Peugeot 3008 1.6 turbo petrol P2603 anti-pollution fault. Fault finding and repair.
Vložit
- čas přidán 23. 08. 2019
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
This car came to me with a couple of faults...
On this video we will be looking at the one causing an engine light ON and anti-pollution faults on the screen, P2603.
Follow me on this video to find out what was the problem and how to resolve it.
The temperature gauge issue on a 307:
• Peugeot 308 1.6 VTI en...
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching! - Auta a dopravní prostředky
I have a Peugeot 1007 1.6 16 valve petrol, best car I've ever owned. Love it.
Excellent advice for P2603: first check electrical connections. I solved the problem on a 5008 from 2009 just by disconnecting and reconnecting the small connector at the engine ECU. Fixed the issue in no time. Thank you.
😊
👍👍👍
I love it when you take things apart, I learn so much from you, thank you!!
Thanks... for watching and for your comment!
There should be a law against folks dropping cars off with no fuel...lol. Great video, thanks.
😂
Thank you for watching and for your comment!
I have watched nearly all your videos now I run a small garage in the north of France and I must say I am very impressed with your methodology and the way you approach diagnostics ...I'm very impressed well done keep up the good work and excellent videos!
That's great Andy!
Thank you for watching and for your comment!
👍👍👍
oh man you dont know how your videos so priceless to me ,thank you very much for your time and knowlge that you share it here .
Naif from riyadh 👍🙌
😊
No worries...
Thank you for watching and for your comment!
👍👍👍
Thanks for the video,man you just got me to want a 3008 seems like a great car despite the faults you are dealing with.
😊
👍👍👍
Great job. Thanks for sharing Luis 👍
Thanks!
👍👍👍
Sweet Luis top job 👍👍👍, I’m glad the Maxisys was able to do an active test after coming out of economy mode 😉👍👍
Yes... thanks Igor!
👍👍👍
Very helpful video 👍 I like it
Thanks!
Excellent video as always... Looking forward to see the video on how to deal when clearing codes reach max. Like 40 or 50..but I scaned cars that reached the limit.. And codes are cleared with no problem.. But the session is not recorded anymore.
Yes... that's correct... it can be reset on the eeprom...
Thank you for watching and for your comment, really appreciated!
👍👍👍
Good morning, nice vdo as usual
Thanks!
👍👍👍
GOD BLESS YOU MAY GOD REWORD YOU FOR THE GOOD THINGS YOU BENG DOING THANKS
Very helpful! Thank you.
☺️
👍👍👍
Hi and thankyou for your promt reply, the light i am refering to is the one that tells you the time and date above the cd radio player it will not stop flashing.
Just set the time and date... should stop...
yes good video, very informative, enjoyed it thanks
👍👍👍
Great job 👍👍👍
Thank you!
👍👍👍
Very good well done
Thanks sir!
Hello Mr Mechanic, was it recirculation pump failure caused depollution light on?
very good my brother
Thanks!
👍👍👍
Good and useful thanks
Thanks!
Great. Thanks.
Thanks!
Excelente! I'm hoping this video is one from your stash.... it's too early to think about cold here! Lol Although summer is coming to an end, sadly.
No damage to running that pump dry? Just curious. It was only short bursts, but it always worries me.
No... no problem running it dry for small bursts...
Yes... all my videos are from the stash... lol
The videos is am recording now, will be published around January....😋
Hi Colega,!Nice good video again, When did you record this video, - 2°c,outside,is to cold for august. 😁How did you get of economy mode? Do you have video how you solved it out the key fault? My next questions is, not belongs to this video, but I have renault zoe 2015,electronic one, cannot be charged, fault. What do you think what diag can read the fault, Can clip can be? Or do you have recommended one? 🤔
Hi
This was recorded about 6 months ago... that's the delay on the videos I am publishing... unless you are on patreon...
No, I have not done a video for the key... sorry...
For the zoe, I believe clip will read it just fine...
👍👍👍
Hello, please I have this same problem on my Peugeot 3008. Is there a way I can contact you for repairs please
Thanks for sharing. You should be able to exit economy mode from the BSI.
As soon as the engine starts, he car comes out of economy mode...
Thank you for watching and for your comment!
There is no problem clearing codes after the 40 or 50 limit. The only diference is that you cannot record the mileage, but codes ARE cleared.
Just answered that... lol
It is also possible to reset that in the eeprom....
Thanks for that!
Hello, thanks for the video, I really appreciate viewing and you’re explaining well.
