The EASY way - How to Wire UTV Accessories
Vložit
- čas přidán 13. 06. 2020
- Are you looking for the easiest way to wire up accessories to your UTV or SxS? Do you want to be able to easily add new accessories any time? We think we may have found the perfect budget option. In this video, Joe will run you through the process of getting you machine set up with the 8 gang switch set up commonly found on Amazon. He'll take you along as he adds Lighted LED Whips and Rock lights as well.
Links to Products in the Video are below.
Ways to support our channel:
Buy parts from Rocky Mountain ATV MC: tinyurl.com/derangedrockymoun...
Subscribe
By parts, accessories, and apparel at: derangedoffroad.com/
Become a patreon supporter: / derangedoffroad
Connect with us on Facebook: / derangedoffroad1
Camera Gear:
Go Pro Hero 7 Black: amzn.to/2yv34PC
DJI Osmo Action: amzn.to/2RWJt1y
Links to Products in the Video:
8 Gang Switch Panel: amzn.to/2Yv49QM
Rhino Lighted Whips: derangedoffroad.com/collectio...
R1 Industries Rock Lights: email for info
HSP Seats: derangedoffroad.com/collectio... - Auta a dopravní prostředky
I’ve been eyeing that switch pack, perfect timing!
I just added a 6 gang switch setup similar to the one you are working with.
Very clean install! I saw the “DUNE YXZ” behind you! Thanks bro!
😉 Thanks for your support brother! -Joe
Deranged Off-Road 👍
great video! just ordered your talon emblem for the tractor supply box last week and stumbled onto this did toy have to modify or use anything else to mount the switches above your rear view?
Hey when you’re hooking up the fuse box, did you connect the positive post of fuse box to the accessory wire or directly to battery
Do you adding a circuit breaker for the positive wire before the battery?
What size breaker was that? Thanks
Are you offering the mounting plate for sale?
Is the control panel water proof or at least water resistant?
Um connections?? How did you wire to rocker panel like actually
Was briefly looking at the links you put in description. Did not see any info on the switch plate and fuse box. Wondering if those parts would still work on a 2023 model. Do you have part numbers on those items?
Nice install, I didn’t hear or missed it, the mounting plate did you make that and if so what did you use. Thanks for the videos.
wes wynn he made it told someone else in the comments
Thanks for the info. Where can I get everything you had? Switch panel, breaker, bus bar. Looked like a really clean setup.
All the links to everything are in the video description. Thanks for watching!
I love the switch plate and followed your instructions to install it in my 2021 Talon. I recently bought a supernova light bar that says it needs to be attached to the high beams. I am using one of the 30 amp switches for the bar and was wondering if I can attach the high beams wires to the other 30 amp switch on the panel instead of splicing it to the globe. Any suggestions are appreciated.
file:///var/mobile/Library/SMS/Attachments/73/03/F054F67B-A94B-4A05-B8CD-DD950E9E9A81/IMG_9727.jpeg
I bought the 8 Gang switch. I have a Teryx 4. Any recommendations on where I should mount it under the hood? I don’t want it to get soaked if I end up going through water.
I put mine on the air box lid with outdoor Velcro. 👍
Deranged Off-Road How did the Velcro hold up when riding?
How did you mount it up top? Also wanting to do the same thing when my kit comes in.
I had some scrap metal lying around. Just painted it and screwed it to the bar. -Joe
Where did you get the power fuse box? Looks great
Thanks. Picked it up on Amazon. Link is in the video description. -Joe
Do you have info on the a pillar mount that screws into the rear of the Tallon roll cage to mount whips?
Still testing. We haven’t released them yet. Keep en eye on our IG. -Joe
@@DerangedOffRoad Any update on the roll cage whip mount brackets???
Where did you get the orange base plate you used to mount the circuit breaker and fuse box to the frame???
I had some scrap metal laying around so I cut it and painted it using Chevy engine block orange. -Joe
Do you have any Dimension measurements for the plate?
I like the fuse panel, I was not able to see the link for this product.
Racheal Soliz the fuse box comes with the switch panel
Could you help me out on how you wired the key on wire!
Under the hood and dust cover, there is a blue connector with nothing on the end of it. One of those two wires is the key on power. I believe it’s the green and white one. You can buy the pigtail or just splice in. I think I point out the correct wire in the video. -Joe
So quick question ? Where do the wires of the accessories go connected to the switch provided ?
All connections are in the box mounted on the orange plate behind the dash. -Joe
I just installed the 8 switch and i couldn't get power from the wire in back of the battery, mounted eveything but could not get power connected the wire w blue tape to battery to no avail could.the trip fuse be burned I reset the switch and still nothing
The wires are not hooked to the battery from the factory.
Sorry to bother u what size is your utility trailer for your talon I just bought 1 trying to figure out what size trailer to buy
It’s a 7x16 but we also have used a 7x14 and they both work great. -Garrett
Mine is a 14’ tandem. Doesn’t leave a ton of room but it’s pretty ideal otherwise. It will fit on a 12’ with no gate as well. -Joe
Thank you
Over 1 year later.. how is that 8 gang switch panel holding up. I've read mixed reviews.
Well so far it has been completely fine in both the Talon and Xrc. We actually just bought one for the new Pro Xp as well.
@@DerangedOffRoad Thank you. I am still undecided how to handle switches in the new Talon. I don't want to destroy the dash by installing switch plates; I did find a remote switch controller - but rather pricey.
I wouldn’t buy this one! Mine is junk and I know another guy who’s had 3 of them and all were junk! The Chinese are out to get us Americans one way or another!!
what kind of fuse block is that?
The link is in the description below
Sorry to bother u my question is this are u planing on doing a dual battery set up I just purchased a talon x4 I’m wanting to instal some lights and sound bar but I can’t make up my mind if I should do a dual battery
Honestly, if you’re not planning on running a crazy stereo or whatever, I have found one battery is plenty for your accessories. I have never needed a dual setup and I run easily five to six accessories on my machines. -Garrett
@@DerangedOffRoad I am wanting to install a 40’ single role light bar and I have rear view mirrors with front lights and a sound bar and maybe 2 usb hookup for phone and tablet would that be ok or to much
You should be completely good. My KRX runs a 43” light bar, side mirror lights, rock lights, lighted whips, chase light and a Com system. -Garrett
@@DerangedOffRoad ok cool thank u
I bought the switch plate and love it. I’m hoping you can help me with a question
I bought a supernova light bar and it says it has to be connected to high beams to get power. I am using the 30 amp for the bar, do you think I can use the other 30 amp switch to wire the high beams? Any advice is appreciated.
file:///var/mobile/Library/SMS/Attachments/73/03/F054F67B-A94B-4A05-B8CD-DD950E9E9A81/IMG_9727.jpeg
Dude you covered the winch Solenoid mount. That power plate should be some other place. Not what I would do,. Check out other videos and you will see what I mean.