Video není dostupné.
Omlouváme se.

UTV Electrical Wiring and Accessory Lights

Sdílet
Vložit
  • čas přidán 15. 08. 2024
  • In this video Dave talks about planning and running the wiring for the various accessories, accessory lights and what fabrication had to be done. The goal was to make as much of the work look factory and mission was accomplished. Follow the journey of the UTV Project as we talk electricity. Thanks for watching!
    Check out our webpage for an accompanying article that lists out the tools, supplies, parts used and have some additional information.
    www.gunsandtac...
    Check out the entire UTV Project
    • UTV Project
    As always if you have questions, please reach out at theqa@gunsandtactics.com
    Be sure to check out our website for more.
    www.gunsandtac...
    Social Links:
    - Instagram: bit.ly/3oelbin
    - Facebook: bit.ly/2T9lP2c
    - Twitter: bit.ly/34bAMXE
    - Patreon: / gunsandtactics
    - The views and opinions expressed in this video are solely those of the original authors and contributors. These views and opinions do not necessarily represent those of Guns & Tactics, the administrative staff, and/or any/all contributors to this site.
    - Affiliate Disclaimer: Guns and Tactics is reader/viewer supported. This post may contain affiliate links and we may earn a small commission when you click on the links at no additional cost to you. As an Amazon Affiliate I earn from qualifying purchases.

Komentáře • 24

  • @jaywilliams415
    @jaywilliams415 Před 2 lety +1

    Impressive rig...
    & lighting work!

  • @todaywithtrevor9082
    @todaywithtrevor9082 Před 4 lety +2

    Dude... nice work! Well done! I am glad you built it!!!!

  • @busterdog64
    @busterdog64 Před 10 měsíci

    this is cool

  • @numismatist8228
    @numismatist8228 Před 4 lety +1

    This thing is a beast!!

  • @javierfernandezsainz-trapa7561

    Nice work, excellent explanation!!

  • @hunterking94
    @hunterking94 Před 3 lety

    bro unbelievable good work

  • @JonesCreekRetreat
    @JonesCreekRetreat Před 5 měsíci

    Ok super super beginner here. I own a side by side and I wanna learn! My school did not have a shop teacher and I must not have paid good enough attention in any lessons on electrical because many of the things you described went over my head. But I’m a quick learner and all about being organized as you definitely are. Where do you recommend I begin?? Do you have videos that are more basic that I should watch? I mean I was googling definitions of volts and amps lol I need like the buggy wiring for dummies version lol🙈🙈 THANK YOU for any info or direction you can share 🙏🏻🙏🏻🙏🏻

  • @chrissewell1608
    @chrissewell1608 Před 4 lety

    That was a very clean install. I would have zip tied my wire bundles or put them in a shielded wrap (Maybe you did that?). I want to see more on that control panel in use. And how you programmed it.

    • @GunsandTactics
      @GunsandTactics  Před 4 lety +1

      I’ll have a focused video on the switch pro

    • @GunsandTactics
      @GunsandTactics  Před 4 lety +1

      Wire bundles are nice and wound. Zip tied and neat. Couldn’t get that on camera

    • @chrissewell1608
      @chrissewell1608 Před 4 lety

      @@GunsandTactics Whew! I thought I wouldn't be able to sleep tonight, if it wasn't.... LOL. Just kidding. I grew up in The boating industry. And there was nothing nicer, to me, than a super clean and tight, install. I am the still the same way. 10x longer to install = 100x better results! 👍👍🏆

    • @GunsandTactics
      @GunsandTactics  Před 4 lety

      Agree! Switch pro video is live as well

    • @brianspinney6477
      @brianspinney6477 Před 3 měsíci

      What would the switch pro cost if you do mind me asking I have ap 2010 hisun utv 700 4x4 it's the same as a 2006 yamaha rhino 660

  • @kall3467
    @kall3467 Před 2 lety

    I'm curious to know what you used as a terminal/ fuse block. I didn't see anything listed in your parts list.

  • @MkIVDave
    @MkIVDave Před 3 lety

    Can you provide details on the upper light bar you have installed? Does it change colors as I’m look for green to support night hunting? Can you give me some details on the brackets you used to secure it? Lastly, how did you order the different color wires and the naming device? Thank you Sir for the info!!!

    • @GunsandTactics
      @GunsandTactics  Před 3 lety

      It’s discontinued as I understand which is why I haven’t done a separate video on the light bar. This one is dual color white and amber, it was made by a company called Sierra. The brackets are from Tim Salts, search online for Design Unlimited Honda pioneer and you’ll find them.

    • @GunsandTactics
      @GunsandTactics  Před 3 lety

      The different color wires are a part of the switch pro wiring harness. You can see more detail in the review video

  • @vikkleo
    @vikkleo Před 3 lety +1

    Holy crap my head hurts so much wires to much info lol

  • @rockytoptech1308
    @rockytoptech1308 Před 2 lety

    Is the programming hard for this???

    • @GunsandTactics
      @GunsandTactics  Před 2 lety +1

      Check out the Switch-Pros review video I did. It goes over programming which uses their app. It works but the app could be better

  • @rustypryor6912
    @rustypryor6912 Před 8 měsíci

    why did i waste my time, im a level 2 with this stuff and your playing on God mode