I have the same problem on my car, it’s a Peugeot 207 1.6 THP 150, I just replaced the timing chain with all the needed parts and I have also done an cylinder head grinding with new valve stem seals, after running the car I have the exact same problem, engine light on with fault code P0131 & P2603, when I rebuilt the engine I have also changed the water pump of the turbo and the O2 sensor but the fault codes are still there, I have also checked all the wires and they’re good.
Please do you know how I can fix this problem ? Thank you a lot.
I have the same issue with an 5008 1.6 thp. Wiring good, pump new same fault code
Did you solved it already?
Hi can you tell me what the cause of the flashing light above the cd and radio player please my car is doing the same thankyou.
Hi
What light are you referring to?🤔
Thank you for watching!
There are reports when auxiliary coolant pump is broken that engine ecu can’t be reached by diagnostic..after pump was replaced communication with ecu was established normal
Possibly... never had that issue yet...
👍👍👍
Hye just wondering if you have any ideas my fiat doblo 1.4 petrol has had a fault now for over 2 years no one can fix it is intermittent some times imobiliser light stays on and car cranks but does not start I have had both keys checked by 3 diffrent places I have had ecu tested I have removed the bcm had it tested I have 3 fault codes D602 D600 U1600 the car seams better in the hot weather strange any ideas
Check wiring etc... ground points as well... surely you will find some rusty ones....
Thank you for watching and for your comment!
Hi
There is a recall on those pumps because they can catch fire to the wiring harness.
Checking for recalls would save your customer money.
👍
Thanks!
Nice idea. But that's the constructors responsibility, not the after sales independent garages concern.
Now I know this is the thing which often keep on running after I stop engine, I thought earlier it's the turbo itself
😊
👍👍👍
hi
i have this problem occasionally my citeroin mechanic advise to leave it alone and advise to cool the engine the old way
cos the pump help in cooling the turbo when hot and you turn off and ecu advise to cool the turbo more
what do u think
I would get it sorted...
👍
@@LMAutoRepairs
But does he say. A real information
I'm couris
Hi, congratulations for your videos, I hope you answer me. anti pollution system faulty was it giving you an error due to the turbo fluid pump? I have the same problem and sometimes the car loses power when I clear the error with waves the car runs fine for 1 or 2 days, and then it reappears.thank you so much for your help.
Hi
If you have the same code as the one on the video, all the information is there...
👍👍👍
@@LMAutoRepairs Thanks 👍
I truly love your channel, it's like treasure chest! I have problem with turbo water pump - it stays on and I have p2601. The electrician can't find that short :( This is happening even after placing new pump. Do you have some suggestion what to look next? Pump works - it just stays on too long :)
I trace wires, if you believe that there is a short somewhere...
👍👍👍
Hello, I have the same issue, did you find the problem ? Thanks
Hey Leo How can you actuate a bruchless motor with just positive and negative leads I think it's a simple dc motor am I wrong?
No you are not... Brush or brushless should run when 12v is applied to it!
Thank you for watching and for your comment!
OK because I saw some video in CZcams talking about brushless motor and actuate it you need to change polarity
Whats the official way of work, when the ECU reaches the 40 clears ? Replacing the ECU ??
good question
@@salahomar9869
I never got to it, nor ever actually researched...
I have "heard" that you can carry one doing the reset, but you will not be able to save the details... reason why asks to put the mileage at the time of the reset.
It is possible to reset this, in the eeprom...
The day I have one, I will make a video for it...
LM Auto Repairs hy u can check this code on your maxisys P1613 it’s for a Saab v6 tid thx
@@mihaiardelean9271
That's an immobilizer fault or corrupted immo data... what was done on the car?
LM Auto Repairs i replaced two times the TWICE module control I’ve synchronized all with tech2 but the same result engine start after 10 min go off with the same results I have two TWICE identical, my old one is not responding at all after the water go in sow a buyed one the same number and I’ve synchronized with tech2 and tis2000 all is good but the error is there after 10 min 15 min
Are you disconnect battery when you checking electrical installation?
In this case no...
Thank you for watching and for your comment!
But in other case?
@@AssholeLS
I usually don't disconnect the battery... unless I need to strip wires, or doing certain checks on airbag systems...
Hi how did you installed the pump is there any need of bleeding?
Cheers
No... no need for bleeding..
Just make sure you top up any coolant you loose...
Thank you for watching and for your comment!
@@LMAutoRepairs Thanks a lot.
merci beaucoup meme je parle pas l'anglais tank you verry match
We can always use a translator...😉
Thank you for watching and for your comment!
