Washing machine Shut Off valve replacement. Замена кранов для стиральной машины

Sdílet
Vložit
  • čas přidán 10. 09. 2024
  • Laundry Room Remodeling, Part 9.
    Перепланировка постирочной комнаты.
    Washing Machine Water Feed Valve Replacement
    #DIY, #Howto, #valve

Komentáře • 37

  • @taritavirtue
    @taritavirtue Před 3 lety +1

    excellent job!! i have to do the same thing this week. your video was a wonderful how to! thank you so much!!!

  • @CLCinflorida
    @CLCinflorida Před 3 lety +1

    EXCELLENT TUTORIAL VIDEO... 👍👍👍

  • @analuo...
    @analuo... Před 4 lety +1

    good job

  • @TheKoozia
    @TheKoozia Před 4 lety

    мне нравится что в США краны для стиральной машины идут с гасителями гидроударов.

    • @FixitAll
      @FixitAll  Před 4 lety +1

      Есть с ними и без них, на любой вкус заказчика.

  • @screaming1967
    @screaming1967 Před 4 lety +2

    The reality is somewhat different

  • @smittysmitty4681
    @smittysmitty4681 Před 2 lety

    Once the pipes are soldered you don’t have to make sure it doesn’t leak like it it’s good to go?

    • @FixitAll
      @FixitAll  Před 2 lety +1

      If you do it first time sure, you must check it. I am 25 years do it and I know how to do it ones and forget it.

  • @gyver471
    @gyver471 Před 3 lety

    Where’s the p trap did you put it in the basement? And the mini vent is that because you don’t have any venting?

    • @FixitAll
      @FixitAll  Před 3 lety +1

      Went pipe you can see in first seconds of the video. It was cut off and removed during installation wide window. P-trap just 2 foot below the valve box.

  • @foxesandarrows
    @foxesandarrows Před 3 lety

    What is the jelly that you put into the and around the copper pipes? Around the 4:20 mark.

    • @FixitAll
      @FixitAll  Před 3 lety

      You mean 3:20 , not 4:20.

    • @FixitAll
      @FixitAll  Před 3 lety

      H-20 1.7 oz. Lead-Free Water Soluble Solder Flux Paste
      www.homedepot.com/p/Oatey-H-20-1-7-oz-Lead-Free-Water-Soluble-Solder-Flux-Paste-301302/100177185

  • @michaeldemontis1287
    @michaeldemontis1287 Před 4 lety

    That is an exterior wall, dont forget the vapour barrier like he did.

    • @FixitAll
      @FixitAll  Před 4 lety +1

      Depend on your state and local code. Not required in my area.

  • @antonsalivon4079
    @antonsalivon4079 Před 2 lety

    Хорошее видео. Как раз то, что я искал. Точно такой же laundry box устанавливаю скоро. И беспокоился о пластике, когда solder copper pipes. На амазоне народ некоторый сильно повреждает пластик. Вижу, что можно аккуратно сделать. Спасибо. Кстати, если я пластик прикрою мокрой тряпкой, будет лучше?

    • @FixitAll
      @FixitAll  Před 2 lety

      Обычно если трубы идут просто в низ к полу, то я сразу впаиваю обрезки труб длиной по 6-8 дюймов, пока ещё коробка в руках/на столе. Тогда есть возможность хорошо обмотать и намочить даже сам кран. Ну и потом уже с обрезками вставлять в трубы на соединительных муфтах (coupler). Здесь же такой возможности небыло ибо загибалась труба сразу в право.

    • @antonsalivon4079
      @antonsalivon4079 Před 2 lety

      @@FixitAll спасибо за совет. У меня как раз ситуация что я делаю новую коробку в новой стене. Так что и предполагал сделать удлинения к shut off valves, а потом спокойно приваривать к общей системе. Спасибо.

  • @AllaSmith
    @AllaSmith Před rokem

    Здравствуйте! Скажите, а как закрутить valve для подачи холодной воды, он стал болтаться когда его пытались закрыть? Он как будто сорван теперь. Менять или можно еще починить? Спасибо ☺️

    • @FixitAll
      @FixitAll  Před rokem +1

      Без фото сложно сказать.
      Вы в США?

    • @AllaSmith
      @AllaSmith Před rokem

      @@FixitAll да, я живу в США.

    • @AllaSmith
      @AllaSmith Před rokem

      Вы случайно не в Мизури живете?!!😄

    • @FixitAll
      @FixitAll  Před rokem

      @@AllaSmith Washington, Seattle area.

    • @FixitAll
      @FixitAll  Před rokem +1

      @@AllaSmith вы можете мне на ФБ Messenger кинуть фото. Профаил Vasiliy Ivanov и аватарка гайка с надписью Fix it All.

  • @peterbergeris6510
    @peterbergeris6510 Před 3 lety

    Is there a box for water lines coming down from upstairs to basement?

    • @FixitAll
      @FixitAll  Před 3 lety

      Regular lines like in all American houses.

    • @peterbergeris6510
      @peterbergeris6510 Před 3 lety

      @@FixitAll The water lines for these boxes are coming from below. Mine are above coming down. We have a drain hose draining to a laundry tub.

    • @FixitAll
      @FixitAll  Před 3 lety

      @@peterbergeris6510 Oh, yes, some times i saw unusual connections in laundry too.

  • @luciohuet8513
    @luciohuet8513 Před 4 lety

    What's the name of the music? Please.

    • @FixitAll
      @FixitAll  Před 4 lety

      Sorry i can't remember, some from CZcams.

  • @bobrobertson9636
    @bobrobertson9636 Před 4 lety +2

    I really and truly dislike a laundry room without a sink. How do you rinse any thing, prewashing is out the window. Washing machine nowadays turn off the water when you open the lid. So if get soap on your hands you have to ran to a different room to wash. Pain in the ........

    • @FixitAll
      @FixitAll  Před 4 lety +1

      Looks like you should watch Part 1 - here is what around in this room - czcams.com/video/LhefnJ353G0/video.html