Good video, I was wondering what size fuse to use between the battery and the new fuse box. Thanks also for the recommendation of 8 GA for the wire from the battery
Always good to learn more wiring info! Any recommendation for a rearview mirror for the UForce1000? There’s no roll bar to mount to and most aftermarket mirrors seem to require one for a pipe mount. There’s a tab on the roof and it looks like it’s for a clamp style mirror, but I can’t find a substitute for the factory one at $80. TYIA Mr. Moto!!
Awesome thanks! I was looking to buy a UForce 1000 uni air filter on your Amazon site but I didn’t see any. Maybe I just missed it. If you have any left tell me how to order!
Any chance to show which wire is the ACC on a 2022 z force 950? I'm trying to connect #6 pin on my rocker to the ACC so my switch lite works with the key!?!
Do you know if the plug and play bus bar on the cf moto site is keyed power only? Because with the kemimoto universal blinker and horn kit weather hooked up to battery or winch the horn button stays illuminated at all times and don't want to drain the battery.
Hate to bother you man but you know your stuff and you’ll answer questions…I’m installing whip lights and they have wiring for turn signals and brakes but I don’t have street legal kit..what do I do with these wires since I’m not hooking them to anything? They come out of the whip control box.
I'm trying to figure out if hooking this up directly to the battery like you say, will illuminate these rocker switches that illuminate? It seems like it would. I have a powered windshield I just installed on my new 2024 UForce 1000 and I had to cut a blade connector down (to skinny) to insert into the large 10 pin plug under the hood in order to get a keyed power source. I now am thinking of adding a soundbar which presents another keyed power requirement with another illuminated rocker switch. I am thinking about just adding this setup for both if I can figure out how to make the whole thing keyed power. I know there's an empty keyed power plug under the seats for the heaters but I hate to mess with those. Any suggestions? Update: He does cover running a remote wire to your existing fuse panel to power the new one from keyed power. I just missed it when I watched it the first time. That's what I get for listening and doing 2 things at the same time, lol.
Thanks! I was mistaken and I am going to edit my question above in case no one clicks on these replies to see what I am about to say, because I watched your video again and you do explain that a remote wire for this fuse panel can be run to a keyed power source on the existing fuse panel with an included fuse tap. @@R.N.GPerformance
On the switch panel I don’t have a 15a fuse..it’s either 10 or 20 and my lightbar has a 15 inline on it that I won’t be using. Should I run it to the 20 or replace one of the slots with a 15a fuse ?
Hey. Kinda off topic here, but can anyone help with this question? I have a small set of LED whips and I'm not ready to put one of those panel switch things in yet, so I have an inline fuse. What size fuse should I use?
Actually what you should do is read the specs on the whips and then size your fuse to the next size available above your whips base power requirements.
I plan on getting accessories for my Yamaha Rhino 450,& all these videos have me confused.I understand the fuse panel Info.,the relay,& inline fuse.Where I get lost,is making all the connections.A switch goes in the dash;where do the wires go from there?,I plan on getting the 5 pin rocker switches.Where do the wires from my accessories plug into?If you could contact me on Facebook or text me, that would be great.Any help would be greatly appreciated,thank you.Great video ⭐⭐⭐⭐⭐ Sorry that I seem so dense 😕
@@R.N.GPerformance Sorry that I didn't call, not much of a phone talker,plus my phone is pre-paid, so I have to watch my minutes.I had to remove snow that morning,then go to a rhematology appointment in the early afternoon.You can text me on Facebook messenger, with the information,if you want to.
You can get this switch panel on my website www.rngperformance.net
Just ordered your switch panel kit. I have been looking for something like this. Thanks!!
Thank you for your order. Your very welcome 🙏
Your channel is awesome the best. Love your videos Amigo
Thank you 🙏
Another concise read brother !
Thank you 🙏
I really like the ideal that I can shorted the power off the winch as apposed to the battery direct. Thank you
Your welcome 🙏
But if you have light bar while using the winch does it dim the lights at all? I'll be doing alot of night plowing. So just wondering?
This is exactly what I need.
I hope it helps
Outstanding amazing video. Thank you so much for sharing
Your welcome 🙏 thank you 😊
Good video, I was wondering what size fuse to use between the battery and the new fuse box. Thanks also for the recommendation of 8 GA for the wire from the battery
40A will work. Thank you 🙏
Always good to learn more wiring info! Any recommendation for a rearview mirror for the UForce1000? There’s no roll bar to mount to and most aftermarket mirrors seem to require one for a pipe mount. There’s a tab on the roof and it looks like it’s for a clamp style mirror, but I can’t find a substitute for the factory one at $80. TYIA Mr. Moto!!
