of the small ones together but that sure is a lot of magnet weight in comparison to only one big subwoofer and magnet that’s for sure. My dream Subwoofer is a rectangular 15” x 30”.

I didn't click Justin's video when it came out because I assumed it was "clickbait". I know he tries and he is very honest about his testing methods, but he also knows the best way to get clicks without needing too much content. I will continue to use the largest subwoofer(s) I can fit in my vehicle taking into account compromises with the space I am willing to give up. I'm glad the industry offers a variety of options but as of today I have seen no need to step down to a 6.5".

Pls make a video that : How to take measurements.. With wrong measurements, all effects will go in drain

Yes the crossover we didnt know we needed

Just admit the measurements are not done right 😂. Its got nothing to do with the car to a very large degree and most cars and or vans start to load from 80hz and generally flattens out. Thats why brands use High Q nonsense.. Justin something is wrong with your setup in Rew and the mic or you have a filter on the dsp. You can load a 4" or a single 6 inch and get a better looking graph, take care.

Thank you for the amazing walkthrough! I clicked that subscribe button =D

PorshEEE not porsh

Nigerus (raw-cat) done brought the public knowledge to a whole level where a average knowledge guy like myself doesn't have to be lost or guess to I feel it is right but still don't really know. Alot of top guys give you little bits and breadcrumbs even though someone taught them and you still chase the dream of your hard earned equipment is playing the best you made it and you getting the real listening enjoyment you expected or come close. I blame manufacturers putting out products like dsp, dsp amps and vehicle integration stuff and have nothing uploaded at the time of purchase of installation, tips and why and what the products should be doing at the moment of install and have a video showing what dsp and vehicle integration equipment is not doing when you install wrong like when using their gizmos when installing a radio and the steering wheel controls not working. Where to grab the power wires when the integration stuff needs key or constant 12v, lil stuff like that goes a super duper long way. I got navtv stuff in my srx cadillac and supposed to mirror my android for my apps and play videos when I'm ready but nothing pops up. No fuses blown I feel I followed directions but it is always a sketchy part in the directions when it comes to integration equipment. Spent big money on the zapco dsp but for some reason the spdif input is not putting out sound and you can't get in touch with no one who knows anything, you would think zapco would have tech team videos up showing the installation and use of their products and not just them all the big boys in the game instead of showing a cool install and saying go buy it cause it enhances your system. I dig just as good in simpler times with a in dash eq from back in the day that is a dam shame

I love seeing this, watch you both and thought about you when he posted this video

I used to think only big drivers could give lower, deeper bass until I put three 6.5”s in my truck in around .5 ft3 per, tuned to 31ish Hz…back massager👌🏽😊

My one sound ib3 15 🎉❤

Yes positioning is a pandoras box . The best is to give distance to gove more distance (wave length) to start working! But also to set them in the middle is a cancellation party! Because if somehow a frequency gets cancellation that is on twice (left and right)

I have the planar magnetic in a 3d printed wave guide as a super tweeter. I am really interested in the tweeter test comparison video as I enjoy listening to them in this role.

What is your take on sq subwoofers being mostly 10"? There are different opinions on this, but most conclude being more precise and overall better "sq" than bigger ones. I have been wondering if this is really the case because subwoofer technology have come long way even from 15-20 years ago, but most manufacturers who sell sq specific drivers still stick to 10".

so it's a good thing that I have a 15'' lol :))

very interesting!

Great Collaboration, you both produce excellent content.

Would be interesting to see a video comparing multiple smaller drivers to a single bigger driver? I.e 2x 19" vs 1x 12", or anything with similar total cone areas

Thanks for the info

Well explained!

Horror.

Ive seen where people makes a replica pillar from resin amd fiber glass and then use that to build on and wrap it woth the oem material instead of risking it on OE pillar.

nice video, i knew the vifa/peerless would do well, i have used them in several projects with great results, they work really well in a 3way, if you want to cross over lower they make a 25mm version NE25VTS. They have some other models that are larger that do exceptionally well, their midbass drivers are also really good but not always ideal for automotive (not in doors) and they are typically non coated wood pulp/paper. if you want to go up a level and money isnt a barrier have a look into the scan speak revelator and illiminator lines they are really high end but performance matches. the ScanSpeak Illuminator D3004/6600 AirCirc are pretty exceptional they do all the airy sparkle stuff but are listen to all day non fatiguing, the D3004/6020 & D2004/6020 are physically smaller and would do better physically in an automotive setup with limited space.

Hey guys I have a question. I have noticed that my subwoofer in the back blends in very good in thw front seats but in the backseats it is out of phase with the midbass and is also too loud do you know a way where my sub is also in phase with the backseats ?

Are these ment to play down to meet the subwoofer at something like 80 Hz? Will they ever play that low? Modeling a closed box it gives a 2 sqft box and a -3 db of 102 Hz.

when talking about xmax and bottoming out, going past xmax (linear excursion) wont make it bottom out, but reaching xmech (mechanical excursion) will make it bottom out.

Boss check the manual about 96k and windows ❤ mac users no problem up at that resolution. Also for considering measure all at at 1 watt or 2.83Volts, many of those measurements will reflect characteristics in distortion. Level it out in Rew on the graph, peace bro.

most annoying thing... dude... for you must be not being a lefty ! how the heck do you drive and control the unit ?

I have 3.5" infinity 2 way coaxials in my dash, and stock bose 6.5" midbass drivers in my door. The bose drivers have the VC on the reverse side just like the ones you have here. My DSP isnt 100% dialed in yet but still sounds pretty damn good so far. I think I need to angle my dash speakers a bit so theyre not firing direct at the windshield.

Put a 2 ohm resistor in series with woofer. You should plainly see the overshoot and ringing increase

The cone always has overshoot. The lower the damping factor the less the overshoot. Likewise the cabinet can cause overshoot as well. If you have a low DF ina freely ported woofer it will overshoot and ring.

Thank you for making this tutorial!

So what’s a good amp for kids and tweets?

So if you were to replace the Tweeter & 3" mid-range... and keep the C6 Woofer... what would you use instead?

I looked everywhere, can’t find NE19 TS-04…. Has anyone found anywhere that still sells them? Thanks.

AMTs taking a beating in the toddler's room shootout.

You must have a solid Mrs!!! I love how you just set your laboratory up where u need to! Amazing information and effort on the videos. Priceless!

I like TURTLES!

Which model exactly is this Kicker Tweeter ? Which size ?