Hi, I have a problem with the Peugeot 207 1.4 vti 95 ch. When I checked it, it says the p1340 problem. It changed the candles and the same problem, but this problem does not come every day when I leave the car.
That code is for the camshaft sensor... if I am not mistake... can also be the timing...
Thank you for watching!
Thank you for the response, but I changed the cams. The problem is still p1340. Please help me. I am in a country that does not know that they are working on this type of engine. I have lost a lot of money all his savings in a lost month. That moment, knowing the engine has never opened, the distance is now 175400km
@@oukaciamine211
Right, first you said you changed the "candles"... which I presumed you meant the spark plugs?
Now you say you changed the cams... why have you changed the cams?
While the cams where out, have you checked the dephasers?
Was the problem there before the cams changed?
ANY psa vehicle when in economy mode many functions doeant operate ie windows not work,h-lamps, flasher all block due to economy mode.
Correct!
👍👍👍
you need to connect the maxisys to the multimeter and run a diagnosis. i got a citroen in eco mode that bidirecional tests didn't work too. must be the eco mode
LoL
...good day
😊
👍👍👍
👍👍👍
☺️👍
👍
😘
you can remove the economy MODE from bsi with your daig
As soon as the engine starts, the car comes out of economy mode....
But the MaxiSys can also do it...
Thank you for watching and for your comment!
great job, but don't remind me of winter coming
😂
True... getting closer now...
👍👍👍
Peugeots all have the same problems with Anti pollution, engine cutting out, gear boxes. I have a Peugeot 207 Ive put a lot of money into fixing, and can't wait to get rid of it, Will never buy a Peugeot again.
For the diesel ovner change your fuel filter and clean your egr valve your issue will be sort, and you can thanks me from here
What is the exact issue I am resolving by doing that?
Thank you for watching!
@@LMAutoRepairs anti pollution system fault
Looks like you have not watched the video...
Was nothing to do with egr or fuel filter...
@@LMAutoRepairs your video title is anti pollution fault so I have recommended a way for diesel 3008 1.6 users ,don’t you get it?
No...
The message "Anti pollution fault" is a generic message used by Peugeot and citroen for a series of faults that can affect emissions...
As you might have seen on the video, the fault was nothing to do with EGR or filters...
So basically, if you have this fault coming up, doing what you have said might not fix nothing...
Always better to scan the car and go from there...
Your advice can be a good shot in the dark, if you don't have meanings for scanning the car... As it can be many other suggestions...
👍👍👍
To exit economy mode its enough just to disconnect/connect battery.
Or start the engine....
Thank you for watching and for your comment!
Thank you ❤🇮🇱
👍👍👍
😭Im in tears. I bought Peugeot 3008 1.6 petrol turbo exclusive and second day engine light showed up, anti-pollution system fault . Computer always finds different problems, my car lost power,i have to accelerate to full and play with clutch,this is killer for engine.Ive been searching for same problems but never seem to find actual cause / solution for that. What should i do. I feel like I'm loosing it here. I dont consider seeling it. Can anyone pls advice/recommend anything if having same problems. I was thinking of high pressure pump replacement but checking what part pump takes in engine it seems mine all good. My car is 133k miles no paperwork😟pleaseee. Anyone know anybody' genuine in London?or i should take to Peugeot shop
What fault codes do you have ?
At this mileage the timing chain need to be changed.
Hey sorry I want to start the Peugeot 3008 but the car doesn't work .
What exactly are you expecting to get as a reply?
Because based on your comment, there is a endless different things that can cause a car not to start... 🤷♂️
Thank you for watching!
Have seem dozens of faulty pumps on these engines Peugeot end Citroen. Ask for guarantee. And skip the ECO mode its worthless.
Thanks for watching and for your comment!
``
`` NOT, NOT, NOT ... Peuge-NOT.
``
``
Scrap it. instantly.
🤣🤣🤣🤣
One of the worst engine's of modern times Bmw/Psa designed a absolute turd with these.
Is not very reliable... true...
Thank you for watching and for your comment!
it is called limp mode not economy mode..great video thank you.
It is actually economy mode...
Limp mode is a different thing...
The economy mode on peugeot and citroen, is when a big majority of the electrical systems are disabled, to prevent further battery discharge...
Limp mode, or also known as safe mode, is when the engine power is reduced due to a fault etc...
Thank you for watching and for your comment!
Its economy mode! You know little
,
, NOT, NOT, NOT ... Peuge-NOT.
,
,
,
,