I dont have , only in my head. All parts randomly use and CNC machined from the depending of the situation. The double wishbone is a preaty standard suspension, the only new thing is the tilting mechanism to joint them.
@@flightdisplay7618 The all linkage and design is DIY and randomly use what i found in my garage. So i dont know, maybe some standard GL joints and some other own designed CNC parts.
Good job bro. One question. The springs are connected to the body frame so when u tilt, springs also get compressed in that direction. Is that force small to ignore?
I dont know what do you mean exactly. The spring force not effect considerably for the suspension geometry. Otherwise the spring stiffness is too strong for this setup, its my fault. :)
Good project, but you seems not to trust either the geometry of the trike or its holding ability.. Because you hardly put your feet on board, esp when cornering and when starting🤔 Anyway nice build👍
If you a motorcycle man, this trike trick your mind! When you lean right automatically push left the handlebar in motorcycle. But in this trike mean you go straight forward :) So you must throw what you learn for a ride this time. Driving technics are drifferent, and this video is made from my early first driving experiance.
Best laugh I had in ages .. Learn to ride it ,. before making a video .. Brake lines are too near the ground . how about dual brake discs , As you discovered . the rear wheel is too near the swing arm .. list is long ...
Its true, but fun way to drive :) I gain a lot experiance for a bigger project. This Jog only a good joke like ride on a bull. :) But you mistake one thing, the stability and cornering response better at high speed. Between 20-30 km/h the suspension and steering becom interference.
@@adamhorvath2483 Hi Adam, have a lock at my Hyena trike, czcams.com/video/_AwvXaBogZo/video.html . The foot plate allow you to apply pressure and shfit the apex where the two front suspension springs meet.
Awesome !! Looks so fun to ride, love it 👍
El $$$$ y en donde la puedes adquirir XF. Si no de nada SIRVE este anuncio o TRABAJO GRACIAS
Estou querendo fazer um amei o projeto. Qual o espaço e comprimento de um cano no outro este que vai TODA a suspensão dianteira
Good job and nice creativity.
Can I get the blue print plans?
I dont have , only in my head. All parts randomly use and CNC machined from the depending of the situation. The double wishbone is a preaty standard suspension, the only new thing is the tilting mechanism to joint them.
Wow! brilliant job!
Great Video 👍👍👍
Great Channel 👍👍👍
👋👋👋👋👋👋
Great job! would you be able to share the suspension design? I would like to build a vehicle like that for me.
Whatever you want! Good working!
@@adamhorvath2483 Thanks! It is not clear to me what kind of joints you used. Can you please share the specs of the joints?
@@flightdisplay7618 The all linkage and design is DIY and randomly use what i found in my garage. So i dont know, maybe some standard GL joints and some other own designed CNC parts.
The world needs you
Good job bro. One question. The springs are connected to the body frame so when u tilt, springs also get compressed in that direction. Is that force small to ignore?
I dont know what do you mean exactly. The spring force not effect
considerably for the suspension geometry. Otherwise the spring stiffness is too strong for this setup, its my fault. :)
Basically Amazon swing arm set up the rest is set up idk about cnc but ok man maybe ya did. Or neccessary tho
Good project, but you seems not to trust either the geometry of the trike or its holding ability..
Because you hardly put your feet on board, esp when cornering and when starting🤔
Anyway nice build👍
If you a motorcycle man, this trike trick your mind! When you lean right automatically push left the handlebar in motorcycle. But in this trike mean you go straight forward :) So you must throw what you learn for a ride this time. Driving technics are drifferent, and this video is made from my early first driving experiance.
Thanks so much, i really appreciate for reply, i have got you now, i hope to build one in future,
All the best hoping to see more from you🙏🙏
If this has to be ridden with your feet on the ground as outriders ....Then that is an Accident waiting to Happen!!!!!
Well done, like to do this on my motorcycle.
I like it.
where did you get all the front end part??
Its all DIY from a previously project. Originally its a Yamaha Jog 3kj.
Wooow nice
Передние колёса электро сделать и будет 3*3 техника!!!
good idea
Step measure,measure,or measure is blank video
Nice 👍
K
Jjjjbjjjjhn
Супер 👍👍✌️✌️✌️👏👏👏
Very good 👍👍👍
Класс видео Малодец
Very Nice vidéo, good job
Gujarat surat
KURVA ! TIP TOP BRAVO
Best laugh I had in ages .. Learn to ride it ,. before making a video .. Brake lines are too near the ground . how about dual brake discs , As you discovered . the rear wheel is too near the swing arm .. list is long ...
Its a fun project man, nothing serious. Chill maaan 😅
I am india
VENDETA
All that effort and it's no good. No way to counter the centrifical force when you corner at speed. Better keep those gum boots on!
Its true, but fun way to drive :) I gain a lot experiance for a bigger project. This Jog only a good joke like ride on a bull. :) But you mistake one thing, the stability and cornering response better at high speed. Between 20-30 km/h the suspension and steering becom interference.
What does it mean by 'counter the centrifical force'? No way to return during conering?
@@adamhorvath2483 Hi Adam, have a lock at my Hyena trike, czcams.com/video/_AwvXaBogZo/video.html . The foot plate allow you to apply pressure and shfit the apex where the two front suspension springs meet.
Adim ölçü yokmu ölçü yok boş olmus