Let me take a look and see what I can find. I think you can make this one work. amzn.to/3FP8Zz4
Awesome thanks! I was looking to buy a UForce 1000 uni air filter on your Amazon site but I didn’t see any. Maybe I just missed it. If you have any left tell me how to order!
@@terrahillfarm those are on my website www.rngperformance.net I don’t think I do but I will soon.
Any chance to show which wire is the ACC on a 2022 z force 950? I'm trying to connect #6 pin on my rocker to the ACC so my switch lite works with the key!?!
Do you know if the plug and play bus bar on the cf moto site is keyed power only? Because with the kemimoto universal blinker and horn kit weather hooked up to battery or winch the horn button stays illuminated at all times and don't want to drain the battery.
Hate to bother you man but you know your stuff and you’ll answer questions…I’m installing whip lights and they have wiring for turn signals and brakes but I don’t have street legal kit..what do I do with these wires since I’m not hooking them to anything? They come out of the whip control box.
You can just cap them off my friend. If your not using them.
So if I'm wiring a led lightbar would I use the wiring harness that comes with it or just run my own wires. I do have the switch panel.
Just run your own to the switch panel buddy.
Do you still sell this fuse panel
Yes sir we do.
If you wire into the winch, would it be too much if you're using the winch for a snow plow with light bars on?
No. Because the plow don’t put a huge load on the winch.
I'm trying to figure out if hooking this up directly to the battery like you say, will illuminate these rocker switches that illuminate? It seems like it would. I have a powered windshield I just installed on my new 2024 UForce 1000 and I had to cut a blade connector down (to skinny) to insert into the large 10 pin plug under the hood in order to get a keyed power source. I now am thinking of adding a soundbar which presents another keyed power requirement with another illuminated rocker switch. I am thinking about just adding this setup for both if I can figure out how to make the whole thing keyed power. I know there's an empty keyed power plug under the seats for the heaters but I hate to mess with those. Any suggestions?
Update: He does cover running a remote wire to your existing fuse panel to power the new one from keyed power. I just missed it when I watched it the first time. That's what I get for listening and doing 2 things at the same time, lol.
Give me a call I can get you one of these that has keyed power option. 3308060728 I’m in the office from 9AM-5PM est M-F
Thanks! I was mistaken and I am going to edit my question above in case no one clicks on these replies to see what I am about to say, because I watched your video again and you do explain that a remote wire for this fuse panel can be run to a keyed power source on the existing fuse panel with an included fuse tap. @@R.N.GPerformance
💪👊
On the switch panel I don’t have a 15a fuse..it’s either 10 or 20 and my lightbar has a 15 inline on it that I won’t be using. Should I run it to the 20 or replace one of the slots with a 15a fuse ?
Run to 20 buddy.
Thanks my man..didn’t know if that would cause an issue if it was trying to blow fuse
Can you do z force 500 no ignition spark??
I’ll try
Do you have a ecu tune for a 2019 Z force 1000
Www.atvflashing.com does.
Dang wish I could get this but it’s out of my price range lol
I’m sorry 😢
Hey. Kinda off topic here, but can anyone help with this question? I have a small set of LED whips and I'm not ready to put one of those panel switch things in yet, so I have an inline fuse. What size fuse should I use?
15A
@@R.N.GPerformance awesome. That's what the inline fuse came with. Lol. Thanks a bunch!
@@CF-BRADY yw.
Actually what you should do is read the specs on the whips and then size your fuse to the next size available above your whips base power requirements.
I plan on getting accessories for my Yamaha Rhino 450,& all these videos have me confused.I understand the fuse panel Info.,the relay,& inline fuse.Where I get lost,is making all the connections.A switch goes in the dash;where do the wires go from there?,I plan on getting the 5 pin rocker switches.Where do the wires from my accessories plug into?If you could contact me on Facebook or text me, that would be great.Any help would be greatly appreciated,thank you.Great video ⭐⭐⭐⭐⭐ Sorry that I seem so dense 😕
Give me a call tomorrow 3308060728
@@R.N.GPerformance
Sorry that I didn't call, not much of a phone talker,plus my phone is pre-paid, so I have to watch my minutes.I had to remove snow that morning,then go to a rhematology appointment in the early afternoon.You can text me on Facebook messenger, with the information,if you want to.